采用真空熔炼的方法制备了Cu-0.1Ag-0.26Cr合金,通过显微硬度、电导率测试等方法,对合金的时效性能进行了研究,利用Avrami方程结合时效过程中电导率的变化分析了合金的相变动力学.结果表明:试验合金在450℃时效2h达到电导率和显微硬度的良好结合,导电率87.36%IACS,显微硬度125 HV;合金在500℃时效时的相变动力学方程为f=1- exp( -0.1305t0.3709),导电率方程为σ=54.82+ 35.33×(1- exp(-0.1305t0.3709)).
参考文献
[1] | Xie M.;Lu XY.;Shi A.;Den ZM.;Jang H.;Zheng FQ.;Liu JL. .Investigation on the Cu-Cr-RE alloys by rapid solidification[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(0):529-533. |
[2] | S. G. Jia;P. Liu;F. Z. Ren;B. H. Tian;M. S. Zheng;G. S. Zhou .Sliding wear behavior of copper alloy contact wire against copper-based strip for high-speed electrified railways[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2007(7/8):772-777. |
[3] | 赵冬梅,董企铭,刘平,康布熙,黄金亮,金志浩.Aging transformation in Cu-3.2Ni-0.75Si alloy[J].中国有色金属学会会刊(英文版),2003(02):258-261. |
[4] | D. H. He;R. R. Manory;N. Gardy .Wear of railway contact wires against current collector materials[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,1998(1/2):146-155. |
[5] | Song K;Xing J;Liu P et al.Optimization of the processing parameters during internal oxidation of Cu-Al alloy powders using an artificial neural network[J].Materials & Design,2005,26(04):337-343. |
[6] | D. Raabe;K. Miyake;H. Takahara .Processing, microstructure, and properties of ternary high-strength Cu-Cr-Ag in situ composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1/2):186-197. |
[7] | S.G. Jia;P. Liu;F.Z. Ren;B.H. Tian;M.S. Zheng;G.S. Zhou .Wear behavior of Cu-Ag-Cr alloy wire under electrical sliding[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):262-267. |
[8] | 贾淑果,郑茂盛,周根树.Cr对Cu-Ag-Cr合金再结晶行为的影响[J].金属热处理,2005(z1):242-245. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%