研究基体梯度结构对TiN涂层硬质合金力学和切削性能的影响;采用阴极弧蒸发涂层工艺分别在均质和梯度硬质合金基体上制备TiN涂层:运用金相观察、扫描电镜分析、三点抗弯强度测试、显微硬度测试和切削性能测试,研究基体梯度结构对TiN涂层硬质合金组织结构、力学性能和切削性能的影响.结果表明:基体结构梯度化后,TiN涂层表面形貌由平整状变为网状结构,显微硬度提高19%,抗弯强度提高6.1%;基体结构梯度化后,涂层硬质合金的结构发生变化、力学性能得到提高,涂层刀片的抗冲击性能和切削性能分别提高10%和15%左右.
参考文献
| [1] | 肖逸锋,贺跃辉,丰平,谢宏,马自省,张丽娟,黄自谦,黄伯云.渗碳工艺对WC-Co梯度硬质合金的梯度结构和硬度的影响[J].中国有色金属学报,2008(03):465-470. |
| [2] | Walter Lengauer;Klaus Dreyer .Functionally graded hardmetals[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2002(1/2):194-212. |
| [3] | 张武装,高海燕,刘咏.粘结相梯度结构硬质合金的研究现状[J].材料导报,2006(11):62-64. |
| [4] | Yilbas BS;Arif AFM;Karatas C;Ahsan M .Cemented carbide cutting tool: Laser processing and thermal stress analysis[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2007(12):5544-5552. |
| [5] | 高见,李建平,马文存,沈保罗,高升吉,易勇.WC基硬质合金CVD涂层的组织与性能[J].中国有色金属学报,2002(02):331-333. |
| [6] | 蔡志海,胡佳帅,杜月和,张平.TiN基复合涂层硬质合金刀具的力学性能与切削性能研究[J].装甲兵工程学院学报,2007(02):87-90. |
| [7] | B. Casas;U. Wiklund;S. Hogmark;L. Llanes .Adhesion and abrasive wear resistance of TiN deposited on electrical discharge machined WC-Co cemented carbides[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2008(3/4):490-496. |
| [8] | 尹飞,陈康华,王社权.基体的梯度结构对涂层硬质合金性能的影响[J].中南大学学报(自然科学版),2005(05):776-779. |
| [9] | Bouzakis, KD;Skordaris, G;Gerardis, S;Katirtzoglou, G;Makrimallakis, S;Pappa, M;Lill, E;M'Saoubi, R .Ambient and elevated temperature properties of TiN, TiAlN and TiSiN PVD films and their impact on the cutting performance of coated carbide tools[J].Surface & Coatings Technology,2009(6/7):1061-1065. |
| [10] | Li Chen;S.Q. Wang;S.Z. Zhou .Microstructure and mechanical properties of Ti(C, N) and TiN/Ti(C, N) multilayer PVD coatings[J].International Journal of Refractory Metals & Hard Materials,2008(5):456-460. |
| [11] | CHANGJIE F;MINGSHENG L;LI X;SHENGLONG Z FUHUI W .Mechanical properties and oxidation behavior of a graded (Ti,Al)N coating deposited by arc-ion plating[J].Oxidation of Metals,2006,65(5/6):307-327. |
| [12] | STONEY G .The tension of metallic films deposited by electrolysis[J].Proceedings of the Royal Society of London Series A:Mathematical,Physical and Engineering Sciences,1909,82:172-175. |
| [13] | 黄自谦,贺跃辉,蔡海涛,肖逸锋,黄伯云.TiAlN涂层的热残余应力分析[J].中国有色金属学报,2007(06):897-902. |
| [14] | PalDey S.;Deevi SC. .Single layer and multilayer wear resistant coatings of (Ti,Al)N: a review [Review][J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):58-79. |
| [15] | JONSSON B;HOGMARK S .Hardness measurements of thin films[J].THIN SOLID FILMS,1984,114(03):257-269. |
| [16] | Sato K.;Ichimiya N.;Kondo A.;Tanaka Y. .Microstructure and mechanical properties of cathodic arc ion-plated (Al,Ti)N coatings[J].Surface & Coatings Technology,2003(0):135-143. |
| [17] | 许香谷;肖诗纲.金属切削原理与刀具[M].重庆:重庆大学出版社,1992:79. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%