欢迎登录材料期刊网

材料期刊网

高级检索

利用透射电镜和场发射扫描电镜研究了Hi-B钢热轧、常化和二次再结晶退火过程中抑制剂的析出情况,研究表明:热轧后抑制剂沿板厚度方向存在梯度分布现象,即表层再结晶组织、次表层(过渡层)、中心层形变组织中析出相尺寸和体积百分数存在差异;常化处理不会改变析出相的分布,但促进了AIN的析出,且调整了析出相尺寸的分布;在二次再结晶退火过程中,N_2/H_2混合气氛下,抑制剂不易熟化、分解,一直保持强的抑制效果,致使二次再结晶开始温度滞后至1013℃.

The precipitation during hot-rolling, normalization and secondary recrystallization annealing in a Hi-B steel containing MnS and AlN as inhibitors was investigated by TEM and SEM. The results show that the distribution of precipitates and their volume fraction changed along the thickness of hot-rolled sheet. The distribution of precipitates in three typical layers, which were the surface layer with completely recrystallized microstructure, the subsurface layer (or transition layer) and the center layer with deformed structure, respectively, was discussed. The normalization process after hot rolling did not change the distribution of precipitates but promoted new fine A1N to appear and kept precipitates in suitable size to exert strong Zener pinning force. The number of inhibitors kept constant and AlN particles were not easy to discompose due to the N2 from protecting atmosphere during secondary recrystalliztion annealing, which led to postpone the onset temperature of secondary recrystallization to 1013℃.

参考文献

[1] Shigeru Suzuki;Yoshiyuki Ushigami;Hotaka Homma .Influence of Metallurgical Factors on Secondary Recrystallization of Silicon Steel[J].Materials transactions,2001(6):994-1006.
[2] 王若平,黎世德,方泽民,毛炯辉,李平和,许光.低温热轧高磁感取向硅钢板常化组织及析出相研究[J].金属热处理,2009(06):9-14.
[3] 朱业超,毛炯辉,王若平,乔学亮.析出相质点对取向硅钢二次再结晶的影响[J].金属热处理,2009(06):29-32.
[4] 张颖,傅耘力,汪汝武,吴开明.高磁感取向硅钢中的抑制剂[J].中国冶金,2008(11):4-8,29.
[5] 蒙肇斌,赵宇,何忠治.高磁感取向硅钢常化处理过程中氮化物的沉淀[J].特殊钢,1999(01):24-26.
[6] 蒙肇斌,赵宇,何忠治.高磁感取向硅钢中抑制剂质点硫化物与A1N析出形态的研究[J].金属功能材料,1997(01):34.
[7] 夏兆所,康永林,倪献娟,周谊军,王全礼.板坯加热温度对低温技术取向电工钢抑制剂与磁性的影响[J].北京科技大学学报,2009(04):439-444.
[8] Jenkins K;Lindenmo M .Precipitates in electrical steels[J].Journal of Magnetism and Magnetic Materials,2008(20):2423-2429.
[9] Taisei Nakayama;Noriyuki Honjou .Effect of aluminum and nitrogen on the magnetic properties of non-oriented semi-processed electrical steel sheet[J].Journal of Magnetism and Magnetic Materials,2000(1/2):87-94.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%