欢迎登录材料期刊网

材料期刊网

高级检索

研究了热处理工艺对Ti-48Al-7Nb-2.5V-1.0Cr铸造合金组织、室温及900℃拉伸性能的影响.结果表明:铸造合金经1200℃/12 h/AC+1320℃/0.5 h/AC两步热处理后获得双态组织(DP);经1200℃/12 h/AC +1350℃/1 h/CC两步热处理后获得近片层组织(NL).由拉伸实验结果可知,同合金铸态组织相比,DP和NL组织合金的室温塑性均得到明显的改善,断后伸长率由铸态的0.4%提高至双态组织的1.2%,近片层组织的1%~2%;但合金的室温及900℃的强度有不同程度的下降.

参考文献

[1] Kim Y W .Microstructural evolution and mechanical properties of a forged gamma titanium aluminide alloy[J].Acta Metal Mater,1992,40(06):1121-1134.
[2] Chen G L;Zhang W J;Liu Z C.Microstructure and properties of high-Nb containing TiAl-base alloys[A].Warrendale,PA:TMS,1999:31-40.
[3] Liu C T;Maziasz P J .Microstructural control and mechanical properties of dual-phase TiAl alloys[J].INTERMETALLICS,1998,6(7-8):653-661.
[4] Jarvis DJ;Voss D .IMPRESS integrated project - An overview paper[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(0):583-591.
[5] X.WU .Review of alloy and process development of TiAl alloys[J].Intermetallics,2006(10/11):1114-1122.
[6] 李海昭,张继.Al含量对高Nb铸造TiAl合金高温强度和室温塑性的影响[J].金属学报,2013(11):1423-1427.
[7] NICHOLAS BIERY;MARC DE GRAEF;JACK BEUTH .Use of Weibull Statistics to Quantify Property Variability in TiAl Alloys[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2002(10):3127-3136.
[8] 张继;张志宏;石建东 等.TiAl合金细小全层片组织形成机理[J].金属学报,1998,34(09):919-922.
[9] Johnson D R;Inui H;M uto S et al.Microstructural development during directional solidification of α-seeded TiAl alloys[J].Acta Materialia,2006,54:1077-1085.
[10] Zhang W J;Evangelista E;Francesconi L .Effect of prior cooling rate on the gain size of fully-lamellar TiAl-base alloy developed by tempering/ quenching[J].Scripta Materialia,1996,35(01):41-45.
[11] 蒲忠杰;石建东;邹敦叙 等.TiAl基合金组织对拉伸性能的影响[J].金属学报,1993,29(08):365-370.
[12] F.A. Guo;V. Ji;W. Seiler .Residual Stress Effects on Mechanical Properties of a Two Phase TiAl-Based Intermetallic Alloy[J].Materials Science Forum,2002(0):367-372.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%