Titanium alloy (Ti6Al4V) and Iow carbon steel (LCS) were joined by explosive welding method using different ratios of explosive. Some metallurgical properties of joined samples were investigated. Joined samples were examined by means of optical microscope, scanning electron microscope (SEM) and tensile-shearing tests. Bending, tensile, hardness and corrosion behaviour of the samples were investigated. Separation was not occurred on the joining interface after tensile-shearing and bending tests. It is seen that hardness of both plates were increased with increasing explosive.It is found that increasing explosive ratio leads to an increase in corrosion. It is also found that corrosion rate was high at the beginning of the experiment but the rate of the corrosion decreased subsequently during the experiment.
参考文献
| [1] | M Acarer;B Güenc;F Findik .[J].Materials & Design,2003,24(08):659. |
| [2] | R. Kacar;M. Acarer .Microstructure-property relationship in explosively welded duplex stainless steel-steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):290-296. |
| [3] | Y Li;H Hashimoto;E Sukedia;Y Zhang,Z Zhang .[J].Journal of Electron Microscopy,2000,49(01):5. |
| [4] | D G Brasher;D J Butler.[J].Current Advances in Materials and Processes,1995(03):37. |
| [5] | Explosion Welding.Fundamentals of Process[A].,1992:264. |
| [6] | A G Mamalis;A Szalay;N M Vaxevanidis;D I Pantelis .[J].Materials Science and Engineering A,1994,188:267. |
| [7] | A Abe .[J].JSME International Journal,1997,40(03):395. |
| [8] | V Balasubramanian;M Rathinasabapathi;K Raghukan .[J].Journal of Materials Processing Technology,1997,63:83. |
| [9] | K Aghukandan .[J].Journal of Materials Processing Technology,2003,139(1-3):573. |
| [10] | M Gerland;H N Presles;J P Guin;D Bertheau .[J].Materials Science and Engineering A,2000,280:311. |
| [11] | Z Li;S L Gobbi;I Norris;S Zolotovsky,K H Richter.[J].Journal of Materials Processing Technology,1997:65. |
| [12] | Z Li;S L Gobbi;I Norris;S Zolotovsky,K H Richter.[J].Journal of Materials Processing Technology,1997:203. |
| [13] | E N Codaro;R Z Nakazato;A L Horovistiz;L M F Ribeiro,R B Ribeiro,L R O Hein .[J].Materials Science and Engineering A,2003,341(1-2):202. |
| [14] | J Oh;N J Kim;S Lee;E W Lee .[J].Materials Science and Engineering A,2003,340(1-2):232. |
| [15] | S Kleven.[J].Materials Evaluation,1996:557. |
| [16] | ASTM Designation D 3165-1995[S].ASTM Standard,1995. |
| [17] | G R Covan;O R Bergman;A H Holtzman .[J].Metallurgical Transactions,1971,2:3145. |
| [18] | Z Livne;A Munitz .[J].Journal of Materials Science,1987,22:1495. |
| [19] | Y. YANG;Z. XINMING;L. ZHENGHUA .ADIABATIC SHEAR BAND ON THE TITANIUM SIDE IN THE Ti/MILD STEEL EXPLOSIVE CLADDING INTERFACE[J].Acta materialia,1996(2):561-565. |
| [20] | B Crossl;J D Williams .[J].Metall Rev Review,1970,144:79. |
| [21] | M Acarer;B Güenc;F Findik.5th Inter. Fracture Conference, Firat University[C].Elazig-Turkey,2001:301. |
| [22] | V V Trutnev;Svar Proiz .[J].Welding Production,1973,7:33. |
| [23] | M Tüker .[D].School of Materials,University of Leeds,Leeds,UK,1993. |
| [24] | M Tüker;A T Hughes .[J].Oxidation of Metals,1995,44(5-6):505. |
| [25] | Yalcin;T Koc.Corrosion for Engineers, UCTEA[M].Publishing of Chamber of Chemical Engineers,Ankara,1997 |
| [26] | N Kahraman .[D].Gazi University,Ankara,Turkey,2003. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%