采用刚塑性有限元研究了不同通道宽度比侧向挤压时材料的变形分布、载荷及速度场.结果表明,随通道宽度比的增加,等效应变较大的区域逐渐由坯料的上部转到下部.宽度比为2时,通道拐角外侧坯料存在少量变形死区,使坯料下部变形严重.随通道宽度比的降低,坯料中变形较均匀的区域减小,拐角处间隙增大.当宽度比为0.67时,坯料产生明显畸变.挤压过程中的最大载荷随通道宽度比增加而增加.
参考文献
| [1] | 刘祖岩;王尔德 .[J].Journal of Harbin Institute of Technology(哈尔滨工业大学学报),2007,39(03):409. |
| [2] | Valiev RZ.;Alexandrov IV.;Islamgaliev RK. .Bulk nanostructured materials from severe plastic deformation [Review][J].Progress in materials science,2000(2):103-189. |
| [3] | Valiev R Z;Langdon T G .[J].Progress in Materials Science,2006,51(07):881. |
| [4] | 许晓静;张雪峰;刘桂玲 et al.[J].Chinese Journal of Mechanical Engineering(机械工程学报),2008,44(01):222. |
| [5] | 杨西荣,赵西成,付文杰.变形方式对工业纯钛室温ECAP组织及性能影响[J].稀有金属材料与工程,2009(11):1910-1915. |
| [6] | Saray O;Purcek G .[J].Journal of Materials Processing Technology,2009,209(05):2488. |
| [7] | Kim H S;Seo M H;Hong S I .[J].Materials Science and Engineering A,2000,291(1-2):86. |
| [8] | Kim H S .[J].Materials Science and Engineering A,2006,430(1-2):346. |
| [9] | Laszlo S. Toth;Rimma Lapovok;Arman Hasani .Non-equal channel angular pressing of aluminum alloy[J].Scripta materialia,2009(12):1121-1124. |
| [10] | Seung Chae Yoon;Zenji Horita;Hyoung Seop Kim .Finite element analysis of plastic deformation behavior during high pressure torsion processing[J].Journal of Materials Processing Technology,2008(1-3):32-36. |
| [11] | Balasundar I;Sudhakara Rao M;Raghu T .[J].Materials & Design,2009,30(04):1050. |
| [12] | Shi F J;WANG L G .[J].Materials Science Forum,2008,575-578:311. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%