吸附床是固体吸附制冷系统的关键部件，对于连续回热等快速进行的吸附制冷循环，吸附床内温度的变化及其压力交变对吸附特性的影响不可忽视。本文对吸附床在吸附、解吸过程中的温度场和吸附率分布进行了模拟计算，并将其与采用平衡吸附模型的计算结果进行了比较，文中比较及结论有助于深入认识吸附床在制冷循环中工作特性，并为吸附床的设计提供参考依据。
The adsorbent bed is the key element of an adsorption refrigeration system.Its operation characteristics of temperature and pressure affect theadsorption characteristics and cycle performance greatly. The discussions about the temperature and adsorbed mass distribution in the adsorbent bedduring adsorption and desorption processes are shown with numerical method.Both models with equilibrium and non-equilibrium adsorption are compared with each other. It is concluded that non-equilibrium adsorption should beconsidered for solid adsorption refrigeration particularly for short cycletime. The discussion and comparison are helpful to reveal operating performance of adsorbent bed and also to provide reference to the design of adsorbent bed.
参考文献
| [1] | 郑德馨;刘芙蓉.多组分气体分离[M].西安:西安交通大学出版社,1988 |
| [2] | A Sokoda;M Suzuki .Fundamental Study on Solar Powered AdsorptionCooling System[J].Journal of Chemical Engineering of Japan,1984,17(01):52-57. |
| [3] | E F Passos;J F Escobedo;F Meunier .Simulation of an IntermittentAdsorptive Solar Cooling System[J].太阳能,1989,42(02):103-111. |
| [4] | Bidywt B Soha;Elisa C Boelman;Takao Kashiwagi .Computer Simulation ofa Silica Gel-Water Adsorption Refrigeration Cycle- the Influence of OperatingConditions on Cooling Output and COP[J].ASHRAE Transactions,1995,101:348-357. |
| [5] | 滕毅 .非吸附平衡条件下的吸附式制冷循环研究[D].上海交通大学,1998. |
| [6] | 李明 .基於太阳能利用的固体吸附式制冷循环研究[D].上海交通大学,1999. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%