欢迎登录材料期刊网

材料期刊网

高级检索

以电熔镁砂、二氧化硅微粉为原料,采用固相反应法合成镁橄榄石,研究了不同烧结温度及不同配比对合成镁橄榄石材料性能的影响.研究结果表明:以镁橄榄石的理论配比配料合成镁橄榄石,在温度较低时在镁砂表面形成一层镁橄榄石,随着温度的升高,镁橄榄石层变厚,方镁石颗粒被镁橄榄石层包围;烧结温度从1350℃升到1600℃,试样的显气孔率降低,组织结构变得致密,接近镁橄榄石理论配比的试样综合性能较优.

参考文献

[1] 王维邦.耐火材料工艺学[M].北京:冶金工业出版社,2006:151-156.
[2] 刘吉辉,李静,汪琦.铁尾矿合成镁橄榄石质耐火材料的反应机理[J].辽宁科技大学学报,2009(01):1-5,9.
[3] Saberi A;Alinejad B;Negahdari Z et al.A novel method to low temperature synethesis of nanocrystalline foreterite[J].Materials Research Bulletin,2007,42(02):666-673.
[4] Ali Saberi;Zahra Negahdari;Babak Alinejad .Synthesis and characterization of nanocrystalline forsterite through citrate-nitrate route[J].CERAMICS INTERNATIONAL,2009(4):1705-1708.
[5] Ando M;Himura K;Tsunooka T et al.Syntheis of high-quality forsterite[J].Japanese Journal of Applied Physics,2007,46(108):7112-7116.
[6] F. Tavangarian;R. Emadi;A. Shafyei .Influence of mechanical activation and thermal treatment time on nanoparticle forsterite formation mechanism[J].Powder Technology: An International Journal on the Science and Technology of Wet and Dry Particulate Systems,2010(3):412-416.
[7] Fathi M H;Kharaziha M .The effect of fluorine ion on fabrication of nanostructure foreterite during mechanochemical synthesis[J].Journal of Aolloys and Compounds,2009,472(1-2):540-545.
[8] 陆佩文.无机材料科学基础[M].武汉:武汉理工大学出版社,1996:248.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%