欢迎登录材料期刊网

材料期刊网

高级检索

简要介绍了大块金属玻璃及其复合材料的研究现状及其应用领域.针对大块金属玻璃塑性低的不足,回顾了提高其塑性的原理和方法;通过对比铸造法,提出了粉末冶金法制备大块金属玻璃及其复合材料的成形原理和方法,进而详细介绍了电火花烧结、挤压、热压、扭转等方法制备大块金属玻璃及其复合材料的研究进展.最后,指出制备具有延性析出相的大块金属玻璃基复合材料将可能是未来粉末冶金法的研究趋势之一.

参考文献

[1] Inoue A .Stabilization of metallic supercooled liquid and bulk amorphous alloys[J].Acta Materials,2000,48:279.
[2] Telford M .The case for bulk metallic glass[J].Materials Today,2004,3:36.
[3] Wang WH;Dong C;Shek CH .Bulk metallic glasses[J].Materials Science & Engineering, R. Reports: A Review Journal,2004(2/3):45-89.
[4] Masumoto T .Recent progress in amorphous metallic mate-rials in Japan[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1994,179-180:13.
[5] Choi G S et al.Ultrahigh tensile st-rength of amorphous Al-Ni-(Nb,Gd)-Fe alloys containing nanocrystalline Al parti-cles[J].Scripta Metallurgica et Materialia,1995,33(08):1301.
[6] Gu YW;Goh CW;Goi LS;Lim CS;Jarfors AEW;Tay BY;Yong MS .Solid state synthesis of nanocrystalline and/or amorphous 50Ni-50Ti alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):222-228.
[7] Koch C C;Cavin O B;Mckamey C G et al.Preparation of "amorphous" Ni60 Nb40 by mechanical alloying[J].Applied Physics Letters,1983,43:1017.
[8] Eckert J .Mechanical alloying of highly processable glassy alloys[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1997,226-228:364.
[9] Zhang Z W et al.Formation of crystalline and amorphous solid solutions of W-Ni-Fe powder during mechanical allo-ying[J].Journal of Alloys and Compounds,2004,370:186.
[10] Lee P Y;Hung S S;Hsieh J T et al.Consolidation of a-morphous Ni-Zr-Ti-Si powders by vacuum hot-pressing method[J].Intermetallics,2002,10:1277.
[11] Sordelet DJ.;Rozhkova E.;Besser MF.;Kramer MJ. .Consolidation of gas atomized Cu47Ti34Zr11Ni8 amorphous powders[J].Journal of Non-Crystalline Solids: A Journal Devoted to Oxide, Halide, Chalcogenide and Metallic Glasses, Amorphous Semiconductors, Non-Crystalline Films, Glass-Ceramics and Glassy Composites,2003(1/2):137-143.
[12] Botta Filho W J et al.Consolidation of partially amorphous aluminium-alloy powders by sever plastic deformation[J].Ma-ter Sci Eng A,2004,375-377:936.
[13] Bomer I;Echert J .Phase formation and properties of me-chanically alloyed amorphous Al85 Y8Ni8Co2[J].Scripta Materialia,2001,45:237.
[14] Ozaki K;Nishio T;Matsurnoto A et al.Preparing Mg-Ni-Si amorphous powders by mechanical alloying and consolida-tion by pulsed current sintering[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,375-377:857.
[15] Gandhi A S;Jayaram V .Pressure consolidation of amor-phous ZrO2-Al2O3 by plastic deformation of powder patti-cles[J].Acta Materials,2002,50:2137.
[16] Zhang D L .Processing of advanced materials using high-en-ergy mechanical milling[J].Progress in Materials Science,2004,49:537.
[17] Inoue A .Stabilization and high strain-rate super plasticity of metallic supercooled liquid[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1999,267:171.
[18] 高玉来,孙剑飞,王刚,沈军,周彼德,李庆春.粉末冶金工艺对大块非晶合金性能的影响[J].粉末冶金技术,2003(02):104-107.
[19] Robertson J.;Im JT.;Karaman I.;Hartwig KT.;Anderson IE. .Consolidation of amorphous copper based powder by equal channel angular extrusion[J].Journal of Non-Crystalline Solids: A Journal Devoted to Oxide, Halide, Chalcogenide and Metallic Glasses, Amorphous Semiconductors, Non-Crystalline Films, Glass-Ceramics and Glassy Composites,2003(1/2):144-151.
[20] Lee MH.;Bae DH.;Kim WT.;Kim DH.;Rozhkova E.;Wheelock PB.;Sordelet DJ. .Synthesis of Ni-based bulk amorphous alloys by warm extrusion of amorphous powders[J].Journal of Non-Crystalline Solids: A Journal Devoted to Oxide, Halide, Chalcogenide and Metallic Glasses, Amorphous Semiconductors, Non-Crystalline Films, Glass-Ceramics and Glassy Composites,2003(1/2):89-96.
[21] Kato H;Kawamura Y et al.Bulk glassy Zr-based alloys prepared by consolidation of glassy alloy powders in super-cooled liquid region[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1997,226-228:458.
[22] Mathaudhu SN;Hartwig KT;Karaman I .Consolidation of blended powders by severe plastic deformation to form amorphous metal matrix composites[J].Journal of Non-Crystalline Solids: A Journal Devoted to Oxide, Halide, Chalcogenide and Metallic Glasses, Amorphous Semiconductors, Non-Crystalline Films, Glass-Ceramics and Glassy Composites,2007(26):185-193.
[23] Lee P Y;Hung S S;Hsieh J T et al.Consolidation of a-morphous Ni-Zr-Ti-Si powders by vacuum hot-pressing method[J].Intermetallics,2002,10:1277.
[24] Jeng I K;Lee P Y .Mechanically alloyed tungsten carbide particle/Ti50 Cu28 Ni15 Sn7 glassy alloy matrix composites[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2007,449-451:1090.
[25] Li F S;Zhang T;Guan S K et al.A novel dual-amorphous-phased bulk metallic glass with soft magnetic properties[J].Materials Letters,2005,59:1453.
[26] Yavari A R et al.Nanostruetured bulk Al90Fe5Nd5 prepared by cold consolidation of gas atomized powder using severe plastic deformation[J].Scripta Materialia,2002,46:711.
[27] Munir ZA;Anselmi-Tamburini U;Ohyanagi M .The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method[J].Journal of Materials Science,2006(3):763-777.
[28] Xie G;Zhang W;Louzguine-Luzgin D V et al.Fabrication of porous Zr-Cu-Al-Ni bulk metallic glass by Spark plasma sintering process[J].Scripta Materialia,2006,55:687.
[29] Kim C K;Lee H S;Shin S Y et al.Microstructure and mechanical properties of Cu-based bulk amorphous alloy bil-lets fabricated by spark plasma sintering[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2005,406:293.
[30] Kim C K;Lee S;Shin S Y et al.Mierostructure and me-chanical properties of Cu-base amorphous alloy matrix com-posites consolidated by spark plasma sintering[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2007,449-451:924.
[31] Lee J K;Kim H J;Kim T S et al.Deformation behavior of Ni-based bulk metallic glass synthesized by spark plasma sintering[J].Journal of Materials Processing Technology,2007,187-188:801.
[32] Saito T;Takeuchi T;Kageyama H .Magnetic properties of Nd-Fe-Co-Ga-B magnets produced by spark plasma sintering method - art. no. 10H103[J].Journal of Applied Physics,2005(10):H103-0.
[33] Li YY;Yang C;Chen WP;Li XQ .Effect of WC content on glass formation, thermal stability, and phase evolution of a TiNbCuNiAl alloy synthesized by mechanical alloying[J].Journal of Materials Research,2008(3):745-754.
[34] Kuhn U;Mattern N;Gebert A;Kusy M;Bostrom M;Siegel U;Schultz L .Nanostructured Zr- and Ti-based composite materials with high strength and enhanced plasticity[J].Journal of Applied Physics,2005(5):4307-1-4307-4-0.
[35] 杨超 .多场耦合-非晶晶化法制备块状钛基合金的研究[D].广州:华南理工大学,2007.
[36] Roy D;Kumari S;Mitra R et al.Microstructure and me-chanical properties of mechanically alloyed and spark plasma sintered amorphous-nanocrystalline Al65 Cu20 Ti15 intermetal-lic matrix composite reinforced with TiO2 nanoparticles[J].In-termetallics,2007,15:1595.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%