功能材料, 2004, 35(z1): 2628-2631.
微米级石英空心小球表面TiO2薄膜的制备及其降解性能的研究
姚伟峰 1, , 王弘 2, , 黄柏标 低碳钢为实验原料，采用不同卷取温度和冷轧压下率进行工业实验，研究了卷取温度和冷轧压下率对深冲板组织和性能的影响。结果表明，卷取温度为570 ℃和600 ℃时，深冲板的组织为饼形晶粒；卷取温度为660 ℃和680 ℃时，深冲板的组织为等轴晶粒；卷取温度为600 ℃时，深冲板的综合性能最佳。压下率在75%时深冲板的综合性能最佳，此时rm为183，Δr为056。","authors":[{"authorName":"刘兴全","id":"a4f82612-8e1d-431d-b1e1-88abc48ec004","originalAuthorName":"刘兴全"},{"authorName":"刘雅政","id":"16bb4ecb-834b-4058-aa20-7311451500be","originalAuthorName":"刘雅政"},{"authorName":"洪继要","id":"ed4d1d1c-2ea7-4f56-bfba-a60b402fc45d","originalAuthorName":"洪继要"}],"categoryName":"|","doi":"","fpage":"18","id":"b32436a1-f02a-485e-8c2a-8b2c9abe101a","issue":"2","journal":{"abbrevTitle":"GTYJXB","coverImgSrc":"journal/img/cover/GTYJXB.jpg","id":"30","issnPpub":"1001-0963","publisherId":"GTYJXB","title":"钢铁研究学报"},"keywords":[{"id":"f82d3e25-5b33-4eb2-a2da-70bb07ae187a","keyword":"低碳钢;卷取温度;冷轧压下率","originalKeyword":"低碳钢;卷取温度;冷轧压下率"}],"language":"zh","publisherId":"1001-0963_2009_2_3","title":"卷取温度和冷轧压下率对CSP流程深冲板组织性能的影响","volume":"21","year":"2009"},{"abstractinfo":"以低碳钢为实验原料,采用不同卷取温度和冷轧压下率进行工业实验,研究了卷取温度和冷轧压下率对深冲板组织和性能的影响.结果表明,卷取温度为570℃和600℃时,深冲板的组织为饼形晶粒;卷取温度为660℃和680℃时,深冲板的组织为等轴晶粒;卷取温度为600℃时,深冲板的综合性能最佳.压下率在75%时深冲板的综合性能最佳,此时rm为1.83,△r为0.56.","authors":[{"authorName":"刘兴全","id":"7a940f8e-358d-481d-a596-15f62b85f4d4","originalAuthorName":"刘兴全"},{"authorName":"刘雅政","id":"6b05f9f4-2745-44c6-9b74-b916a14c9f3d","originalAuthorName":"刘雅政"},{"authorName":"洪继要","id":"af5954b2-5ee8-4500-8142-b990d8f3ee9a","originalAuthorName":"洪继要"}],"doi":"","fpage":"18","id":"37adbb05-1927-4d8e-bee9-9c792dac116d","issue":"2","journal":{"abbrevTitle":"GTYJXB","coverImgSrc":"journal/img/cover/GTYJXB.jpg","id":"30","issnPpub":"1001-0963","publisherId":"GTYJXB","title":"钢铁研究学报"},"keywords":[{"id":"0fd6626e-a2b4-4ed7-8998-dc322833147b","keyword":"低碳钢","originalKeyword":"低碳钢"},{"id":"d955fcc1-6b5f-4f17-89e5-3a303d393d1f","keyword":"卷取温度","originalKeyword":"卷取温度"},{"id":"e3a41988-04f8-4ac2-ba20-d58fe625134b","keyword":"冷轧压下率","originalKeyword":"冷轧压下率"}],"language":"zh","publisherId":"gtyjxb200902005","title":"卷取温度和冷轧压下率对CSP流程深冲板组织性能的影响","volume":"21","year":"2009"},{"abstractinfo":"以不同卷取温度(分别为670℃和710℃)工业生产的高强度IF钢热轧板为研究材料,进行了不同冷轧压下率(分别为55％、65％、75％和85％)的实验室冷轧试验,结合连续热镀锌线的工艺特点进行了盐浴退火试验,采用金相和力学性能测试方法,研究了热轧卷取温度和冷轧压下率对高强度IF钢力学性能的影响.结果表明,较低温度卷取时,热轧卷晶粒尺寸较细,冷轧退火态晶粒尺寸相对较粗,rm值相对较低.冷轧退火态仍具有较细小的晶粒,但屈服强度明显降低,这与间隙碳原子在退火过程通过NbC粗化被大量清除有关.卷取温度对试验钢冷轧退火态的强度、断后伸长率和nm值几乎没有影响.随着冷轧压下率从55％增加到75％时,退火后铁素体晶粒尺寸变化不明显,当冷轧压下率进一步增加到85％时,铁素体晶粒尺寸有所减小.冷轧压下率对强度和断后伸长率影响较小,对nm值没有影响,而rm值随着冷轧压下率的提高而提高.","authors":[{"authorName":"郑之旺","id":"c2fbfe06-9601-441d-856c-279cd9d3253f","originalAuthorName":"郑之旺"},{"authorName":"王敏莉","id":"c4f21d69-2ed8-4a14-b402-92efc7d6e7f3","originalAuthorName":"王敏莉"},{"authorName":"李叙生","id":"c4458bb9-60d6-43f1-9c86-3204715005cb","originalAuthorName":"李叙生"}],"doi":"","fpage":"40","id":"8e83ac25-33b2-419e-b6e2-3f5253c82030","issue":"3","journal":{"abbrevTitle":"GTFT","coverImgSrc":"journal/img/cover/gtft1.jpg","id":"28","issnPpub":"1004-7638","publisherId":"GTFT","title":"钢铁钒钛"},"keywords":[{"id":"4f80ba8f-1146-4b11-9e61-d84d7717e9d7","keyword":"高强度IF钢","originalKeyword":"高强度IF钢"},{"id":"f2df5847-6dab-4787-9222-eb83668dcd0b","keyword":"卷取温度","originalKeyword":"卷取温度"},{"id":"d0d8b73e-71d2-4f3f-8a6f-7501ac9a644a","keyword":"冷轧压下率","originalKeyword":"冷轧压下率"},{"id":"710bc754-b256-426c-ade1-07d23ece8833","keyword":"显微组织","originalKeyword":"显微组织"},{"id":"808ac11a-6af7-4d2b-8081-d288303d83c8","keyword":"力学性能","originalKeyword":"力学性能"}],"language":"zh","publisherId":"gtft201103009","title":"卷取温度和冷轧压下率对高强度IF钢力学性能的影响","volume":"32","year":"2011"},{"abstractinfo":"在实验室工艺条件下,研究了冷轧压下率对微钛处理的低碳钢板的平面各向异性的影响,对不同压下率下钢板的典型织构进行了比较,并对压下率和钛共同作用,影响平面各向异性的机理进行了分析.结果表明,钛含量和冷轧压下率对钢板的平面各向异性都有较大影响.","authors":[{"authorName":"朱晓东","id":"5c69bcf3-1223-4c6f-b427-0a044870868d","originalAuthorName":"朱晓东"}],"doi":"","fpage":"20","id":"23428db1-5ad4-4324-8367-e1aadd04486d","issue":"1","journal":{"abbrevTitle":"GTYJXB","coverImgSrc":"journal/img/cover/GTYJXB.jpg","id":"30","issnPpub":"1001-0963","publisherId":"GTYJXB","title":"钢铁研究学报"},"keywords":[{"id":"c96e500e-696a-498e-88d3-b631d85dec3a","keyword":"低碳钢","originalKeyword":"低碳钢"},{"id":"5f2b83b5-2d9b-4236-9d5b-0fc7207fafc5","keyword":"平面各向异性","originalKeyword":"平面各向异性"},{"id":"bc3c3da4-f0e0-40c5-b09f-5947c1259319","keyword":"冷轧压下率","originalKeyword":"冷轧压下率"},{"id":"00468fe6-b4cb-4c39-9d5b-da2c8a183692","keyword":"织构","originalKeyword":"织构"}],"language":"zh","publisherId":"gtyjxb200301005","title":"冷轧压下率对微钛处理的低碳钢平面各向异性的影响","volume":"15","year":"2003"},{"abstractinfo":"运用拉伸、金相、析出物定量分析、SEM、TEM和EDS等测试方法,对不同卷取温度低碳钢组织性能及硫化物析出进行研究.结果表明:随着卷取温度的升高,钢的强度和晶粒度等级下降.MnS析出主要分2个阶段:第1阶段主要为奥氏体区MnS和Al2O3的复合析出,析出尺寸普遍介于1～5μm之间,形状为条片状;第2阶段为MnS在卷取过程中析出,尺寸普遍介于200～600nm之间,形状为近球形.卷取温度的变化对化合硫含量以及MnS析出尺寸分布范围影响较小.","authors":[{"authorName":"王岩","id":"c274a304-b3a6-417d-9843-0b179ff6547d","originalAuthorName":"王岩"},{"authorName":"赵爱民","id":"faeb0480-d486-4ef5-ba01-786749c3454a","originalAuthorName":"赵爱民"},{"authorName":"陈银莉","id":"30bd09d5-df7a-40cf-96ab-8efc04e240a0","originalAuthorName":"陈银莉"},{"authorName":"左碧强","id":"888aef30-42d9-4308-aab6-470304d7fcb8","originalAuthorName":"左碧强"},{"authorName":"薛俊平","id":"cd405763-e42a-49c5-9532-c786c78db2e0","originalAuthorName":"薛俊平"}],"doi":"","fpage":"60","id":"0437cdbd-ea1c-4f3c-b4e1-ffd875d1eb31","issue":"1","journal":{"abbrevTitle":"GT","coverImgSrc":"journal/img/cover/GT.jpg","id":"27","issnPpub":"0449-749X","publisherId":"GT","title":"钢铁"},"keywords":[{"id":"c8df747f-6c6a-4581-8f21-9a26636704bf","keyword":"卷取温度","originalKeyword":"卷取温度"},{"id":"2158b7e4-0d08-4d8e-af58-8a543dccab24","keyword":"MnS","originalKeyword":"MnS"},{"id":"8cdf67a3-3cd3-41e2-93cb-aac65954634c","keyword":"析出","originalKeyword":"析出"},{"id":"52127db1-d6d7-44f4-9cb4-c2d2996c4667","keyword":"SPHC","originalKeyword":"SPHC"}],"language":"zh","publisherId":"gt201101012","title":"不同卷取温度低碳钢性能及硫化物析出的研究","volume":"46","year":"2011"},{"abstractinfo":"摘 要：运用拉伸、金相、析出物定量分析、SEM、TEM和EDS等测试方法，对不同卷取温度低碳钢组织性能及硫化物析出进行研究。结果表明：随着卷取温度的升高，钢的强度和晶粒度等级下降。MnS析出主要分两个阶段：第一阶段主要为奥氏体区MnS和Al2O3的复合析出，析出尺寸普遍介于1μm-5μm之间，形状为条片状；第二阶段为MnS在卷取过程中析出，尺寸普遍介于200nm-600nm之间，形状为近球形。卷取温度的变化对化合S含量以及MnS析出尺寸分布范围影响较小。","authors":[{"authorName":"王岩\t赵爱民\t陈银莉\t左碧强\t薛俊平","id":"c96183cf-f6da-49a8-91ad-59602d8d5dd0","originalAuthorName":"王岩\t赵爱民\t陈银莉\t左碧强\t薛俊平"}],"categoryName":"|","doi":"","fpage":"60","id":"58d512e6-5edf-4bf1-ad1d-249fd945c368","issue":"1","journal":{"abbrevTitle":"GT","coverImgSrc":"journal/img/cover/GT.jpg","id":"27","issnPpub":"0449-749X","publisherId":"GT","title":"钢铁"},"keywords":[{"id":"fe5b8931-d485-4a75-bc62-f452dc1b000b","keyword":"卷取温度;MnS;析出;SPHC","originalKeyword":"卷取温度;MnS;析出;SPHC"}],"language":"zh","publisherId":"0449-749X_2011_1_10","title":"不同卷取温度低碳钢性能及硫化物析出的研究","volume":"46","year":"2011"},{"abstractinfo":"介绍了冷轧低碳钢A1008的生产工艺,指出控制钢水中碳含量和夹杂物含量是生产顺行和产品质量保证的关键.终轧温度、卷取温度和退火温度的控制是影响最终性能和硬度的主要因素.通过综合分析检验,研制开发的冷轧低碳钢A1008的各项性能均满足标准要求.","authors":[{"authorName":"栾彩霞","id":"d18106c7-3564-4723-8078-9934a67c74be","originalAuthorName":"栾彩霞"}],"doi":"10.3969/j.issn.1001-7208.2012.03.012","fpage":"54","id":"e88bbb1f-ca8f-4e54-af52-08e7a728ca36","issue":"3","journal":{"abbrevTitle":"SHJS","coverImgSrc":"journal/img/cover/SHJS.jpg","id":"59","issnPpub":"1001-7208","publisherId":"SHJS","title":"上海金属"},"keywords":[{"id":"cd196783-8e53-4286-a1b4-f98d046c5ea0","keyword":"冷轧","originalKeyword":"冷轧"},{"id":"61672f4b-fbef-426f-97be-81f5bdd3cc93","keyword":"低碳钢","originalKeyword":"低碳钢"},{"id":"f33a1693-6488-431c-af84-93a42c96cb48","keyword":"夹杂物含量","originalKeyword":"夹杂物含量"},{"id":"cb1b520e-4a83-4f77-9fc0-84e04f31ecb6","keyword":"硬度","originalKeyword":"硬度"}],"language":"zh","publisherId":"shjs201203012","title":"冷轧低碳钢A1008的研制","volume":"34","year":"2012"},{"abstractinfo":"采用Gleeble-3500型热模拟试验机研究了变形温度和压下量对SS400低碳钢热压缩变形后显微组织的影响。结果表明：SS400钢在变形温度为850，800，775和750。C及压下量为20％，40％和60％的条件下变形后，组织由铁素体和珠光体组成，其中铁素体晶粒形貌分别为针状、等轴状和长条状；随着变形温度的降低、压下量的增加，铁素体晶粒尺寸减小，体积分数增加，最大值为79．2％，最小值约45％。","authors":[{"authorName":"李雯雯","id":"9dd021b8-d101-4733-a394-9603b9fc4b1b","originalAuthorName":"李雯雯"},{"authorName":"张春玲","id":"2b690e78-116d-4f86-8e1d-63657ef662cd","originalAuthorName":"张春玲"},{"authorName":"史东日","id":"fcb7041d-752e-48b7-b8cc-6a306c942195","originalAuthorName":"史东日"},{"authorName":"蔡大勇","id":"7e870a07-b183-430a-aabd-26a3c5e4cc32","originalAuthorName":"蔡大勇"},{"authorName":"廖波","id":"aaff92a1-cdcb-4d57-a001-313630edccf0","originalAuthorName":"廖波"}],"doi":"","fpage":"20","id":"252dc0ce-a2e7-4d50-9652-a9ea74499920","issue":"6","journal":{"abbrevTitle":"JXGCCL","coverImgSrc":"journal/img/cover/JXGCCL.jpg","id":"45","issnPpub":"1000-3738","publisherId":"JXGCCL","title":"机械工程材料"},"keywords":[{"id":"d506f73d-72a4-4a66-8101-778b50ce7d70","keyword":"SS400钢","originalKeyword":"SS400钢"},{"id":"5130d656-d328-4ec7-83e1-0fe90dc28e18","keyword":"变形温度","originalKeyword":"变形温度"},{"id":"10a9494d-4051-4128-999a-92210e4701c9","keyword":"压下量","originalKeyword":"压下量"},{"id":"cf3ff3f7-ac49-4a45-8805-2ad390e70228","keyword":"组织","originalKeyword":"组织"}],"language":"zh","publisherId":"jxgccl201106006","title":"变形温度及压下量对SS400低碳钢显微组织的影响","volume":"35","year":"2011"},{"abstractinfo":"通过现场试验,研究了卷取温度对CSP工艺下冷轧低碳钢板组织和析出的影响.试验结果表明:包钢SPCD热轧板的显微组织均为多边形铁素体和很少的珠光体,随着卷取温度升高,渗碳体析出明显增多,呈白亮条块状的渗碳体沿晶界析出.CSP流程热轧后A1N的析出量不大,但高温卷取时的A1N析出要高于低温卷取的,卷取温度为600℃时,渗碳体级别与A1N的析出均得到很好的控制,同时{111}织构取向分布密度达到最高,从而更有利于提升冷轧深冲带钢的成形性能.","authors":[{"authorName":"程晓杰","id":"72836010-57f1-4af3-9275-94d0242f2632","originalAuthorName":"程晓杰"},{"authorName":"刘雅政","id":"dbbf4d85-319b-426b-bde1-070508e39063","originalAuthorName":"刘雅政"},{"authorName":"周乐育","id":"34a053b5-4aee-4e21-a36b-8120cce745b1","originalAuthorName":"周乐育"},{"authorName":"武磊","id":"dba64531-d7d0-405d-89a4-5761a89a44e8","originalAuthorName":"武磊"},{"authorName":"闫波","id":"a92acf60-5deb-4c11-90b9-7a2c11bfc864","originalAuthorName":"闫波"}],"doi":"","fpage":"53","id":"d468439a-721f-4031-81fd-dd0b7218c36c","issue":"2","journal":{"abbrevTitle":"GT","coverImgSrc":"journal/img/cover/GT.jpg","id":"27","issnPpub":"0449-749X","publisherId":"GT","title":"钢铁"},"keywords":[{"id":"373562dc-67a6-4810-9108-991320ec3504","keyword":"CSP流程","originalKeyword":"CSP流程"},{"id":"7cb11262-7fef-4ba9-872f-8c8836f8fb91","keyword":"组织","originalKeyword":"组织"},{"id":"2124f6d3-1f76-4b3a-bab8-60ab22c36325","keyword":"渗碳体","originalKeyword":"渗碳体"},{"id":"65343a5e-b9fc-4610-bcd2-d267661e11af","keyword":"A1N","originalKeyword":"A1N"},{"id":"aec36cbb-f8fc-4e7c-8272-91844fba0ae2","keyword":"织构","originalKeyword":"织构"}],"language":"zh","publisherId":"gt201102012","title":"卷取温度对CSP工艺下冷轧深冲带钢组织和析出影响","volume":"46","year":"2011"},{"abstractinfo":"将含P高强度Nb-Ti IF钢不同厚度的热轧板料统一轧成0.8mm厚的冷轧板料,来获得不同冷轧压下率的试样,采用盐浴炉退火试验和表面洛氏硬度测定方法,测定了不同冷轧压下率下的50%软化和100%软化的再结晶温度(T50和T100);冷轧试样经800℃退火后,进行单向拉伸试验,测定屈服强度σs、抗拉强度σb、延伸率δ和轧向塑性应变比r0.试验结果表明,冷轧压下率增大,能降低T100,提高δ和r0,但对T50和σs、σb无明显影响.","authors":[{"authorName":"苏琪琦","id":"bd9b2888-6bf9-40a4-b806-06754b0a9a2e","originalAuthorName":"苏琪琦"},{"authorName":"林大为","id":"3eded161-44ca-46ff-a832-8844e657486d","originalAuthorName":"林大为"},{"authorName":"王淼","id":"a3c04d2b-97a4-4b78-9e93-6c6642b979e0","originalAuthorName":"王淼"},{"authorName":"甘青松","id":"4e07cfa9-f739-4169-97f8-fa40b0e93614","originalAuthorName":"甘青松"}],"doi":"10.3969/j.issn.1001-7208.2009.02.013","fpage":"53","id":"3c848b01-de65-4878-972e-8ed58adb7f57","issue":"2","journal":{"abbrevTitle":"SHJS","coverImgSrc":"journal/img/cover/SHJS.jpg","id":"59","issnPpub":"1001-7208","publisherId":"SHJS","title":"上海金属"},"keywords":[{"id":"80c0cd29-f34b-4d73-accf-9b75701094f7","keyword":"高强度IF钢","originalKeyword":"高强度IF钢"},{"id":"e049acde-dd27-4a0c-ad34-75e90ce4104b","keyword":"冷轧压下率","originalKeyword":"冷轧压下率"},{"id":"76fad7aa-6f3e-44a3-b0d6-9ed61bac38aa","keyword":"再结晶温度","originalKeyword":"再结晶温度"},{"id":"221d235d-297a-4fde-91e3-9d3f554361a1","keyword":"力学性能","originalKeyword":"力学性能"}],"language":"zh","publisherId":"shjs200902013","title":"冷轧压下率对高强度IF钢再结晶温度和力学性能的影响","volume":"31","year":"2009"}],"totalpage":7631,"totalrecord":76308}