为探讨单相流量计用于液液两相流参数测量的可行性和有效性,本文对文丘里管、涡轮流量计和椭圆齿轮流量计用于油水两相流测量的响应特性进行了实验研究.文丘里管和涡轮流量计的实验管径为15 mm,25 mm,40 mm,椭圆齿轮流量计的实验管径为25 mm和40 mm.油水两相流总体积流量范围为1～5 m3/h,油含率范围为15%～85%.实验结果表明,文丘里管在高油含率时测得的油水两相流流量比实际流量偏大4%～5%.涡轮流量计的测量误差随油含率升高呈现增大的趋势,最大测量洪差小于5%.椭圆齿轮流量计用于油水两相流测量时相对测量误差小于1.0%且基本不受油含率影响.
参考文献
| [1] | Pal R .Metering of Two-Phase Liquid-liquid Emulsions:a State of the Art Review[J].Industrial and Engineering Chemistry Research,1994,33(06):1413-1435. |
| [2] | Vigneaux P;Chenais P;Hulin J P et al.Liquid-Liquid Flows in an Inclined Pipe[J].AICHE Journal,1988,34(05):781-789. |
| [3] | Thorn R;Johansen G A;Hammer E A .Recent Developments in Three-Phase Flow Measurement[J].Measurement Science and Technology,1997,8(07):691-701. |
| [4] | Baker R C.Flow Measurement Handbook:Industrial Designs,Operating Principles,Performance,and Applications[M].Cambridge:Cambridge University Press,2000 |
| [5] | Li H Q.Two-Phase Flow Parameter Measurement and Applications[M].杭州:浙江大学出版社,1991 |
| [6] | Lin Z H.Characteristics of Gas-Liquid Two-Phase Flow in Pipelines and their Engineering Applications[M].西安:西安交通大学出版社,1992 |
| [7] | Johnson M W;Farroll S .Development of a Turbine Meter for Two-Phaee Flow Measurement in Vertical Pipes[J].Flow Measurement and Instrumentation,1995,6(04):279-282. |
| [8] | Oddie G;Pearson JRA .Row-rate measurement in two-phase flow[J].Annual Review of Fluid Mechanics,2004(0):149-172. |
| [9] | Zhiyao Huang;Dailiang Xie;Hongjian Zhang;Haiqing Li .Gas-oil two-phase flow measurement using an electrical capacitance tomography system and a Venturi meter[J].Flow Measurement and Instrumentation,2005(2/3):177-182. |
| [10] | Pal R .Flow of Oil in Water Emulsions Through Orifice and Venture Meters[J].Industrial and Engineering Chemistry Research,1993,32(06):1212-1217. |
| [11] | A. F. Skea;A. W. R. Hall .Effects of water in oil and oil in water on single-phase flowmeters[J].Flow Measurement and Instrumentation,1999(3):151-157. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%