材料期刊网

1.国防科技大学航天与材料工程学院,长沙,410073

2.国防科技大学航天与材料工程学院,长沙,410073

{"currentpage":1,"firstResult":0,"maxresult":10,"pagecode":5,"pageindex":{"endPagecode":5,"startPagecode":1},"records":[{"abstractinfo":"镍基高温合金GH4169热模拟压缩实验结果表明:变形温度的升高和应变速率的减小使该合金高温变形时的峰值应力和稳态应力显著降低,变形温度会影响其进入稳态变形时变形程度的大小.基于高温合金GH4169高温变形时的流动应力特征,运用模糊神经网络理论建立了该合金高温变形时的流动应力模型.计算与实验的流动应力的最大误差为10.18%,平均误差为2.11%,该模型的计算精度明显高于由回归法建立的高温合金GH4169高温变形时的流动应力模型.","authors":[{"authorName":"李淼泉","id":"ea954f44-0fcd-4622-9a74-65b946cd42d2","originalAuthorName":"李淼泉"},{"authorName":"姚晓燕","id":"3b893cba-2478-4ad5-b3d2-52d798ccf0fc","originalAuthorName":"姚晓燕"},{"authorName":"罗皎","id":"0c19c1dc-7815-466e-8798-fe684c7ae88c","originalAuthorName":"罗皎"},{"authorName":"林莺莺","id":"ff3a8ced-f672-47ba-8191-6a861db21ecc","originalAuthorName":"林莺莺"},{"authorName":"苏少博","id":"f8c4ef96-5241-4734-b3ed-f03004ded4cf","originalAuthorName":"苏少博"},{"authorName":"王海荣","id":"9bc6578d-fbde-4b17-82ba-650f82ec4fc8","originalAuthorName":"王海荣"}],"doi":"10.3321/j.issn:0412-1961.2007.09.008","fpage":"937","id":"1d29177b-bf60-4543-9540-94fd1154839e","issue":"9","journal":{"abbrevTitle":"JSXB","coverImgSrc":"journal/img/cover/JSXB.jpg","id":"48","issnPpub":"0412-1961","publisherId":"JSXB","title":"金属学报"},"keywords":[{"id":"4c9d8ff3-bbce-4bab-becb-5963fac83d99","keyword":"镍基高温合金","originalKeyword":"镍基高温合金"},{"id":"f6eec2f8-4ecb-4125-a91d-a500ab74b676","keyword":"热模拟压缩","originalKeyword":"热模拟压缩"},{"id":"41bd40b5-8483-4130-835d-ad4abd4c4152","keyword":"流动应力","originalKeyword":"流动应力"},{"id":"25363f11-9b6d-4067-8e7a-a313bb5e5b8c","keyword":"模糊神经网络","originalKeyword":"模糊神经网络"},{"id":"538dd1ee-5bef-4ace-a223-bd5c92262214","keyword":"流动应力模型","originalKeyword":"流动应力模型"}],"language":"zh","publisherId":"jsxb200709008","title":"镍基高温合金GH4169高温变形流动应力模型研究","volume":"43","year":"2007"},{"abstractinfo":"苏钢4号高炉运用现代化管理方法,全面贯彻高炉安全、稳定、顺行、均衡、长寿、高产、优质、低耗的工作方针和操作方针及有关长寿技术措施,炉龄达10年10个月,产铁8 385 t/m3,创全国小高炉长寿高效先进水平.","authors":[{"authorName":"孙廉洁","id":"af677360-e9d3-4318-8b93-ebb85e2d1778","originalAuthorName":"孙廉洁"}],"doi":"","fpage":"9","id":"1fd7501b-b893-4f48-94b6-1e660af95d49","issue":"11","journal":{"abbrevTitle":"GT","coverImgSrc":"journal/img/cover/GT.jpg","id":"27","issnPpub":"0449-749X","publisherId":"GT","title":"钢铁"},"keywords":[{"id":"efac719a-18cd-4612-90ae-306b1ca1949c","keyword":"高炉","originalKeyword":"高炉"},{"id":"74e10e82-2f5a-40fb-bb93-ebca1035ba47","keyword":"长寿","originalKeyword":"长寿"},{"id":"6dff3854-c4c0-4b31-9ca1-3009d54459d5","keyword":"管理","originalKeyword":"管理"},{"id":"f14330f0-9df2-4629-b6ae-d7ca243b60eb","keyword":"操作","originalKeyword":"操作"}],"language":"zh","publisherId":"gt199811003","title":"苏钢4号高炉的长寿实践","volume":"33","year":"1998"},{"abstractinfo":"通过对白云鄂博矿中稀土赋存情况的分析,选取随铁开采的稀土作为主要研究对象,通过对粒度、药剂作用以及温度、浓度、pH值等因素对稀土选别的影响,总体分析白云鄂博矿稀土的分选特性,并以此为基础对白云鄂博矿的稀土选别工艺与因素控制提出科学的见解.最终确定,粒度20 μm～ 50 μm、温度不低于60℃、粗选浓度55％ ～65％时,白云鄂博矿稀土浮选作业条件最好.","authors":[{"authorName":"陈宏超","id":"98ea382e-dd87-416a-84fd-c063a3f27baf","originalAuthorName":"陈宏超"}],"doi":"","fpage":"78","id":"cef2dead-9654-462b-8f36-964b77439f45","issue":"4","journal":{"abbrevTitle":"XT","coverImgSrc":"journal/img/cover/XT.jpg","id":"65","issnPpub":"1004-0277","publisherId":"XT","title":"稀土"},"keywords":[{"id":"0df43db5-1bc0-4d7f-87bc-d1a3c0e53a4d","keyword":"白云鄂博矿","originalKeyword":"白云鄂博矿"},{"id":"0507ed0e-f5d9-493e-952c-5612594b5a44","keyword":"稀土","originalKeyword":"稀土"},{"id":"094e7107-b399-44a3-80a2-c2242df6446d","keyword":"因素","originalKeyword":"因素"},{"id":"0e83e9e5-f416-47bd-9aa9-494af550eb35","keyword":"选别","originalKeyword":"选别"}],"language":"zh","publisherId":"xitu201404015","title":"白云鄂博矿稀土选别研究","volume":"35","year":"2014"},{"abstractinfo":"全面介绍了新发展的少无莱氏体高合金工具钢(少无莱氏体高速钢及少无莱氏体高合金冷作模具钢)及其热处理。","authors":[{"authorName":"戚正风","id":"970f7e08-398b-48a3-9283-c1893a17afa8","originalAuthorName":"戚正风"},{"authorName":"王传雅","id":"2784f25e-eed2-4a99-b95c-a8eb3ed1504e","originalAuthorName":"王传雅"}],"doi":"10.3969/j.issn.1009-6264.2001.01.007","fpage":"31","id":"19eab20c-20c5-4d80-812d-4c046bae65ad","issue":"1","journal":{"abbrevTitle":"CLRCLXB","coverImgSrc":"journal/img/cover/CLRCLXB.jpg","id":"15","issnPpub":"1009-6264","publisherId":"CLRCLXB","title":"材料热处理学报"},"keywords":[{"id":"7a5aca84-085c-44b1-8685-168002bd98f0","keyword":"高速钢","originalKeyword":"高速钢"},{"id":"e96dabd3-66ed-4e50-aaf7-2ce61a10ca37","keyword":"冷作模具钢","originalKeyword":"冷作模具钢"},{"id":"3e34bed0-4caf-4305-98bd-de0454dbab70","keyword":"莱氏体钢","originalKeyword":"莱氏体钢"},{"id":"7bfefd4d-19da-42da-b34d-bbf93222a10f","keyword":"超饱和渗碳","originalKeyword":"超饱和渗碳"}],"language":"zh","publisherId":"jsrclxb200101007","title":"少无莱氏体高合金工具钢","volume":"22","year":"2001"},{"abstractinfo":"采用气相色谱-质谱联用对冠心苏合丸及药材中的挥发性成分进行了分析.采用选择离子监测法,以水杨酸甲酯为内标,对冠心苏合丸中的两个指标成分冰片和苯甲酸苄酯进行了定量测定.冰片和苯甲酸苄酯的平均加标回收率分别为91.7%和89.7%,RSD分别为5.6%和2.3%.","authors":[{"authorName":"孙秀燕","id":"737e65eb-fad8-4b91-9ae8-69d3f3e19187","originalAuthorName":"孙秀燕"},{"authorName":"吴建兵","id":"ea0918d9-8a52-460a-85eb-0c0fdf3276ff","originalAuthorName":"吴建兵"},{"authorName":"王素娟","id":"54790346-f072-4b24-95c2-f74b198e70a6","originalAuthorName":"王素娟"}],"doi":"10.3321/j.issn:1000-8713.2002.04.025","fpage":"378","id":"e7e6630d-ff00-4857-97c6-f6d6a3dbff7e","issue":"4","journal":{"abbrevTitle":"SP","coverImgSrc":"journal/img/cover/SP.jpg","id":"58","issnPpub":"1000-8713","publisherId":"SP","title":"色谱 "},"keywords":[{"id":"84da69f1-04d8-4efe-8a80-e96d17bf0957","keyword":"气相色谱-质谱","originalKeyword":"气相色谱-质谱"},{"id":"0e884b2e-8888-4442-96e6-0c7589c82af7","keyword":"挥发性组分","originalKeyword":"挥发性组分"},{"id":"3224a2f8-fdcb-4ee8-be66-6b4c54226330","keyword":"冰片","originalKeyword":"冰片"},{"id":"e1d06d5c-df6c-44fa-b699-a76071ffe9de","keyword":"苯甲酸苄酯","originalKeyword":"苯甲酸苄酯"},{"id":"e7e61cb8-e4bc-41df-b841-618c443c9d45","keyword":"冠心苏合丸","originalKeyword":"冠心苏合丸"}],"language":"zh","publisherId":"sp200204025","title":"气相色谱-质谱联用分析冠心苏合丸中的挥发性组分","volume":"20","year":"2002"},{"abstractinfo":"土壤的干湿变化直接影响到土壤中金属材料的腐蚀.为此,应用失重法研究了土壤湿度对Q235钢在苏里格大气田土壤中腐蚀行为的影响,结合电镜、能谱等手段对腐蚀产物进行表征,并对腐蚀机理进行了初步探讨.结果表明:土壤湿度对Q235钢的腐蚀影响很严重,在湿度为10%时,出现最大腐蚀速率.腐蚀形貌观察发现Q235钢点腐蚀倾向较为严重;钢的腐蚀产物主要是铁的氧化物(Fe2O3,Fe3O4).","authors":[{"authorName":"王晶","id":"55fe8b7b-f3bd-40d1-bbb0-03f68446bbe6","originalAuthorName":"王晶"},{"authorName":"宋义全","id":"8ee8e38a-fd34-4e5a-83f9-c9521df2ed70","originalAuthorName":"宋义全"},{"authorName":"冯佃臣","id":"b4a307b9-86ff-4568-8599-848a17e5c760","originalAuthorName":"冯佃臣"},{"authorName":"李涛","id":"484dffb6-9aa7-46be-ade9-c6e371f55462","originalAuthorName":"李涛"},{"authorName":"李晓刚","id":"26db254e-72e7-47d8-9640-22058f1e80c7","originalAuthorName":"李晓刚"}],"doi":"","fpage":"69","id":"0284bae2-e13c-40ec-bec4-0380ce506b5f","issue":"2","journal":{"abbrevTitle":"CLBH","coverImgSrc":"journal/img/cover/CLBH.jpg","id":"7","issnPpub":"1001-1560","publisherId":"CLBH","title":"材料保护"},"keywords":[{"id":"6c612e6e-cbdd-43b6-a1ae-26b92683ed0d","keyword":"土壤湿度","originalKeyword":"土壤湿度"},{"id":"99a24818-1f0e-4d40-8d92-fd94e0180a5d","keyword":"Q235钢","originalKeyword":"Q235钢"},{"id":"a4e017c2-5eb0-42cd-8b4f-37e978ff1eb1","keyword":"腐蚀行为","originalKeyword":"腐蚀行为"},{"id":"03485fd4-d80d-4eb6-bfd1-a221de8e3e7e","keyword":"点腐蚀","originalKeyword":"点腐蚀"},{"id":"9229a833-807d-4883-9125-540fc20a53c2","keyword":"腐蚀机理","originalKeyword":"腐蚀机理"}],"language":"zh","publisherId":"clbh200902022","title":"苏里格大气田土壤湿度对Q235钢腐蚀行为的影响","volume":"42","year":"2009"},{"abstractinfo":"在新疆苏吉泉花岗岩所含团块状石墨中发现许多纳米级锥状矿物,经高分辨电镜能谱分析其化学成份为碳,电子衍射和高分辨分辨像分析表明其为纳米石墨锥.锥的顶角一般在15.5o～36.0o之间.在高分辨电镜观察基础上,讨论了纳米石墨锥的形成机制.根据三元长石温度计计算,纳米石墨锥的形成温度分别为480～950℃,压力为511～878MPa.","authors":[{"authorName":"冯有利","id":"e1d7eb97-d09f-4301-b9c6-d3c1ec79bd10","originalAuthorName":"冯有利"},{"authorName":"于立竟","id":"65e1178e-a02c-49fa-8f4e-c2825e8150e6","originalAuthorName":"于立竟"}],"doi":"10.3969/j.issn.1001-1625.2007.01.003","fpage":"9","id":"33fa1660-5743-4eb8-acce-9725883c51d2","issue":"1","journal":{"abbrevTitle":"GSYTB","coverImgSrc":"journal/img/cover/GSYTB.jpg","id":"36","issnPpub":"1001-1625","publisherId":"GSYTB","title":"硅酸盐通报 "},"keywords":[{"id":"8fbef0d0-074f-4546-99f0-0730042de398","keyword":"纳米石墨锥","originalKeyword":"纳米石墨锥"},{"id":"acfa7822-07cd-4a77-89e1-fe73fc7cfaf2","keyword":"高分辨电子显微镜(HRTEM)","originalKeyword":"高分辨电子显微镜(HRTEM)"},{"id":"9976341b-7aa0-4514-9b22-e3fcc555ae37","keyword":"形成机制","originalKeyword":"形成机制"}],"language":"zh","publisherId":"gsytb200701003","title":"新疆苏吉泉石墨矿床中的纳米石墨锥的结构表征","volume":"26","year":"2007"},{"abstractinfo":"卡特巴阿苏特大型金铜矿床位于新疆西天山那拉提北缘断裂的南侧,紧邻那拉提北缘断裂.对矿区构造地质特征进行了详细研究,对构造与成矿作用的关系进行了分析.研究结果表明,矿体主要分布于F5、F6断层之间的断层-破碎带节理构造系统中,显示出典型的构造控矿特征.通过对矿区构造与区域构造关系的探讨,认为矿区构造系统为与区域性那拉提北缘断裂的次级平行构造,因此该矿区构造体系为与区域性构造平行的一套断层破碎带-节理构造系统.","authors":[{"authorName":"李云涛","id":"66b6874a-0a90-4fce-8adc-5229c894b660","originalAuthorName":"李云涛"},{"authorName":"刘云华","id":"80caa4cb-4485-4c1d-a794-1040677feaee","originalAuthorName":"刘云华"},{"authorName":"李真","id":"fdabbf3c-6912-47d4-879a-189a326475b2","originalAuthorName":"李真"},{"authorName":"韩一筱","id":"a09b1979-0b41-4733-97f4-0ff41e4c8b5b","originalAuthorName":"韩一筱"},{"authorName":"李欢","id":"0e8ccf88-23ac-45f4-a8d2-308cfb643523","originalAuthorName":"李欢"},{"authorName":"周赛芳","id":"73cb0446-bf6c-4cb1-909e-9be3db249174","originalAuthorName":"周赛芳"}],"doi":"10.11792/hj20160403","fpage":"7","id":"85c1d814-4883-41f4-bd7a-71ff0c378af4","issue":"4","journal":{"abbrevTitle":"HJ","coverImgSrc":"journal/img/cover/HJ.jpg","id":"44","issnPpub":"1001-1277","publisherId":"HJ","title":"黄金"},"keywords":[{"id":"4950e61c-ed14-443e-8bc0-6eb1d50e8a50","keyword":"控矿构造","originalKeyword":"控矿构造"},{"id":"50a401b3-c03a-4a49-b68f-2c60d46fee42","keyword":"构造特征","originalKeyword":"构造特征"},{"id":"33472702-53b1-420d-9a43-dc22fd6a2d2a","keyword":"构造系统","originalKeyword":"构造系统"},{"id":"f9e61186-e017-4afe-87bf-4bdb5cc41596","keyword":"卡特巴阿苏金铜矿床","originalKeyword":"卡特巴阿苏金铜矿床"},{"id":"3e6f53cb-c5ef-4599-917c-91fc00bb65a5","keyword":"新疆西天山","originalKeyword":"新疆西天山"}],"language":"zh","publisherId":"huangj201604003","title":"新疆西天山卡特巴阿苏金铜矿区构造特征研究","volume":"37","year":"2016"},{"abstractinfo":"研制了不饱和聚酯亚胺体系的少胶粉云母带,由它制成的线棒155℃tgδ常态tgδ、△tgδ均达到优等品水平,常态电老化中值寿命为918h,热态电老化中值寿命为1098h.该少胶粉云母带在国内外未见报道.","authors":[{"authorName":"王丽萍","id":"1a181205-f295-4966-b766-da4b6fcf17fb","originalAuthorName":"王丽萍"},{"authorName":"李健","id":"d2fe4825-1cfb-4bba-9819-727af3f1c89c","originalAuthorName":"李健"},{"authorName":"张丽宇","id":"ef49089e-18f4-4f89-8d5e-7c7b9a59f04d","originalAuthorName":"张丽宇"},{"authorName":"杨晓彬","id":"f84699a4-16f9-4941-a30c-2d6acbdd1587","originalAuthorName":"杨晓彬"}],"doi":"","fpage":"1107","id":"19753456-43b6-4751-9d47-177adea65df9","issue":"z1","journal":{"abbrevTitle":"GNCL","coverImgSrc":"journal/img/cover/GNCL.jpg","id":"33","issnPpub":"1001-9731","publisherId":"GNCL","title":"功能材料"},"keywords":[{"id":"8d86eb54-2124-4935-a5b8-2709d9ed7ac6","keyword":"不饱和聚酯亚胺","originalKeyword":"不饱和聚酯亚胺"},{"id":"66f90a38-35bb-4f10-af78-1d5231441cd5","keyword":"少胶粉云母带","originalKeyword":"少胶粉云母带"},{"id":"65d27721-5a1e-4a3e-bf40-f02ebaef9cd2","keyword":"VPI绝缘","originalKeyword":"VPI绝缘"}],"language":"zh","publisherId":"gncl2004z1309","title":"不饱和聚酯亚胺少胶粉云母带","volume":"35","year":"2004"},{"abstractinfo":"在不同的工艺条件下能生产出晶型型貌不同的少钕碳酸稀土.在适宜条件下可以生产出氯根含量较低、晶型晶貌为珠菊状的少钕碳酸稀土,可满足客户要求.","authors":[{"authorName":"范明洋","id":"66f8a6bd-e09e-4f07-a126-cd598cefd520","originalAuthorName":"范明洋"},{"authorName":"郝先库","id":"34637085-f8a0-48ea-bfa6-b29f365fb23c","originalAuthorName":"郝先库"},{"authorName":"申俊峰","id":"962b4eff-27f1-44d2-9c42-70ac2170d30a","originalAuthorName":"申俊峰"}],"doi":"10.3969/j.issn.1004-0277.1999.05.001","fpage":"1","id":"1a641fa0-3659-4b2d-b5c6-b285a794136d","issue":"5","journal":{"abbrevTitle":"XT","coverImgSrc":"journal/img/cover/XT.jpg","id":"65","issnPpub":"1004-0277","publisherId":"XT","title":"稀土"},"keywords":[{"id":"8c4c2ca2-f9df-4693-9489-67e78779b7ba","keyword":"少钕碳酸稀土","originalKeyword":"少钕碳酸稀土"},{"id":"f7a6e40c-669b-4b59-9920-0067f4917d00","keyword":"晶型","originalKeyword":"晶型"},{"id":"9c978d93-589e-4e5b-b187-db5e7984f984","keyword":"型貌","originalKeyword":"型貌"},{"id":"f51cf240-47e8-482c-a3f1-643d0247834b","keyword":"氯根","originalKeyword":"氯根"}],"language":"zh","publisherId":"xitu199905001","title":"低氯根晶型少钕碳酸稀土研究","volume":"20","year":"1999"}],"totalpage":133,"totalrecord":1329}