采用金相显微镜、测厚仪对铝合金硬质阳极氧化膜和添加n-SiC复合阳极氧化膜的横截面组织、纵截面组织进行分析和研究，采用扫描电镜和X射线能谱仪证实n-SiC进入了氧化膜中，运用磨损试验对复合阳极氧化膜性能进行了性能检测，结果表明，添加n-SiC铝合金复合阳极氧化膜的耐磨性能较好。
Optical microscopy and thickness gauge were used to study the interface structure of cross section and longitudinal section of hard anodic oxidation film and complex anodic oxidation film with n-SiC addition. The results of SEM and EDS show that n-SiC entered into the oxide film. Performance of the complex anodic oxidation film was tested by friction and abrasion testing and salt-fog corrosion testing. The results show that the complex anodic oxidation film with n-SiC addition had better properties.
参考文献
| [1] | 马骏,赵占西,苏冬云.铸铝合金硬质阳极氧化工艺分析及改进[J].表面技术,2006(06):30-31,34. |
| [2] | 马骏,苏冬云.添加n-SiC的铝合金复合阳极氧化工艺[J].腐蚀与防护,2010(11):893-895. |
| [3] | 刘世永,张会臣,高学敏,刘伟,史雅琴.6063铝合金复合硬质阳极氧化及摩擦行为研究[J].轻合金加工技术,2004(04):42-44. |
| [4] | 罗胜联,曾祥勇,旷亚非,曾凌三.铝及其合金电化学复合处理技术及研究进展[J].电镀与精饰,2002(03):22-26. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%