用改进的sol-gel工艺制备了细晶钛酸锶钡(Ba0.6Sr0.4TiO3,BST)陶瓷块体,研究了BST陶瓷的结晶与介电性能.在这种改进sol-gel的工艺中,用传统的固相反应煅烧形成BST粉体,经高能球磨制备BST纳米陶瓷粉体,再将一定质量的纳米粉体加入到相同化学组成的BST的溶胶液中,经普球球磨12h后,制备成悬浮性好,分散均匀的浆料.浆料可用来制备BST陶瓷,并在1200℃保温2h烧结成瓷,结果显示,BST陶瓷块体结构致密,晶粒尺寸在0.15～2μm之间.分析了样品的介电性能和晶粒尺寸对材料介电性能的影响.介电温谱显示,在0℃,100kHz时,相对介电常数为2500,介电损耗为0.02;并且存在明显的弥散相变.
参考文献
| [1] | Sengupta L C;Drach W C.[J].Ferroelectrics,1994(153):359-364. |
| [2] | Sung Min Rhim;Seokmin Hong;Heungjin Bak;Ok Kyung Kim .Effects of B{sub}2O{sub}3 addition on the dielectric and ferroelectric properties of Ba{sub}0.7Sr{sub}0.3TiO{sub}3 ceramics[J].Journal of the American Ceramic Society,2000(5):1145-1148. |
| [3] | Zhu W.;Akbar SA.;Asiaie R.;Wang CC. .FAST-SINTERING OF HYDROTHERMALLY SYNTHESIZED BATIO3 POWDERS AND THEIR DIELECTRIC PROPERTIES[J].Journal of Materials Science,1997(16):4303-4307. |
| [4] | Sung Min Rhim;Heungjin Bak .Effects of Heating Rate on the Sintering Behavior and the Dielectric Properties of Ba_(0.7)Sr_(0.3)TiO_3 Ceramics Prepared by Boron-Containing Liquid-Phase Sintering[J].Journal of the American Ceramic Society,2000(12):3009-3013. |
| [5] | 栾伟玲,高濂,郭景坤.细晶粒BaTiO3陶瓷的微结构及介电性能测试[J].无机材料学报,2000(06):1043-1049. |
| [6] | 郑水林.超细粉体加工技术与应用[M].北京:化学工业出版社,2004 |
| [7] | Yao Xi;Chen Zhili;Cross L E .[J].Journal of Applied Physics,1983,54:3399. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%