采用真空烧结工艺制备了Ti(C, N)基金属陶瓷,通过XRD、TEM和SEM等手段研究碳纳米管(CNTs)对金属陶瓷组织和性能的影响.结果表明:与未加碳纳米管的基体组织相比,添加CNTs的金属陶瓷组织中具有"白芯-灰壳"结构的小颗粒大大增加,金属陶瓷晶粒逐渐细化且分布均匀;当CNTs添加量(质量分数)为0.5%时,Ti(C, N)基金属陶瓷的硬度可达90.9HRA;金属陶瓷的抗弯强度比未加碳纳米管的试样提高14.1%,可达2 180.7 MPa,其强化机制主要为细晶强化;金属陶瓷的断裂韧性比未加碳纳米管的试样提高18.5%,可达14.7 MPa·m1/2,CNTs对金属陶瓷强韧化机制主要为桥联作用、拔出效应和裂纹偏转作用.
参考文献
| [1] | CLARK E B;ROEBUCK B .Extending the application areas for titanium carbonitride cermets[J].International Journal of Refractory Metals and Hard Materials,1992,11(01):23-33. |
| [2] | MOSKOWITZ D;TERNER L L;HUMENIK J .Some physical and metal-cutting properties of titanium carbonitride base materials[J].Science of Hard Materials,1986,5(75):605-617. |
| [3] | P. ETTMAYER;H. KOLASKA;W. LENGAUER .Ti(C,N) Cermets -Metallurgy and Properties[J].International Journal of Refractory Metals & Hard Materials,1995(6):343-351. |
| [4] | HIDEAKI M;FUJITA Y .Applications of rigid and super-hard materials[J].Bulletin of the Japan Institute of Metals,1990,29(12):1008-1018. |
| [5] | LIJIMA S .Helical microtubules of graphitic carbon[J].Nature,1991,354(6348):56-58. |
| [6] | XIE Xiao-lin;MAI Yiu-wing;ZHOU Xing-ping .Dispersion and alignment of carbon nanotubes in polymer matrix[J].Materials Science and Engineering R:Reports,2005,49(04):89-112. |
| [7] | Yi Feng;Hai Long Yuan;Min Zhang .Fabrication and properties of silver-matrix composites reinforced by carbon nanotubes[J].Materials Characterization,2005(3):211-218. |
| [8] | J. -W. An;D. -H. You;D. -S. Lim .Tribological properties of hot-pressed alumina-CNT composites[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2003(1/6):677-681. |
| [9] | Cs. Balazsi;Z. Konya;F. Weber;L. P. Biro;P. Arato .Preparation and characterization of carbon nanotube reinforced silicon nitride composites[J].Materials science & engineering, C. Biomimetic and supramolecular systems,2003(6/8):1133-1137. |
| [10] | Y. KATSUDA;P. GERSTEL;J. NARAYANAN .Reinforcement of precursor-derived Si-C-N ceramics with carbon nanotubes[J].Journal of the European Ceramic Society,2006(15):3399-3405. |
| [11] | 李燕,刘宁.CNTs-Ti（C,N）-WC-Co金属陶瓷材料的制备与力学性能[J].材料热处理学报,2009(04):25-28,33. |
| [12] | 李勇 .添加碳纳米管对Ti（C，N）基金属陶瓷显微组织和力学性能的影响[D].合肥工业大学,2007. |
| [13] | 王健雄 .碳纳米管的制备、纯化及其复合镀层研究[D].湖南大学,2002. |
| [14] | Xu T;Yang JH;Liu JW;Fu Q .Surface modification of multi-walled carbon nanotubes by O-2 plasma[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2007(22):8945-8951. |
| [15] | 李霞 .MWNTs/PBO复合纤维的合成及PBO聚合机制研究[D].哈尔滨工业大学,2006. |
| [16] | ZHENG Yong;LIU Wen-jun;WANG Sheng-xiang;XIONG Wei-hao .Effect of carbon content on the microstructure and mechanical properties of Ti(C,N)-based cermets[J].Ceramics International,2004,30(08):2111-2115. |
| [17] | J. Zackrisson;H.-O. Andren .Effect of carbon content on the microstructure and mechanical properties of (Ti, W, Ta, Mo)(C,N)-(Co, Ni) cermets[J].International Journal of Refractory Metals & Hard Materials,1999(4):265-273. |
| [18] | TREACY M M J;EBBESEN T W;GIBSON J M .Exceptionally high Young's modulus observed for individual carbon nanotubes[J].Nature,1996,381(6584):678-680. |
| [19] | 刘文俊,郑勇,熊惟皓.Ti（C,N）金属陶瓷中纳米粉含量对组织和性能的影响[J].粉末冶金技术,2005(05):334-338. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%