采用化学沉淀制备纳米羟基磷灰石(HA)粉体,用单向压缩方法将纳米HA粉体压制成型,用不同的烧结工艺制备致密HA.探讨了烧结温度、烧结时间、预制压力对致密HA压缩强度和弯曲强度的影响,同时研究了烧结过程中烧结温度影响HA晶粒长大的规律.结果表明纯HA理想的烧结温度在1100~1300℃之间;最佳的预制压力为200MPa;提高烧结温度和延长烧结时间有利于提高纯HA的压缩强度和弯曲强度;HA晶粒初始长大温度为900℃,温度小于1100℃时HA的晶粒长大速度较慢.
参考文献
[1] | Shih WJ;Wang JW;Wang MC;Hon MH .A study on the phase transformation of the nanosized hydroxyapatite synthesized by hydrolysis using in situ high temperature X-ray diffraction[J].Materials science & engineering, C. Biomimetic and supramolecular systems,2006(8):1434-1438. |
[2] | Bhattacharjee S;Swain SK;Sengupta DK;Singh BP .Effect of heat treatment of hydroxyapatite on its dispersibility in aqueous medium[J].Colloids and Surfaces, A. Physicochemical and Engineering Aspects,2006(1/3):164-170. |
[3] | 廖其龙,徐光亮,周大利,尹光福,郑昌琼,李晓东.水热合成纳米羟基磷灰石粉末及其结构表征[J].四川大学学报(工程科学版),2002(03):69-71. |
[4] | 孟祥才,孙振淋,吕奎龙.烧结工艺对HA粒子尺寸的影响[J].佳木斯大学学报(自然科学版),2005(01):85-87. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%