基于剩余强度和剩余刚度取决于同-损伤状态的假设,给出了基于剩余刚度的损伤定义和基于剩余强度的损伤定义之间的关系,建立了剩余刚度-剩余强度关联模型.用3种不同铺层形式的层压板试验数据对本文中提出的剩余刚度模型及剩余强度模型进行了验证,结果表明:本文中提出的剩余刚度和剩余强度模型能很好地描述复合材料层压板疲劳过程中的剩余刚度和剩余强度退化规律;通过关联模型,可以在已知剩余刚度退化规律的前提下,用少量剩余强度试验确定剩余强度退化规律;与剩余刚度关联的剩余强度模型中的参数可以被认为是材料常数.
参考文献
| [1] | 杜善义.先进复合材料与航空航天[J].复合材料学报,2007,24(1)11-12.Du Shanyi.Advanced composite materials and aerospace engineering[J].Acta Materiae Compositae Sinica,2007,24(1):1-12. |
| [2] | Ramesh T.Fatigue of composite materials[M].Lancaster:Teehnomic Publishing Company,1987:9-22. |
| [3] | 冯培锋,王殿富,杜善义,等.层板复合材料疲劳性能的唯象学研究模型及其应用[J].材料科学与工程,2002,20(2):192-195.Feng Peifeng,Wang Dianfu,Du Shanyi,et al.Phenomenological research models for the fatigue of composite laminates and its application[J].Materials Science & Engineering,2002,20(2):192-195. |
| [4] | 翟洪军,姚卫星.纤维增强树脂基复合材料的疲劳剩余刚度研究进展[J].力学进展,2002,32(1):69-80.Zhai Hongjun,Yao Weixing.A survey on stiffness reduction models of fiber reinforced plastics under cyclic loading[J].Advances in Mechanics,2002,32(1):69-80. |
| [5] | 冯培锋,杜善义,王殿富,等.层板复合材料的疲劳剩余刚度衰退模型[J].固体力学学报,2003,24(1):46-52.Feng Peifeng,Du Shanyi,Wang Dianfu,et al.Fatigue residual stiffness degradation model for composite laminates[J].Acta Mechanica Solida Sinica,2003,24(1):46-52. |
| [6] | 顾怡,姚卫星.疲劳加载下纤维复合材料的剩余强度[J].复合材料学报,1999,16(3):98-102.Gu Yi,Yao Weixing.Residual strength of fiber-reinforced-plastics under fatigue loading[J].Acta Materiae Compositae Sinica,1999,16(3):98-102. |
| [7] | 顾怡.复合材料拉伸剩余强度及其分布[J].南京航空航天大学学报,1999,31(2):164-171.Gu Yi.A model of tensile residual strength of FRP and its distribution[J].Journal of Nanjing University of Aeronautics and Astronautics,1999,31(2):164-171. |
| [8] | Shokrieh M M,Lessard L B.Multiaxial fatigue behavior of unidirectional plies based on uniaxial fatigue experiments Ⅰ:Modeling[J].International Journal of Fatigue,1997,19(3):201-207. |
| [9] | Whitworth H A.Modeling stiffness reduction of graphite/epoxy composite laminates[J].Journal of Composite Materials,1987,21(4):362-372. |
| [10] | 冯培锋,王殿富,杜善义,等.复合材料层板基于剩余刚度比的剩余强度模型[J].应用力学学报,2001,18(1):41-44.Feng Peifeng,Wang Dianfu,Du Shanyi,et al.A fatigue residual strength model for composite laminates based on residual stiffness ratio[J].Chinese Journal of Applied Mechanics,2001,18(1):41-44. |
| [11] | Van Paepegem W,Degrieck J.A new coupled approach of residual stiffness and strength for fatigue of fibre-reinforced composites[J].International Journal of Fatigue,2002,24(7):747-762. |
| [12] | Fong J T.What is fatigue damage[C]//Reifsnider K L,ed.Damage in Composite Materials,ASTM STP 775.Badaliane:American Society for Testing and Materials,1982:243-266. |
| [13] | Chou P C,Robert C.Residual strength in fatigue based on the strength-life equal rank assumption[J].Journal of Composite Materials,1978,12(2):177-194. |
| [14] | Reifsnider K L,Stinchcomb W W,O'Brien T K.Frequency effects on a stiffness-based fatigue failure criterion in flawed composites specimens[C]//Fatigue of Filamentary Composite Materials,STP 636.Philadelphia:American Society for Testing and Materials,1977:171-184. |
| [15] | Reifsnider K L,Henneke E G,Stinchcomb W W,et al.Damage mechanics and NDE of composite laminates[C]//Mechanics of Composite Materials,Recent Advances.New York:Pergamon Press,1983:399-420. |
| [16] | Lee C H,Jen M H.Fatigue response and modeling of variable stress amplitude and frequency in AS-4/PEEK composite laminatesⅠ:Experiments[J].Journal of Composite Materials,2000,34(11):906-929. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%