概述了国内外对镁合金在高应变率加载条件下的力学行为及其高速变形时组织中绝热剪切带形成机制的研究现状,归纳了在镁合金动态力学行为及微观变形机制方面以及镁合金中形成绝热剪切带带内组织成因研究方面存在的不足.基于此,提出了镁合金动态力学行为及其在动态变形过程中微观组织演变机制的研究重点,并指出了进一步尚需开展的工作.
参考文献
| [1] | 周培基;霍普肯斯AK.材料对强冲击载荷的动态响应[M].北京:科学出版社,1986:52. |
| [2] | 包合胜;卢维娴;董新龙 等.铸镁合金ZM5 T4本构特性的宏观与微观研究[J].宁波大学学报,1999,4(01):92. |
| [3] | 张万甲;张玉松;宋春香 .MB2等四种金属材料的本构关系和动态断裂研究[J].爆炸与冲击,1995,15(01):44. |
| [4] | Huang Wen;Wang Yang;Yuan Mingxia .Effect of strain rate on the tensile properties of AZ91C[J].Journal of Materials Science Letters,2002,21(14):1113. |
| [5] | 徐伟芳 .冲击拉伸试验技术及其在镁铝合金中的应用[D].绵阳:中国工程物理研究院,2002. |
| [6] | 胡昌明 .镁铝合金（MB2）的动态力学性能研究[D].中国科学技术大学,2003. |
| [7] | 刘长海 .AZ31合金动态力学性能研究[D].辽宁工程技术大学,2005. |
| [8] | 李保成,张星,马丹.镁合金冲击性能研究[J].新技术新工艺,2005(07):54-55. |
| [9] | 沙桂英,徐永波,于涛,张修丽,韩恩厚,刘路.AZ91镁合金的动态应力-应变行为及其应变率效应[J].材料热处理学报,2006(04):77-81. |
| [10] | 张星,张治民,李保成.AZ31镁合金动态力学行为实验研究[J].弹箭与制导学报,2007(04):226-227. |
| [11] | 刘翠云,沙桂英,邢芳超,孙晓光.Mg-8%Li合金的高速冲击变形行为[J].轻合金加工技术,2009(04):50-53. |
| [12] | 黄海,黄维刚.AZ61镁合金的动态力学性能与显微分析[J].材料工程,2009(11):51-54. |
| [13] | 纪伟,范亚夫,陈捷,王军.温度对Mg-10Gd-2Y-0.5Zr合金动态拉伸行为及断裂机理的影响[J].材料工程,2009(10):41-44. |
| [14] | 廖慧敏,龙思远,蔡军.高应变率对AM60镁合金力学性能的影响[J].机械工程材料,2009(01):83-85. |
| [15] | 廖慧敏,龙思远,蔡军.应变速率对AZ91D镁合金力学行为影响[J].材料科学与工艺,2010(01):120-123. |
| [16] | 徐绍勇,龙思远,廖慧敏,曹凤红.应变速率对AZ31挤压变形镁合金力学行为的影响[J].材料热处理学报,2010(05):44-48. |
| [17] | 毛萍莉,刘正,王长义,金鑫,王峰,郭全英,孙晶.高应变速率下AZ31B镁合金的压缩变形组织[J].中国有色金属学报,2009(05):816-820. |
| [18] | T. Mukai;T. Mohri;M. Mabuchi;M. Nakamura;K. Ishikawa;K. Higashi .Experimental study of a structural magnesium alloy with high absorption energy under dynamic loading[J].Scripta materialia,1998(9):1249-1253. |
| [19] | Toshiji Mukai;Masashi Yamanoi;Hiroyuki Watanabe .Effect of Grain Refinement on Tensile Ductility in ZK60 Magnesium Alloy under Dynamic Loading[J].Materials transactions,2001(7):1177-1181. |
| [20] | Watanabe H;Mukai T;Ishikawa K et al.Realization of high strain rate superplasticity at low temperatures in a MgZn-Zr alloy[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2001,307(01):119. |
| [21] | Toshiji Mukai;Masashi Yamanoi;Kenji Higashi .Processing of Ductile Magnesium Alloy under Dynamic Tensile Loading[J].Materials transactions,2001(12):2652-2654. |
| [22] | K. Ishikawa;H. Watanabe;T. Mukai .High strain rate deformation behavior of an AZ91 magnesium alloy at elevated temperatures[J].Materials Letters,2005(12):1511-1515. |
| [23] | Yokoyama T .Impact tensile stresss-strain characteristics of wrought magnesium alloys[J].Strain,2003,39(04):167. |
| [24] | Yokoyama T .Impact tensile stress-strain characteristics of extruded magnesium alloy[J].Japanese Journal of Institute of Light Metals,2001,51(10):544. |
| [25] | Yokoyama T .Tensile and compressive properties of wrought magnesium alloy at high rates of strain[J].J De Phys IV France,2003,110(04):69. |
| [26] | El-Magd E;Abouridouane M .Influence of strain rate and temperature on the flow behavior of magnesium alloy AZ80[J].Mater Res Adv Techn,2001,92(11):1231. |
| [27] | Watanabe H;Ishikawa K .Effect of texture on high temperature deformation behavior at high strain rates in a Mg-3Al-1Zn alloy[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2009,523(1-2):304. |
| [28] | K. Ishikawa;H. Watanabe;T. Mukai .High strain rate deformation behavior of an AZ91 magnesium alloy at elevated temperatures[J].Materials Letters,2005(12):1511-1515. |
| [29] | YANG Yong-biao,WANG Fu-chi,TAN Cheng-wen,WU Yuan-yuan,CAI Hong-nian.Plastic deformation mechanisms ofAZ31 magnesium alloy under high strain rate compression[J].中国有色金属学会会刊（英文版）,2008(05):1043-1046. |
| [30] | Matthew T. Tucker;Mark F. Horstemeyer;Phillip M. Gullett .Anisotropic effects on the strain rate dependence of a wrought magnesium alloy[J].Scripta materialia,2009(3):182-185. |
| [31] | I. Ulacia;N.V. Dudamell;F. Galvez .Mechanical behavior and microstructural evolution of a Mg AZ31 sheet at dynamic strain rates[J].Acta materialia,2010(8):2988-2998. |
| [32] | Rogers H C .Adiabatic plastic deformation[J].Annual Review of Materials Science,1979,9:283. |
| [33] | Bai Y L;Dodd B.Shear localization:Occurrence,theories,and applications[M].UK:Pergamon Press,1992:24. |
| [34] | Wright T W.The physics and mathematics of adiabatic shear bands[M].Cambridge:Cambridge University Press,2002:1. |
| [35] | Xu Y B;Bai Y L;Shen L T .Formation,microstructrue and development of the localized shear deformation in low-carbon steels[J].Acta Materialia,1996,44:1917. |
| [36] | Xue Q;Gray G T;Henrie B L et al.Influence of shock prestraining on the formation of shear localization in 304 stainless steel[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2005,36:1471. |
| [37] | Xue Q;Gray G T .Development of adiabatic shear bands in annealed 316L stainless steel:Part Ⅰ.Correlation between evolving microstructure and mechanical behavior[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2006,37:2435. |
| [38] | Xue Q;Gray G T .Development of adiabatic shear bands in annealed 316L stainless steel:Part Ⅱ.TEM studies of the evolution of microstructure during deformation localization[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2006,37:2447. |
| [39] | M. A. Meyers;Y. B. Xu;Q. Xue .Microstructural evolution in adiabatic shear localization in stainless steel[J].Acta materialia,2003(5):1307-1325. |
| [40] | Xue Q;Cerreta EK;Gray GT .Microstructural characteristics of post-shear localization in cold-rolled 316L stainless steel[J].Acta materialia,2007(2):691-704. |
| [41] | Rittel D;Ravichandran G;Venkert A .The mechanical response of pure iron at high strain rates under dominant shear[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1-2):191-201. |
| [42] | Yang Y;Wang B F .Dynamic recrystallization in adiabatic shear band in α-titanium[J].Materials Letters,2006,60(17-18):2198. |
| [43] | Murr L E;Ramirez A C;Gaytan S M et al.Microstructure evolution associated with adiabatic shear bands and shear band failure in ballistic plug formation in Ti-6Al-4V targets[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2009,516(1-2):205. |
| [44] | 孙坤,王富耻,程兴旺,苗普,赵双赞.TC6钛合金不同组织绝热剪切带的形成机理[J].稀有金属材料与工程,2009(01):34-37. |
| [45] | 汪冰峰 .钛及钛合金中绝热剪切带微观结构演化及其集体行为研究[D].中南大学,2006. |
| [46] | Meyers M A;Subhash G;Kad B K et al.Evolution of microstructure and shear-band formation in α-hcp titanium[J].Mechanics of Materials,1994,17(2-3):175. |
| [47] | Q. Xue;M. A Meyers;V. F. Nesterenko .Self-organization of shear bands in titanium and Ti-6Al-4V alloy[J].Acta materialia,2002(3):575-596. |
| [48] | Andrade U R;Meyers M A;Vecchio K S et al.Dynamic recrystallization in high-strain-rate plastic deformation of copper[J].Acta Metallurgica Et Materialia,1994,42:3183. |
| [49] | A. Mishra;M. Martin .High-strain-rate response of ultra-fine-grained copper[J].Acta materialia,2008(12):2770-2783. |
| [50] | El-Magd E;Abouridouane M .Characterization,modelling and simulation of deformationand fracture behaviour of the light-weight wrought alloys under high strain rate loading[J].International Journal of Impact Engineering,2006,32:741. |
| [51] | 吴秀玲,谭成文.冲击载荷作用下AZ31镁合金中的变形局域化[J].稀有金属材料与工程,2008(06):1111-1113. |
| [52] | 杨勇彪,王富耻,谭成文,才鸿年.高应变率加载下AZ31镁合金板材变形局域化各向异性[J].南京大学学报（自然科学版）,2009(02):264-268. |
| [53] | Yang Suyuan .The microstructure features and the deformation mechanism of a fine grained magnesium alloy under dynamic loading[J].Reviews on Advanced Materials Science,2010,25:122. |
| [54] | 纪伟,范亚夫,陈捷,乔光利.Mg-Gd-Y系合金中绝热剪切带的特征[J].稀有金属材料与工程,2009(04):599-602. |
| [55] | Zhen, L.;Zou, D.L.;Xu, C.Y.;Shao, W.Z. .Microstructure evolution of adiabatic shear bands in AM60B magnesium alloy under ballistic impact[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(21/22):5728-5733. |
| [56] | Zou D L;Zhen L;Zhu Y et al.Deformed microstructure and mechanical properties of AM60B magnesium alloy under hypervelocity impact at a velocity of 4km/s[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2010(15):3323. |
| [57] | Zou D L;Zhen L;Zhu Y et al.Deformed microstructure evolution in AM60B Mg alloy under hypervelocity impact at a velocity of 5km/s[J].Materials & Design,2010,31(08):3708. |
| [58] | 沙桂英,孙晓光,刘腾,朱宇宏,冯晓刚.Mg-3.04Li-0.77Sc合金的高应变率变形局部化行为[J].材料研究学报,2010(06):567-571. |
| [59] | Tan Chengwen;Xu Shanna;Wang Lu et al.Deformation behavior of AZ31 magnesium alloy at different strain rates and temperatures[J].Transactions of Nonferrous Metals Society of China,2007,17:347. |
| [60] | Ion S E;Humphreys F J;White S H .Dynamicrec recrystallisation and the development of microstructure during the high temperature deformation of magnesium[J].Acta Metallurgica,1982,30:1909. |
| [61] | Rittel D;Wang Z G .Thermo-mechanical aspects of adiabatic shear failure of AM50 and Ti6Al4V alloys[J].Mechanics of Materials,2008,40(08):629. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%