欢迎登录材料期刊网

材料期刊网

高级检索

采用多弧离子镀技术,通过Ti-Al-Zr三元合金靶与Cr单质靶组合,在YG10X硬质合金钻头上制备了(CrTiAlZr)N多组元硬质膜.利用扫描电镜(SEM)和能谱分析(EDS)对膜层表面形貌、成分进行了观察和测试,系统考察了膜层的硬度和膜/基附着力.对镀膜钻头进行钻削高速钢试验,并对钻削后的钻头进行观察分析.结果表明,(CrTiAlZr)N多组元硬质膜达到超硬性同时具有良好的膜/基附着力,镀膜后的钻头与未镀膜钻头相比提高钻削寿命近5倍.

参考文献

[1] Novak S Komac M .Wear of cermet cutting tools coated with physically vapour deposited TiN[J].WEAR,1997,205:160-168.
[2] 张钧.多弧离子镀合金涂层成分离析效应的物理机制研究[J].真空科学与技术,1996(03):174-178.
[3] Jun ZHANG,Yu ZHANG,Li LI,Guoqiang LIN,Chuang DONG.Approximate Design of Alloy Composition of Cathode Target[J].材料科学技术学报(英文版),2006(05):639-642.
[4] Vetter J;Scholl J;Knotek O .(Ti,Cr)N coatings deposited by cathodic vacuum arc evaporation[J].Surface and Coatings Technology,1995,75(06):286-291.
[5] Chang YY;Wang DY .Characterization of nanocrystalline AlTiN coatings synthesized by a cathodic-arc deposition process[J].Surface & Coatings Technology,2007(15):6699-6701.
[6] Jun Zhang;Wenying Guo;Yu Zhang;Qiang Guo;Chuang Wang;Lipeng Zhang .Mechanical properties and phase structure of (TiAlZr)N films deposited by multi arc ion plating[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2009(17):4830-4834.
[7] 陈灵,曾德长,邱万奇,董小虹,黎炳雄,黄拿灿.M2和H13钢离子渗氮-电弧镀TiAlCrN膜复合技术[J].材料热处理学报,2009(04):175-179.
[8] A. Hoerling;J. Sjoelen;H. Willmann;T. Larsson;M. Oden;L. Hultman .Thermal Stability, Microstructure And Mechanical Properties Ofti_(1-x)zr_xn Thin Films[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2008(18):6421-6431.
[9] 侯晏红,李贺军,乔学亮.Ti一Al一N系功能梯度薄膜结合力的实验研究[J].功能材料,2000(Z1):87.
[10] 黄树涛,贾春德,姜增辉,于骏一.TiN涂层刀具高速车铣切削性能及磨损机理[J].哈尔滨工业大学学报,2008(09):1501-1505.
[11] Kovalev, AI;Wainstein, DL;Rashkovskiy, AY;Fox-Rabinovich, GS;Yamamoto, K;Veldhuis, S;Aguirre, M;Beake, BD .Impact of Al and Cr alloying in TiN-based PVD coatings on cutting performance during machining of hard to cut materials[J].Vacuum: Technology Applications & Ion Physics: The International Journal & Abstracting Service for Vacuum Science & Technology,2009(1):184-187.
[12] P.C. Jindal;A.T. Santhanam .Performance of PVD TiN, TiCN, and TiAlN coated cemented carbide tools in turning[J].International Journal of Refractory Metals & Hard Materials,1999(1/3):163-170.
[13] 吴善元.金属切削原理及刀具[M].北京:机械工业出版社,1995:6.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%