对几种铺层的非对称／非均衡层压板在纯弯载荷下的耦合变形进行了模拟分析，并进行了板宽、板厚等参数的影响分析，在此基础上设计了一套四点弯曲柔性支持装置。采用该装置对两种铺层的非对称／非均衡层压板进行了柔性四点弯曲试验，并与常规四点弯曲试验进行了对比。柔性四点弯曲装置对非对称／非均衡层压板施加弯曲载荷的同时没有限制试件的扭转变形，而常规四点弯曲几乎完全限制了非对称／非均衡层压板的扭转变形。柔性四点弯曲加载装置基本上达到了设计要求，可用于非对称／非均衡层压板弯一扭耦合系数的测试。
A numerical simulation for bending - twisting coupling deformation of unsymmetrical and unbalanced composite laminates under bending load was conducted. The parameters such as laminate width and thickness were also studied. Based on the simulation results, a flexible support device for the four- point- bending test was developed. The flexible four-point- bending tests for unsymmetrical and unbalanced composite laminates were conducted. The test results show that the developed flexible four- point- bending support device does not constrain the twisting deformation of laminates while applying bending load to it. The flexible four-point-bending support device is capable of measuring bending - twisting coupling coefficient of unsymmetrical and unbalanced composite laminates.
参考文献
| [1] | 邹从青.气动弹性剪裁的机理和效益[J].复合材料学报,1989,6(4):1-9. |
| [2] | Shirk M H,Hertz T J,Weisshaar T A.Aeroelastic tailoring-theory,practice and promise[J].Journal of Aircraft,1986,23(1):6-8. |
| [3] | 万志强,邹珂,杨超,王科.非均衡铺层壁板复合材料机翼气动弹性分析[J].复合材料学报,2008,21(1):196-199. |
| [4] | American Society for Testing and Materials.ASTM D7264M-07Standard test method for flexural properties of polymermatrix composite materials[S].United States:ASTM,2007. |
| [5] | American Society for Testing and Materials.ASTM D790-03Standard test methods for flexural properties of unreinforcedand reinforced plastics and electrical insulating materials[S].United States:ASTM,2003. |
| [6] | 全国纤维增强塑料标准化技术委员会.GB/T3356-1999单向纤维增强塑料弯曲性能试验方法[S].北京:中国标准出版社,1999. |
| [7] | 庄茁,张帆,岑松.ABAQUAS非线性有限元分析与实例[M].北京:科学出版社,2005. |
| [8] | 煤炭工业部煤炭科学研究院上海研究所.液压传动设计手册[M].上海:上海科学技术出版社,1981. |
| [9] | 徐灏.机械设计手册,第3卷[M].北京:机械工业出版社,2004. |
| [10] | 陈少杰.复合材料设计手册[M].北京:航空工业出版社,1990. |
| [11] | 琼斯 R M.复合材料力学[M].朱颐龄,译.上海科学技术出版社,1981. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%