基于元胞自动机理论对ZrB2/（W,Ti）C陶瓷复合材料进行了模拟,并对其进行了相关实验验证。模拟结果表明,随着（W,Ti）C含量的增加,晶粒的形貌不断地发生演化,（W,Ti）C加入的比例较合理时晶粒大小合适并分布比较均匀。实验结果表明,晶粒的尺寸随模拟的变化规律与实际情况较为吻合,利用元胞自动机理论进行复合材料的模拟,可以很好地模拟复合材料的微观组织演化。
The simulation of the microstructure for ZrB2/(W,Ti)C composite materials based on the cellular automata theory and related experiments were presented.The simulation results showed that the morphology of the grain was changed with the increases of(W,Ti)C content.The grain size distribution is more suitable and homogeneous in the composite with a reasonable(W,Ti) C proportion.The test results showed that the changing rule of simulation basically agree with the test data.Simulation of composite materials based on the cellular automata theory can achieve good effect for the microstructure evolution.
参考文献
| [1] | Melendez-Martinez J J;Dominguez-Rodriguez A;Monteverde F et al.Characterisation and high temperature mechanical properties of zirconium boride-based materials[J].Journal of the European Ceramic Society,2002,22(14-15):2543-2549. |
| [2] | Frederic Monteverde;Alida Bellosi .Effect of the addition of silicon nitride on sintering behaviour and microstructure of zirconium diboride[J].Scripta materialia,2002(3):223-228. |
| [3] | Luigi Scatteia;Davide Alfano;Frederic Monteverde .Effect of the Machining Method on the Catalycity and Emissivity of ZrB_2 and ZrB_2-HfB_2-Based Ceramics[J].Journal of the American Ceramic Society,2008(5):1461-1468. |
| [4] | Monteverde F .The addition of SiC particles into a MoSiz-doped ZrB2 matrix:effects on densifieation,microstruc-ture and thermo-physical properties[J].Materials Chem istry and Physics,2009,113(2-3):626-633. |
| [5] | Li Bin;Deng Jianxin;Li Yousheng .Oxidation behavior and mechanical properties degradation of hot-pressed A12 03/ZrB2/ZrO2 ceramic composites[J].International Journal of Refractory Metals and Hard Materials,2009,27(04):747-753. |
| [6] | T.A. Parthasarathy;R.A. Rapp;M. Opeka .A model for the oxidation of ZrB_2, HfB_2 and TiB_2[J].Acta materialia,2007(17):5999-6010. |
| [7] | Shi G. Zhang;Greg E. Hilmas;William G. Fahrenholtz .Pressureless Sintering of ZrB_2-SiC Ceramics[J].Journal of the American Ceramic Society,2008(1):26-32. |
| [8] | Kim T;Goto T;Lee B .Microstructure control and me-chanical properties of fibrous A1203/ZrO2 composites fabricated by extrusion process[J].Scripta Materialia,2005,52(08):725-729. |
| [9] | Diletta Sciti;Frederic Monteverde;Stefano Guicciardi .Microstructure and mechanical properties of ZrB_2-MoSi_2 ceramic composites produced by different sintering techniques[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1/2):303-309. |
| [10] | Ashok Kumar Srivastava;Karabi Das .Microstructure and abrasive wear study of (Ti,W)C-reinforced high-manganese austenitic steel matrix composite[J].Materials Letters,2008(24):3947-3950. |
| [11] | A. Saidi;M. Barati .Production of (W, Ti)C reinforced Ni-Ti matrix composites[J].Journal of Materials Processing Technology,2002(1/2):166-170. |
| [12] | 王昊,廖聪维,吴保磊,叶雪枫,杨晓非.基于元胞自动机的薄膜磁滞回线的计算机模拟[J].功能材料,2007(01):26-28. |
| [13] | Montheillet F.;Gilormini P. .PREDICTING THE MECHANICAL BEHAVIOR OF TWO-PHASE MATERIALS WITH CELLULAR AUTOMATA[J].International Journal of Plasticity,1996(4):561-574. |
| [14] | Gilormini P;Montheillet F .Deformation of an inclusion in a viscous matrix and induced stress concentrations[J].Journal of the Mechanics and Physics of Solids,1986,34(02):97-123. |
| [15] | Li Bin.Design and development of in-situ reaction self- lubricating ceramic tools and study on their antifriction mechanisms IDa[M].济南:山东大学,2010 |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%