采用热轧法制备不锈钢/铁屑包层钢筋,通过不同扩散退火工艺处理试件,应用光学显微镜和显微硬度仪对结合界面复合情况及复合界面附近显微硬度进行了分析.通过剪切实验测试了两金属间的复合强度,并应用SEM分析了剪切断面的微观形貌.运用扩散理论研究了不同退火工艺对Cr元素扩散的影响,应用EDS测得Cr元素的分布情况.结果表明:通过热轧制备的不锈钢/铁屑包层钢筋复合界面附近仍存在一些微小孔洞,通过扩散退火处理可以减少孔洞数量,提高复合界面剪切强度,提高温度增加保温时间可以使剪切断裂面上的剪切韧窝变得更加细密,均匀.在退火温度900℃,保温90 min,剪切强度可以达到441 MPa,同时提高退火温度增加保温时间可以增加Cr元素的扩散距离,提高复合界面的结合强度.
参考文献
| [1] | Choi S H;Kim K H;Oh K H et al.Tensile deformation behavior of stainless steel clad aluminum bilayer sheet[J].Materials Science and Engineering,1997,222(02):158-165. |
| [2] | T.Mori;S.Kurimoto .Deformation characteristics of Aluminum-clad stainless steel sheet under uniaxial tension[J].Journal of manufacturing science and engineering,1998(1):179-184. |
| [3] | Nizamettin Kahraman;Behcet Giilenc;Fefaim Findik .Joining of titanium/stainless steel by explosive welding and effect on interface[J].Journal of Materials Processing Technology,2005(2):127-133. |
| [4] | K. Raghukandan .Analysis of the explosive cladding of cu-low carbon steel plates[J].Journal of Materials Processing Technology,2003(1/3):573-577. |
| [5] | 吴彩虹,李廷举,金俊泽.双金属复层材料制备现状及研究进展[J].铸造,2005(02):103-107. |
| [6] | 焦少阳,董建新,张麦仓,郑磊.双金属热轧复合的界面结合影响因素及结合机理[J].材料导报,2009(01):59-62. |
| [7] | 程挺宇.不锈钢/碳钢热轧复合工艺及性能[J].上海金属,2009(01):48-50,58. |
| [8] | N. Venkateswara Rao;D. S. Sarma;S. Nagarjuna .Influence of hot rolling and heat treatment on structure and properties of HSLA steel explosively clad with austenitic stainless steel[J].Materials Science and Technology,2009(11):1387-1396. |
| [9] | 李佩,周世平,刘少斌,刘绍虎,陈丽华,王健.退火条件对AgCuNi/TU1复合界面的影响[J].贵金属,2010(03):12-15. |
| [10] | Bae D S;Chae Y R;Lee S P et al.Effect of post heat treatment on bonding interfaces in Ti/Mild steel/Ti clad materials[J].Procedia Engineering,2011,10:996-1001. |
| [11] | 谢红飙,高亚男,王涛,肖宏.多道次热轧对包层钢筋性能及结合面的影响[J].金属学报,2011(12):1513-1519. |
| [12] | 高亚男,谢红飙,肖宏,王健.不锈钢/碳钢包层钢筋轧制模拟分析与试验研究[J].钢铁,2011(11):56-60. |
| [13] | Bulent Kurt;Adnan Calik .Interface structure of diffusion bonded duplex stainless steel and medium carbon steel couple[J].Materials Characterization,2009(9):1035-1040. |
| [14] | Bhadeshia H K D H;Honeycombe R W K.Steels Microstructure and Properties[M].Oxford:Butterworth-Heinemann Ltd,2006 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%