Using 3-D elastic-plastic FEM, the cold strip rolling process in a 4-high mill was simulated. The elastic deformation of rolls, the plastic deformation of the strip, and the pressure between the work roll and the backup roll were taken into account. The distribution of rolling pressure along the strip width was obtained. Based on the simulation results, the peak value of rolling pressure and the location of the peak were analyzed under different rolling conditions. The effects of the roll bending force and the strip width on the distribution of rolling pressure along the width direction were determined.
参考文献
[1] | Ginzburg Vladimir B.High-Quality Steel Rolling Theory and Practice[M].New York,USA:Marcel Deker Inc,1993 |
[2] | LIU Xiang-hua.Rigid-Plastic FEM and Its Application in Rolling[M].北京:冶金工业出版社,1994 |
[3] | Yuuji Mitai;Hisasi Iribe .Analysis of Strip Rolling by Three-Dimensional Rigid-Plastic FEM[R].Tokyo:NIPP Steel,1992. |
[4] | Xiong S;Liu X;Wang G .Simulation of Vertical-Horizontal Rolling Process During Width Reduction by Full Three-Dimensional Rigid-Plastic Finite Element Method[J].Journal of Materials Engineering and Performance,1997,6:757-765. |
[5] | H. Gao;S.C. Ramalingam;G.C. Barber .Analysis of asymmetrical cold rolling with varying coefficients of friction[J].Journal of Materials Processing Technology,2002(1/2):178-182. |
[6] | Jeswiet J .Aspect Ratio,Friction Forces and Normal Force in Strip Rolling[J].Journal of Materials Processing Technology,1995,53(3-4):846-856. |
[7] | Le H R;Sutcliffe M P F .A Robust Model for Rolling of Thin Strip and Foil[J].International Journal of Mechanical Sciences,2001,43(10):1405-1419. |
[8] | Cavaliere Miguel A;Goldschmit Marcela B;Dvorkin Eduardo N .Finite Element Analysis of Steel Rolling Processes[J].Computers & Structures,2001,79(22-25):2075-2089. |
[9] | Angelov T.;Nedev A. .FINITE-ELEMENT ANALYSIS OF A HOT-ROLLING PROBLEM WITH NONLINEAR FRICTION[J].Advances in engineering software,1997(9):555-561. |
[10] | Yuen W Y D;Dixon A;Nguyen D N .The Modelling of the Mechanics of Deformation in Flat Rolling[J].Journal of Materials Processing Technology,1996,60(1-4):87-94. |
[11] | Y.J. Liu;A.K. Tieu;D.D. Wang .Friction measurement in cold rolling[J].Journal of Materials Processing Technology,2001(1/3):142-145. |
[12] | 朱光明,杜凤山,孙登月,周坚刚,朱泉封.计算冷轧带钢工作辊接触压扁的Hitchcock公式的有限元修正[J].机械工程学报,2003(08):135-137. |
[13] | 孙登月,杜凤山,朱光明,周坚刚.冷轧带钢轧制力高精度快速仿真模型的研究[J].钢铁,2003(06):32-35. |
[14] | Lin Zone-Ching;Lin Ven-Huei .Analysis of the Variation of the Cold-Rolling Characteristics of Rolling Force,Strip Shape,Stress and Temperature,for a Three-Dimensional Strip[J].Journal of Materials Processing Technology,1995,54(1-4):326-340. |
[15] | 谢红飙,肖宏,张国民,尹学霞.显式动力学有限元法分析板宽对板带轧制压力分布的影响[J].塑性工程学报,2003(01):61-64. |
[16] | XU Zhi-rang;SUN Zhong-jian .Calculation of Rolling Force Transversal Distribution for 4-High Mill (in Chinese)[J].Journal of Iron and Steel Research,1998,10(04):23-26. |
[17] | 张国民,肖宏,谢红飙.板带轧制过程的三维耦合有限元分析[J].塑性工程学报,2004(05):46-49. |
[18] | XU Zhi-rang .Contact Pressure and Spalling of the Roll in a Four-High Mill (in Chinese)[J].Measurement Science and Technology,1998,7(04):598-600. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%