Fe-6.5wt%Si composite compact was fabricated by spark plasma sintering(SPS).Mechanical alloying(MA)was used to prepare Fe-Si composite powders.The composite powders were sintered by SPS at elevsated temperature from 500℃ to 700℃.The experimental results indicate that the non-equilibrium state of composite Fe-Si is preserved in the compact.The density of the bulk rises with the increasing temperature and there is no diffusion of silicon and iron in the interface.
参考文献
[1] | G E Fish;C F Chang;R Bye .Frequency Dependence of Core Loss in Rapidly Quenched Fe-65wt%Si[J].Journal of Applied Physics,1988,64(10):5370-5372. |
[2] | Y Tanaka;Y Takada;M Abe;S Masuda .Magnetic Properties of 65%Si-Fe Sheet and Its Applications[J].Journal of Magnetism and Magnetic Materials,1990,83:375-376. |
[3] | Kenji Narita;Masato Enokizono .Effect of Nickel and Manganese Addition on Ductility and Magnetic Properties of 65% Silicon-Iron Alloy[J].IEEE Transactions on Magnetics,1978,14(04):258-262. |
[4] | N. Stevulova;A. Buchal .Structural investigation of the high-energy milled Fe-Si system[J].Journal of Magnetism and Magnetic Materials,1999(0):190-192. |
[5] | Roberto Martinez Sanchez;Francisco Espinosa Magana;Alberto Duarte Moller;Jose Gerardo Cabanas Moreno;David Rios Jara;Yoshito Nishikawa;Sebastian Diaz De La Torre .Metastability of mechanically alloyed and spark plasma sintered Co{sub}50Ti{sub}50 powder[J].粉体および粉末冶金,2000(5):480-483. |
[6] | 张东明,傅正义.放电等离子加压烧结(SPS)技术特点及应用[J].武汉工业大学学报,1999(06):15-17. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%