采用丙烯酸正丁酯与苯乙烯共聚物P（nBA-co-St）胶乳为种子,通过乳液接枝共聚氯乙烯（VC）制备了P（nBA-co-St）/PVC复合树脂。粒径分析结果表明,PVC已成功地包覆在种子上,从透射电镜照片能清楚分辨出复合粒子具有核壳结构,文中合理解释了在该接枝共聚过程中显现的缓聚现象。动态力学分析结果表明,随着核层共聚物中PSt组分含量增加,复合材料在低温区的力学损耗峰逐渐移向高温方向,纯PnBA核因比PSt组分更易接枝VC,从而显著影响了复合树脂低温区的玻璃化转变温度。试样冲击断面的扫描电镜分析揭示,P（nBA-co-St）原位增韧PVC的机理源于基体的剪切屈服。
P（n-butyl acrylate-co-styrene）/poly（vinyl chloride）[P（nBA-co-St）/PVC]composite resins were prepared via seeded emulsion copolymerization of vinyl chloride（VC） using n-butyl acrylate（nBA） and styrene copolymer latex as seeds.Diameters and morphology of latex particles were characterized by laser particle size analyzer,SEM and TEM.The results demonstrate that the PVC chains successfully covered onto the P（nBA-co-St） seeds.A phenomenon of retardation polymerization appeared in VC graft copolymerizing the P（nBA-co-St） was reasonably explained.Pure PnBA core greatly influenced Tg of the composite resin in the low-temperature transition region.This result should stem from the different degrees of PnBA-or PSt-grafted PVC to cause the difference of the graft copolymer content in the resin.The fractured surface for the P（nBA-co-St）/PVC sample with 75/25 mass ratio of nBA to St units showed a ＂root or beard＂ morphology.SEM analysis confirms that toughening mechanism in the materials derives from the shear yielding of the PVC matrix.
参考文献
| [1] | S. Moulay .Chemical modification of poly(vinyl chloride)-Still on the run[J].Progress in Polymer Science,2010(3):303-331. |
| [2] | Si QB;Zhou C;Yang HD;Zhang HX .Toughening of polyvinylchloride by core-shell rubber particles: Influence of the internal structure of core-shell particles[J].European Polymer Journal,2007(7):3060-3067. |
| [3] | Kim SH.;Son WK.;Kim YJ.;Kang EG.;Kim DW.;Park CW.;Kim WG.;Kim HJ. .Synthesis of polystyrene/poly(butyl acrylate) core-shell latex and its surface morphology[J].Journal of Applied Polymer Science,2003(3):595-601. |
| [4] | 邢胜男,潘明旺,张晓蕾,李景生.P（BA-EHA）/PDCPA/PVC改性剂的合成与共混改性聚氯乙烯研究[J].河北师范大学学报(自然科学版),2007(01):77-80. |
| [5] | 武佳韦,潘明旺,袁金凤,刘通,张留成.SBA/PVC复合树脂的制备与表征[J].高分子学报,2009(07):613-619. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%