用层内及层间混杂方式制备了超高相对分子质量聚乙烯(UHMWPE)纤维/碳纤维混杂复合材料,对复合材料的力学性能、动态力学性能(DMA)及微观形貌(SEM)进行了分析比较.结果表明,层内混杂复合材料的综合性能好于层间混杂复合材料,层内混杂复合材料的冲击强度在UHMWPE纤维相对于碳纤维质量分数为43%时有最大值423.3kJ/m2,层内混杂复合材料的贮能模量(E')、损耗因子(tanδ)和损耗模量(E')明显地向高温方向移动,混杂复合材料的玻璃化温度(Tg)及模量分别比UHMWPE复合材料提高了2倍和3倍.
参考文献
[1] | Abdel-Bary M;El-Nesr E M;El-Nesr F M .Radiation-induced grafted UHMWPE-PE chopped fibres as reinforcing filler in polychloroprene[J].Polymers For Advanced Technologies,1997,8:587. |
[2] | Ogawa T;Mukai H;Osawa S .Improvement of the mechanical properties of an ultrahigh molecular weight polyethylene fibre.epoxy composite by corona-discharge treatment[J].Journal of Applied Polymer Science,2001,79:1162. |
[3] | Devaux E;Caze C .Composites of ultra-high molecular weight polyethylene matrix Ⅱ.fiber/matrix adherion[J].Journal of Computer Science and Technology,1999,59(06):879. |
[4] | 吕生华,梁国正,何洋,王结良.超高相对分子质量聚乙烯纤维研究进展[J].化工新型材料,2002(08):13-16. |
[5] | 张佐光,仲伟虹,张大兴,史卫华.不等径纤维混杂复合材料混杂原理[J].北京航空航天大学学报,1999(05):499-501. |
[6] | Dutra R.C.L. .Hybrid composites based on polypropylene and carbon fiber and epoxy matrix[J].Polymer: The International Journal for the Science and Technology of Polymers,2000(10):3841-3849. |
[7] | Li Y;Xian X J;Choy C L .Compressive and flexural bebavior of ultrahigh modulus polyethylene fiber and carbon fiber hybrid composites[J].Journal of Computer Science and Technology,1999,59(01):13. |
[8] | Ackley M;Gao P .Surface treatment of ultrahigh molecular weight polyethylene to enhance adhesion and conductivity propertyes[J].POLYMER,1992,33:19. |
[9] | 何洋,梁国正,杨洁颖,王结良,吕生华,陈成泗,陈孟群.超高分子量聚乙烯纤维/碳纤维混杂复合材料研究[J].航空学报,2004(05):504-507. |
[10] | 许泽,陈业标,魏曾苏.复合材料夹层结构的弯扭稳定性[J].航空学报,1994(02):222. |
[11] | Akay M .Aspects of dynamic mechanical analysis in polymeric composites[J].Journal of Computer Science and Technology,1993,47:419. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%