对2209双相不锈钢焊缝在690℃进行不同时间时效处理,采用了透射(TEM)、相分析、冲击测试等手段,研究了析出相的形貌、分布及其类型和含量以及析出相对冲击功的影响.结果表明,析出相为M23C6和σ相,主要在铁素体和奥氏体晶界和铁素体内析出.随着时效时间的延长,析出相逐渐长大并增多,冲击功逐渐降低.在扫描电镜下观察冲击断口形貌为韧窝和准解理,断裂类型由韧性到脆性断裂.
参考文献
| [1] | 陈嘉砚,杨卓越,杨武,苏杰,罗丰华.双相不锈钢中σ相的形成特点及其对性能的影响[J].钢铁研究学报,2006(08):1-4. |
| [2] | 王月香,程逸明,刘振宇,方轶流,王国栋.2205双相不锈钢中σ相的析出规律[J].钢铁研究学报,2009(10):51-54. |
| [3] | 缪乐德,张毅,邬君飞.不同热处理状态下2205双相不锈钢中析出相变化的讨论[J].冶金分析,2011(04):1-8. |
| [4] | Chandraa K;Rahul Singhal;Kaina V et al.Low Temperature Embrittlement of Duplex Stainless Steel:Correlation Between Mechanical and Electrochemical Behavior[J].Materials Scienceand Engineering A,2010,527:3904. |
| [5] | Sathirachinda N;Pettersson R;Pan J .Depletion Effects at Phaseboundaries in 2205 Duplex Stainless Steel Characterised With SKPFM and TEM/EDS[J].Corrosion Science,2009,51:1850. |
| [6] | Maehara Y;Masao K;Fujino N .Precipitation of d Phase Precipitation in 25Cr-7Ni-3Mo Duplex Phase Stainless Steels[J].Transactions ISIJ,1983,23(03):240. |
| [7] | Nilsson J O .Super Duplex Stainless Steel[J].Material Scienceand Technology,1992,8(08):685. |
| [8] | Yutaka S S;Kokawa H .Preferential Precipitation Site of Sigma Phase in Duplex Stainless Steel Weld Metal[J].Scripta Metallurgica et Materialia,1999,40(06):659. |
| [9] | Karlsson L;Ryen L;Pak s .Precipitation of IntermetallicPhases in 22% Cr Duplex Stainless Weld Metals[J].Welding Journal,1995,38(06):28. |
| [10] | 吴玖.双相不锈钢[M].北京:冶金工业出版社,1999 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%