欢迎登录材料期刊网

材料期刊网

高级检索

为研究不同环境中秸秆/大豆分离蛋白(SPI)改性脲醛树脂复合材料花盆的降解性能,采用土壤掩埋(SB)和户外曝露(OE)2种方式对试样进行降解处理,通过力学性能、质量损失和吸水性测试,热重-红外联用(TG-FTIR),SEM和EDS能谱对花盆的结构和性能进行了研究.结果显示:与对照组(US)相比,经SB和OE降解处理12个月后,花盆的抗拉强度分别下降了36.51%和19.92%,抗拉弹性模量分别下降了9.38%和3.92%,断裂伸长率分别减少了41.36%和36.61%,质量损失率分别为13.74%和4.69%,且试样吸水性均增强.TG-FTIR联用分析表明:降解处理后花盆的热解脱气条件变得温和,最大热解峰延后.SEM扫描观察发现:SB处理后花盆表面腐蚀度及形貌变化大于OE处理后的,两者表面C和N含量均显著下降,表明秸秆/SPI改性脲醛树脂复合材料花盆经SB和OE处理后均发生不同程度降解,SB处理后花盆的降解速率高于OE处理后的.

参考文献

[1] Pan M Z;Zhou D G;Zhou X Y.Improvement of straw surface characteristics via thermo mechanical and chemical treatments[J].Bioresource Technology,2010101(20):7930-7934.
[2] 毕于运;高春雨;王亚静.中国秸秆资源数量估算[J].农业工程学报,200925(12):211-217.
[3] Wang D H;Sun X Z S.Low density particle board from wheat straw and corn pith[J].Industrial Crops and Products,200215(01):43-50.
[4] Talebnia F;Karakashev D;Angelidaki I.Production of bioethanol from wheat straw:An overview on pretreatment,hydrolysis and fermentation[J].Bioresource Technology,2010101(13):4744-4753.
[5] Kaparaju P;Felby C.Characterization of lignin during oxidative and hydrothermal pre treatment processes of wheat straw and corn stover[J].Bioresource Technology,2010101(09):3175-3181.
[6] Venkata S P;Alvin R W;Lgathinathane C.Direct measures of mechanical energy for knife mill size reduction of switchgrass,wheat straw,and corn stover[J].Bioresource Technology,2009100(24):6578-6585.
[7] Binod P;Sindhu R;Singhania R R.Bioethanol production from rice straw:An overview[J].Bioresource Technology,2010101(09):4767-4774.
[8] 黄红英;常志州 .用堆肥腐解秸秆制作植物盆钵的方法:中国,CN1922970A[P].,2007-03-07.
[9] Aamer A S;Faeiha H;Abdul H.Biological degradation of plastics:A comprehensive review[J].Biotechnology Advances,200826(03):246-265.
[10] Mankowski M;Morrell J J.Patterns of fungal attack in wood-plastic composites following exposure in a soil block test[J].Wood and Fiber Science,200032(03):340-345.
[11] Chetanachan W;Sookkho D;Sutthitavil W.PVC/wood:a new look in construction[J].Journal of Vinyl and Additive Technology,20017(03):134-137.
[12] Matuana L M;Kamdem D P;Zhang D J.Photoagjng and stabilization of rigid PVC/wood-fiber composites[J].Journal of Applied Polymer Science,200180(11):1943-1950.
[13] 王伟宏;王清文;张正明.稻壳/聚乙烯复合材的自然老化与紫外光加速老化[J].林业科学,200844(08):90-94.
[14] 孙恩惠;黄红英;常志州.水解大豆分离蛋白改性UF的合成工艺及性能研究[J].中国胶粘剂,201221(11):33-37.
[15] 黄红英;孙恩惠;武国峰.大豆分离蛋白水解物改性三聚氰胺脲醛树脂的合成及表征[J].林产化学与工业,201333(03):85-90.
[16] 孙恩惠;黄红英;武国峰.稻壳粉/改性脲醛树脂模压成型材料的力学性能[J].农业工程学报,201430(13):228-237.
[17] 刘鸿雁;黄建国.缙云山森林群落次生中土壤理化性质的动态变化[J].应用生态学报,200516(11):2041-2046.
[18] Stark N M;Matuana L M.Ultraviolet weathering of photostabilized wood-flour-filled high density polyethylene[J].Journal of Applied Polymer Science,200390(10):2609-2617.
[19] Moe M T;Kin L.Durability of bamboo-glass fiber reinforced polymer matrix hybrid composites[J].Composites Science and Technolygy,200363(3-4):375-387.
[20] Kishore P;Gyaneshwar P T.Interaction of oxidation and damage in high temperature polymeric matrix composites[J].Composites Part A:Applied Science and Manufacuring,200940(12):1931-1940.
[21] 李永玲;吴占松.秸秆热解特性及热解动力学研究[J].热力发电,200837(07):1-5.
[22] 宋春财;胡浩权.秸秆及其主要组分的催化热解及动力学研究[J].煤炭转化,200326(03):91-97.
[23] 王树荣;刘 倩;郑 赟.基于热重红外联用分析的生物质热裂解机理研究[J].工程热物理学报,200627(02):351-353.
[24] 刘倩;王树荣;王凯歌.纤维素热裂解过程中活性纤维素的生成和演变机理[J].物理化学学报,200824(11):1957-1963.
[25] 谭洪;王树荣;骆仲泱.生物质三组分热裂解行为的对比研究[J].燃料化学学报,200634(01):61-65.
[26] 王树荣;刘倩;骆仲泱.基于热重红外联用分析的纤维素热裂解机理研究[J].浙江大学学报(工学版),200640(07):1154-1158.
[27] 姚燕;王树荣;郑 赟.基于热红联用分析的木质素热裂解动力学研究[J].燃烧科学与技术,200713(01):50-54.
[28] Jiang X G;Li C Y;Chi Y.TG-FTIR study on ureaformaldehyde resin residue during pyrolysis and combustion[J].Journal of Hazardous Materials,2010173(1-3):205-210.
[29] Surjit S;Wu C F;Paul T W.Pyrolysis of waste materials using TGA-MS and TGA-FTIR as complementary characterisation techniques[J].Journal of Analytical and Applied Pyrolysis,201294:99-107.
[30] Lkada E.Electron microscope observation of biodegradation of polymers[J].Journal of Environmental Polymer Degradation,19997(04):197-201.
[31] 邹德勋;骆永明;徐凤花.土壤环境中多环芳烃的微生物降解及联合生物修复[J].土壤,200739(03):334-340.
[32] 候人鸾;何春霞;薛 娇.麦秸杆粉/PP木塑复合材料紫外线加速老化性能[J].复合材料学报,201330(05):86-93.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%