在切削速度25～200 m/min范围内,使用涂层硬质合金刀具对高强度钢30CrMnSiA进行了内孔镗削实验,对比研究了干镗削与油润滑条件下加工表面粗糙度轮廓曲线的特征信号构成及其对形状参数Ra和Ry的影响规律.研究表明:在实验条件范围内,油性切削液对表面粗糙度指标Ra和Ry值没有显著影响,且随切削速度的改变,在干镗削与油润滑条件下,表面轮廓曲线的变化趋势基本相同;切削润滑条件的改变将对20～40 μm波长尺度的特征轮廓曲线产生影响.
参考文献
| [1] | Bruni C;Dapolito L.Finish milling operations of AISI 420B stainless steel under dry and wet conditions[A].Reggio Calabria,Italy,2007:275. |
| [2] | P. G. Benardos;G. -C. Vosniakos .Predicting surface roughness in machining: a review[J].International Journal of Machine Tools & Manufacture: Design, research and application,2003(8):833-844. |
| [3] | A. E. Diniz;J. R. Ferreira;F. T. Filho .Influence of refrigeration/lubrication condition on SAE 52100 hardened steel turning at several cutting speeds[J].International Journal of Machine Tools & Manufacture: Design, research and application,2003(3):317-326. |
| [4] | 章刚,刘军,刘永寿,岳珠峰.表面粗糙度对表面应力集中系数和疲劳寿命影响分析[J].机械强度,2010(01):110-115. |
| [5] | 吴松青.表面粗糙度应用指南[M].北京:机械工业出版社,1990 |
| [6] | 张东初,裴旭明.加工工艺对表面粗糙度及疲劳寿命的影响[J].中国机械工程,2003(16):1374-1377. |
| [7] | 郑远谋.机械加工和表面粗糙度对金属材料硬度测试数据的影响[J].理化检验-物理分册,2000(11):486-489. |
| [8] | Sara T;Li M;Takata S et al.Analysis of surface roughness generation in turning operation and its applications[J].CIRP Annals-Manuf Techn,1985,34(1):473. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%