采用真空自耗电弧炉熔炼添加硼元素的Ti－1023合金铸锭，对其进行一定的变形得到锻造棒材。利用金相显微镜、电子探针、万能材料试验机等设备对其进行宏观、微观组织及性能分析，研究硼元素对铸态与锻态Ti－1023合金组织与性能的影响。研究发现，硼元素作为一种高效的细化剂，能显著细化Ti－1023合金的铸态组织。硼化物倾向于以链状析出，对合金进行充分变形，能使硼化物充分破碎。微量的硼可以显著提高钛合金的强度，当硼含量在0．1％～0．2％（质量分数）时， Ti－1023合金的抗拉强度与屈服强度变化不大，但是塑性下降明显。为了得到良好的强度－塑性匹配，最佳硼添加量不应大于0．1％。
Experimental ingots of Ti-1023 alloy with boron which were obtained by vacuum consumable arc melting furnace were forged into bars .Metallographic microscope , electron probe and mechanical tests were used to analyze macro and micro structure and performance .This paper studied the effect of boron on the microstructure and properties of Ti-1023 alloy as cast and forged .It is found that the boron as a highly effective element can significantly refine the grain size of Ti-1023 cast alloy .Borides tend to precipitate in chain shape and sufficient deformation can make TiB fully broken .Trace amount of boron can significantly increase the strength of titanium alloy and when the content of boron is between 0.1%and 0.2%( w/%) , the tensile and yield strength are barely changed while plasticity decreases signifi-cantly.To get excellent strength and plasticity match , the best boron addition amount should not be more than 0.1%.
参考文献
| [1] | 田广民;洪权;张龙;赵永庆;吴玮璐.国外大型民用客机用钛[J].钛工业进展,2008(2):19-22. |
| [2] | 韩明臣;王成长;倪沛彤.钛合金的强韧化技术研究进展[J].钛工业进展,2011(6):9-13. |
| [3] | S.I. Lieberman;H. Singh;Y. Mao.The Microstructural Characterization and Simulation of Titanium Alloys Modified with Boron[J].JOM,20071(1):59-63. |
| [4] | SHIBAYAN ROY;VEDAVYAS TUNGALA;SATYAM SUWAS.Effect of Hypoeutectic Boron Addition on the β Transus of Ti-6Al-4V Alloy[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,20119(9):2535-2541. |
| [5] | Gorsse S.;Le Petitcorps Y.;Matar S.;Rebillat F..Investigation of the Young's modulus of TiB needles in situ produced in titanium matrix composite[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20031/2(1/2):80-87. |
| [6] | 罗皓;陈志强.硼改性钛合金研究进展[J].材料开发与应用,2010(4):77-81. |
| [7] | Roy, S.;Suwas, S..Deformation mechanisms during superplastic testing of Ti-6Al-4V-0.1B alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:205-217. |
| [8] | OREST M. IVASISHIN;ROMAN V. TELIOVYCH;VOLODYMYR G. IVANCHENKO.Processing, Microstructure, Texture, and Tensile Properties of the Ti-6Al-4V-1.55B Eutectic Alloy[J].Metallurgical and materials transactions. A, physical metallurgy and materials science,20082(2):402-416. |
| [9] | Min Young Koo;Jae Sung Park;Min Kyu Park.Effect of aspect ratios of in situ formed TiB whiskers on the mechanical properties of TiB_w/Ti-6Al-4V composites[J].Scripta materialia,20127(7):487-490. |
| [10] | 孙朋朋;李士凯;孙二举;万自永;郭宁;雷小伟.锻造火次对TB6钛合金断裂韧性和高周疲劳性能的影响[J].材料开发与应用,2013(5):18-21. |
| [11] | 黄立国 .含硼钛合金高温变形及组织性能研究[D].哈尔滨工业大学,2014. |
| [12] | 邱伟;鲁世强;欧阳德来;黄旭;雷力明.铸态TB6钛合金β相区热变形行为的研究[J].锻压技术,2010(6):119-123. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%