汶川大地震后,钢筋的抗震性能受到了广泛的重视,国内多家钢筋生产企业获得了抗震钢筋的生产许可证.概述了微合金化、余热处理和超细晶3种工艺生产的抗震钢筋的研究现状.针对我国钢筋抗震性能指标偏低,有专家提出了应变时效敏感性、低温脆性、可焊性、强度与塑性的配合、高应变低周疲劳性能5个性能指标.还有学者建议将钢筋的耐腐蚀性列入钢筋抗震性能指标.
参考文献
| [1] | 汶川地震[OL].http://baike.baidu.com/view/1587 399.htm |
| [2] | 黄锐,廖卫团.HRB400热轧带肋钢筋的性能分析[J].南方金属,2003(01):37-40,51. |
| [3] | 孙决定,丁世学.我国400 MPa Ⅲ级钢筋的生产与应用[J].武钢技术,2005(04):27-31. |
| [4] | 张越峰,霍晓莉.应力集中对余热处理钢筋冷、反弯裂纹影响研究[J].轧钢,1999(05):17-19. |
| [5] | 简红勇.微合金化在我国的应用与发展[J].冶金丛刊,2004(03):38-42. |
| [6] | GB1499.2-2007.GB1499.2-2007,钢筋混凝土用钢[S].北京:中国标准出版社,2008. |
| [7] | 龚士弘;盛光敏 .震区用钢知识问答[N].中国冶金报,2002-01-23. |
| [8] | 龚士弘.抗震设计用钢探讨[J].工程抗震,1995(03):37. |
| [9] | 辛义德.建筑结构用钢的抗震性能及其提高途径[J].重庆大学学报,1986(02):9. |
| [10] | Apostolopoulos C A et al.Tensile and low fatigue behavior of corroded reinforcing steel bars S400[J].Construction and Building Materials,2007,21:855. |
| [11] | Apostolopoulos Ch Alk .Mechanical behavior of corroded reinforcing steel bars S500s tempcore under low cycle fatigue[J].Construction and Building Materials,2007,21:1447. |
| [12] | 齐俊杰.微合金钢[M].北京:冶金丁业出版社,2006 |
| [13] | 东涛,付俊岩.试论我国钢的微合金化发展方向[J].中国冶金,2002(05):16-19. |
| [14] | 盛光敏;龚士弘 .关于地震设防区建筑结构用钢的几点意见[J].自然灾害学报,1995,4(01):51. |
| [15] | Sheng G M;Gong S H .Investigation of low cycle fatigue behaviors of building structural steels under earthquake loading[J].Acta Metallurgica,1997,10:51. |
| [16] | 龚士弘;盛光敏 .高抗震建筑结构钢及其生产工艺[P].中国,CN1105395,1995-07-19. |
| [17] | 秦斌,盛光敏,龚士弘.HRB400抗震钢筋的综合性能[J].钢铁研究学报,2006(05):33-37. |
| [18] | 秦斌,盛光敏,龚士弘.20MnSiV Ⅲ级钢筋焊缝和热影响区拉伸脆性断裂的分析[J].特殊钢,2003(06):59-61. |
| [19] | 廖洪军,盛光敏,龚士弘,蒋斌.HRB400Ⅲ钢筋抗震性能研究[J].钢铁钒钛,2005(04):12-16. |
| [20] | 廖洪军.20MnSiV抗震钢筋的性能及钒的析出分析[J].上海钢研,2006(04):52. |
| [21] | 蒋莉萍,盛光敏,刘旭东,龚士弘,杨茂麟,刘永林,王丽娟,魏福龙,孙城.HRB400钢筋中析出物的观察[J].材料导报,2007(z2):482-483,486. |
| [22] | 秦斌,盛光敏,龚士弘.HRB400抗震钢筋韧脆转变温度测试分析[J].钢铁钒钛,2003(04):59-63. |
| [23] | 吴比,盛光敏,龚士弘,秦斌.钒对HRB400钢筋应变时效及冲击性能的影响[J].钢铁研究,2004(03):10-12,21. |
| [24] | 龚士弘,盛光敏.地震区建筑用钢的韧性对建筑物抗震性能的影响[J].工程抗震,2004(03):41-47. |
| [25] | 龚士弘,盛光敏.地震区建筑用钢的可焊性问题[J].工程抗震与加固改造,2005(02):76-80. |
| [26] | 王青江;王仪康 .微合金控制轧制钢[J].焊管,1994,17(04):14. |
| [27] | 姚连登.微合金化与控制轧制的进展[J].宽厚板,1999(05):1. |
| [28] | Adem Bakkaloglu .Effect of processing parameters on the microstructure and properties of an Nb microalloyed steel[J].Materials Letters,2002(3):200-209. |
| [29] | 何天禄.余热淬火-热芯回火工艺[J].天津冶金,2002(06):14. |
| [30] | 王伟,尚成嘉.大规格高强度钢筋轧后余热处理工艺探讨[J].山东冶金,2005(05):38-40. |
| [31] | 赵双庭;何云雪.用轧后余热处理工艺生产不同强度级别螺纹钢筋的生产实践[J].天津冶金,2002(增刊8):7. |
| [32] | 刘宏玉,刘洪涌,吴迪.φ40 mm英标460 MPa级余热处理钢筋的几个问题探讨[J].钢铁,2000(12):30. |
| [33] | 王纯,郭兵.460MPa级轧后余热处理钢筋[J].冶金设备,2001(05):9-12. |
| [34] | 李炳德 等.K8轧后余热处理钢筋试验与生产[J].江西冶金,1991,11(1-2):33. |
| [35] | 白玉光,刘春明,任海鹏,张晓刚.高强度精轧螺纹钢筋的组织与性能[J].东北大学学报(自然科学版),2003(03):268-271. |
| [36] | 周广武.轧后余热处理生产加标400W钢筋实践[J].河南冶金,2007(z1):14-16. |
| [37] | 完卫国,杨仁江.英标460MPa级钢筋余热处理工艺研究[J].山东冶金,2005(05):35-38. |
| [38] | 王瑞珍,杨忠民,车彦民,陈其安,马燕文,陈颖.低碳钢热轧钢筋再结晶控制轧制与控制冷却实现晶粒细化[J].钢铁,2004(02):47-50. |
| [39] | 王勤;程浩.钢的含碳量对轧后余热处理钢材性能的影响[J].南方钢铁,1995(05):3. |
| [40] | 余伟,陈银莉,蔡庆伍.余热处理20MnSi带肋钢筋力学性能的模拟研究[J].特殊钢,2002(03):13-15. |
| [41] | Cetinal H et al.Artificial neural networks modeling of mechanical property and microstructure evolution in the Tempcore process[J].Computers Sructures,2002,80:213. |
| [42] | John Nikolaou;George D. Papadimitriou .Impact toughness of reinforcing steels produced by (ⅰ) the Tempcore process and (ⅱ) microalloying with vanadium[J].International journal of impact engineering,2005(8):1065-1080. |
| [43] | 仝丽珍,蒋海涛,赵修领.英标460BΦ50 mm钢筋混凝土用钢筋的开发[J].山东冶金,2008(01):31-33. |
| [44] | 姜丰达,苍大强,宗燕兵.螺纹钢控冷轧制的组织结构与性能研究[C].冶金研究（第五届冶金工程科学论坛：论文专辑）,2006:221-223. |
| [45] | 刘相华,杜林秀,王国栋.热轧钢材的晶粒细化与超级钢开发[J].河南冶金,2004(03):3-6,17. |
| [46] | 翁宇庆.超细晶钢--钢的组织细化理论与控制技术[M].北京:冶金工业出版社,2003 |
| [47] | 翁宇庆.超细晶钢理论及技术进展[J].钢铁,2005(03):1-8. |
| [48] | 汪建敏,陆晋,姜银方,周孔亢,潘励.基于温变形的超细晶中碳钢制备工艺[J].农业机械学报,2008(03):207-211. |
| [49] | Wang TS;Zhang FC;Zhang M;Lv B .A novel process to obtain ultrafine-grained low carbon steel with bimodal grain size distribution for potentially improving ductility[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):456-460. |
| [50] | Yoshitaka Okitsu;Naoki Takata;Nobuhiro Tsuji .A new route to fabricate ultrafine-grained structures in carbon steels without severe plastic deformation[J].Scripta materialia,2009(2):76-79. |
| [51] | 孙建林.800MPa级低合金中厚板的工艺及力学性能分析[A].北京:中国金属学会,2001:345. |
| [52] | 林清华 .C-Mn超细晶钢控轧控冷工艺的研究[D].昆明理工大学,2003. |
| [53] | 杨忠民,赵燕,王瑞珍,陈其安,车彦民,齐长发,杜明山.普通碳素钢超细晶临界奥氏体控轧工艺研究[J].钢铁,2001(08):43-47. |
| [54] | 王国栋.以超快速冷却为核心的新一代TMCP技术[J].上海金属,2008(02):1-5. |
| [55] | 张海,仝金平,梁云彩,张恩民,杨帆.超细晶螺纹钢生产线改造及工艺实践[J].钢铁,2007(11):48-52. |
| [56] | KYUNG-TAE PARK;YONG-SEOG KIM;DONG HYUK SHIN .Microstructural Stability of Ultrafine Grained Low-Carbon Steel Containing Vanadium Fabricated by Intense Plastic Straining[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2001(9):2373-2381. |
| [57] | 赵志华,杜林秀,胡燕慧,刘相华,王国栋,孙建伦.400MPa级超细晶粒钢的力学性能[J].机械工程材料,2004(10):35-37,40. |
| [58] | 田玉伟;苏崇涛 .SS400超细晶钢力学性能的研究[J].钢铁,2006,41(增刊2):414. |
| [59] | 何长红,彭云,田志凌,杨忠民.400 MPa级超细晶粒热轧带肋钢筋焊接接头的组织和性能[J].钢铁研究学报,2004(06):56-60. |
| [60] | 侯振波,史耀武,李晓延,田志凌,何长红.超细晶粒钢筋焊接接头的疲劳强度[J].钢铁研究学报,2007(02):43-46. |
| [61] | 侯振波,史耀武,田志凌.SS400超细晶粒钢及其焊接接头的疲劳裂纹扩展速率[J].钢铁研究学报,2004(02):47-49. |
| [62] | Qiu Hai et al.Role of grain size on the strength and ductilebrittle transition temperature in the dual-sized ferrite region of the heat-affected zone of ultra-fine grained steel[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2006,435-436:648. |
| [63] | 王建国,杨胜利,王红缨,康永林.800 MPa级低合金高强度钢低周疲劳性能[J].北京科技大学学报,2005(01):75-78. |
| [64] | Furuya Y et al.Effencts of carbon and phosphorus addition on the fatigue properties of uhrafine-grained steels[J].Scripta Materialia,2005,52:1163. |
| [65] | Futuya Y et al.Fatigue strength of uhrafine ferrite-cementite steels and effects of strenthening mechanisms[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2007,38A:2984. |
| [66] | Chapetti M D et al.Fatigue strength of ultra-fine grained steels[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,381:331. |
| [67] | Chapetti M D et al.Fatigue crack propagation behavior in ultra-fine grained low carbon steel[J].International Journal of Fatigue,2005,27:235. |
| [68] | Kim Ho-Kyung et al.Fatigue properties of uhrafine grained low carbon steel produced by equal channel angular pressing[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2003,340:243. |
| [69] | Okayasu M et al.Fatigue properties of ultra-fine grained dual phase ferrite/martensite low carbon steel[J].International Journal of Fatigue,2008,30:1358. |
| [70] | Zitrou E et al.Atmospheric corrosion of steel reinforcing bars produced by various manufacturing processes[J].Construction and Building Materials,2007,21:1161. |
| [71] | Gonzalez J J et al.Failure of reinforcing concrete steel ribbed bars[J].ENGINEERING FAILURE ANALYSIS,2006,13:1376. |
| [72] | Emilio Bastidas-Arteaga;Philippe Bressolette;Alaa Chateauneuf;Mauricio Sanchez-Silva .Probabilistic Lifetime Assessment Of Rc Structures Under Coupled Corrosion-fatigue Deterioration Processes[J].Structural Safety,2009(1):84-96. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%