通过在Gleeble-1500热模拟试验机进行高温压缩试验,以实验得到316LN奥氏体不锈钢真应力-真应变曲线为基础,并结合高温变形显微组织,对其动态再结晶行为进行研究,从而得到热激活能Q、热变形方程以及动态再结晶的基本规律,初步建议在生产轧制过程中,将轧制温度控制在1050℃左右,应变速率小于0.01 s-1为宜,为该产品生产提供了重要依据.
参考文献
| [1] | Kruml T;Polak J;Degallaix S .Micorstructure in 316LN stainless steel fatigued at low temperature[J].Materials Science and Engineering A,2000,293(1/2):275. |
| [2] | Miwa Y;Tsukada T;Jitsukawa S .SCC behavior of solid-HIPed and irradiated type 316LN-IG stainless steel in oxygenated or hydrogenated water at 423-603 K[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2007(b):1175-1179. |
| [3] | 刘宝胜,李国栋,卫英慧.奥氏体不锈钢中σ相析出及其对性能影响的研究进展[J].钢铁研究学报,2014(01):1-6. |
| [4] | 郭东,刘宝胜,李国栋,侯利锋,卫英慧,刘承志.Sigma相对316不锈钢在熔融镁合金保护气中腐蚀行为的影响[J].太原理工大学学报,2013(03):321-325. |
| [5] | Baofeng Guo;Haipeng Ji;Xingang Liu;Lu Gao;Rongmei Dong;Miao Jin;Qinghua Zhang .Research on Flow Stress During Hot Deformation Process and Processing Map for 316LN Austenitic Stainless Steel[J].Journal of Materials Engineering and Performance,2012(7):1455-1461. |
| [6] | 柏永青,陈明明,陈慧琴.316LN热变形行为及动态再结晶晶粒的演变规律[J].太原科技大学学报,2009(05):424-427. |
| [7] | 潘品李,钟约先,马庆贤,袁朝龙,罗晋平.316LN钢多道次变形条件下的动态再结晶行为[J].塑性工程学报,2011(05):13-18. |
| [8] | 项建英,宋仁伯,任培东.316L不锈钢动态再结晶行为[J].北京科技大学学报,2009(12):1555-1559. |
| [9] | 李红,罗海文,杨才福,方旭东.奥氏体不锈钢热轧加工性能的数学模型研究[J].材料导报,2006(10):102-106. |
| [10] | E. I. POLIAK;J. J. JONAS .Initiation of Dynamic Recrystallization in Constant Strain Rate Hot Deformation[J].ISIJ International,2003(5):684-691. |
| [11] | McQueen H J;Yue S;Ryan N D et al.Hot working characteristics of steels in austenitic state[J].Journal of Materials Processing Technology,1995,53:293-310. |
| [12] | S.F.MEDINA;C.A.HERNANDEZ .MODELLING OF THE DYNAMIC RECRYSTALLIZATION OF AUSTENITE IN LOW ALLOY AND MICROALLOYED STEELS[J].Acta materialia,1996(1):165-171. |
| [13] | Zenre C;Hollomon J H .Effect of strain-rate upon the plastic flow of steel[J].Journal of Applied Physics,1944,15(01):22-32. |
| [14] | Srinivasa N;Prasad Y .Hot working characteristics of nimonic 75,80A and 90 superalloys:a comparison using processing maps[J].Journal of Materials Processing Technology,1995,51:171-192. |
| [15] | Shuhuai Lan;Hey-Jin Lee;Soo-Hun Lee;Jun Ni;Xinmin Lai;Hyoung-Wook Lee;Jung-Han Song;Moon G. Lee .Experimental and numerical study on the viscoelastic property of polycarbonate near glass transition temperature for micro thermal imprint process[J].Materials & design,2009(9):3525-3536. |
| [16] | Kocks U F;Meeking H A.Mechanism for Static and Dynamic Recovery Strength of Metals and Alloys[M].Oxford:Pergamon Press,1979 |
| [17] | 杨刚;孙利军;张丽娜 等.形变孪晶的消失于退火孪晶的形成机制[J].钢铁研究学报,2009,21(02):39-43. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%