以氧化物组分为主,经过750℃煅烧,成功制备了Ba-Ti-B-Si-O玻璃陶瓷,烧结温度为900℃左右的低温共烧陶瓷组合材料,其性能为:1MHz时相对介电常数εr在10左右,介质损耗系数tanδ在2.0×10-3左右,基本满足作为低温共烧陶瓷材料的性能指标.与高温熔融法比较,直接煅烧法获得的LTCC烧结体中存在较多气孔,影响了烧结体的介电稳定性和烧结特性,为了使该LTCC粉体更具有实用价值,研究发现,2%～5%(质量分数)Al2O3的搀杂可以明显改善烧结体的微观结构,气孔基本消除,材料的体电阻率增大,使其介电性能稳定;但随着氧化铝含量超过10%(质量分数),烧结体致密度下降,介电性能变差.
参考文献
| [1] | Dernovsek O et al.[J].Journal of the European Ceramic Society,2001,21(10-11):1693. |
| [2] | Kingery W D.Introduction to CeramicsJohn Wiley & Sons Inc[M].John Wiley & Sons Inc,1976 |
| [3] | Tummala R R et al.[P].US Patent:4301324,1981. |
| [4] | 王岩 等.[J].稀有金属材料与工程,2003,32(zk):614. |
| [5] | Cheng Chungchin.[J].Materials Chemistry and Physics,2003(79):119. |
| [6] | Sung Hun Yoon.[J].Journal of the European Ceramic Society,2003(23):2549. |
| [7] | Dai S X.[J].Journal of the American Ceramic Society,2002(85):828. |
| [8] | Kim D W.[J].Materials Research Bulletin,2001(36):585. |
| [9] | Chen C S.[J].Journal of the European Ceramic Society,2004(24):1795. |
| [10] | Huang W.[J].Journal of the European Ceramic Society,2003(23):2559. |
| [11] | Kuang X.[J].Advanced Performance Materials,1997(04):257. |
| [12] | Lo C L.[J].Journal of Materials Research,2003(38):693. |
| [13] | Cheng C C.[J].Journal of the European Ceramic Society,2003(23):2553. |
| [14] | Kim JE.;Yang YS.;Kim SJ. .Dielectric and conduction behavior of xBaTiO(3) center dot (1-x)SiO2 glasses[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(0):487-490. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%