采用3种焊丝对2519铝铜合金进行MIG焊,研究了孕育剂Ti、Zr对焊缝组织和性能的影响.结果表明:Ti和Zr的细化作用是相容的,当焊丝中单独添加孕育剂Ti或Zr时,焊缝几乎由粗大的柱状晶组成;焊丝中复合添加少量的孕育剂Ti和Zr时,Ti和Zr在熔池中分别形成Al3Ti和Al3Zr,促进了α(Al)非均质形核;随着焊丝中Ti和Zr含量的增加,焊缝组织逐步细化,当焊丝中Ti和Zr含量较高时,Ti和Zr还在熔池中形成大量的Al3(Ti,Zr)质点,促进α(Al)非均质形核;焊缝组织由细小均匀的等轴晶组成,显著提高了接头强度和塑性.
参考文献
| [1] | 任峻 et al.[J].Foundry Technology(铸造技术),2006,279(08):847. |
| [2] | 陈亚军,许庆彦,黄天佑.铝合金晶粒细化剂研究进展[J].材料导报,2006(12):57-61. |
| [3] | 张胜华 et al.[J].Journal of Central South University:Science and Technology(中南大学学报),2005,36(03):386. |
| [4] | 兰晔峰.[J].Foundry Technology(铸造技术),2005(09):774. |
| [5] | 蒋建军.[J].Light Alloy Fabrication Technology(轻合金加工技术),2004(02):18. |
| [6] | Fu Gaosheng;Chen Wenzhe;Qian Kuangwu .Refining Effect of a New Al3Ti1B1RE Master Alloy on Al Sheets Used for Can Manufacture and Behavior of Rare Earths in Master Alloy[J].Journal of Rare Earths,2003(5):571-576. |
| [7] | 朱正锋;兰晔峰.[J].Research on Foundry Equipment(铸造设备研究),2004(02):51. |
| [8] | Ma Xiaoguang et al.[J].Journal of Alloys and Compounds,2009,471(1-2):56. |
| [9] | 胡宪正,梁超,于金,谈荣生,曾宇乔,蒋建清.稀土对AlTiC细化剂组织及细化效果的影响[J].中国稀土学报,2004(02):247-250. |
| [10] | Moldovan P et al.[J].Journal of the Minerals,2004,56(11):59. |
| [11] | Sturz L et al.[J].Materials Science and Engineering A,2005,413(10):379. |
| [12] | Janaki R G et al.[J].Journal of Materials Processing Technology,2003,142(01):174. |
| [13] | Janaki Ram G D et al.[J].Materials Science and Engineering A,2000,276(1-2):48. |
| [14] | Glenn A M et al.[J].MICRON,2001,32(08):841. |
| [15] | Murty B et al.[J].International Materials Reviews,2002,47(01):3. |
| [16] | Liu Zhongxia et al.[J].Materials Science and Engineering A,2008,483(15):120. |
| [17] | HE Yong-dong,ZHANG Xin-ming,YOU Jiang-hai.Effect of minor Sc and Zr on microstructure and mechanical properties of Al-Zn-Mg-Cu alloy[J].中国有色金属学会会刊（英文版）,2006(05):1228-1235. |
| [18] | Selvi D et al.[J].Materials Science and Engineering A,2007,467(1-2):132. |
| [19] | Norman AF.;Hyde K.;Costello F.;Thompson S.;Birley S.;Prangnell PB. .Examination of the effect of Sc on 2000 and 7000 series aluminium alloy castings: for improvements in fusion welding[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):188-198. |
| [20] | Hyuck M L et al.[J].Scripta Metallurgica et Materialia,1991,25(03):517. |
| [21] | Nayak S S et al.[J].INTERMETALLICS,2007,15(01):26. |
| [22] | 国旭明 et al.[J].Transaction of the China Welding Institution(焊接学报),2004,25(04):6. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%