为研究工艺因素对含损伤边缘闭合复合材料蜂窝夹芯板胶接修理效果的影响,使用不同工艺参数对含单侧蒙皮损伤和穿透损伤的蜂窝夹芯板进行胶接修理,并对修理后结构的侧压性能进行了试验研究.使用k样本AndersonDarling检验方法对试验结果进行分析,以比较固化温度及固化设备等工艺因素对修理后试件侧压性能的影响.结果表明:两种修理方法均可以有效地恢复试件的侧压强度,所有试件的压缩强度恢复率均达到无损伤板的90%以上;使用中温固化材料完成修理会明显降低结构的侧压性能,同时使用热压罐完成固化可以提升修理后试件的侧压强度,但提升程度十分有限;另外修理时要尽量避免非对称结构对承载能力造成的不利影响.
参考文献
[1] | 杜善义,关志东.我国大型客机先进复合材料技术应对策略思考[J].复合材料学报,2008(01):1-10. |
[2] | PIPES R B;A DKINS D W;DEATON J .Strength and repair of bonded scarf joints for repair of compositematerials[R].Washington:NASA,1982. |
[3] | WANG C H;GUNNION A J .On the design methodology of scarf repair to composite laminates[J].Composites Science and Technology,2008,68:35-46. |
[4] | B. Whittingham;A.A. Baker;A. Harman .Micrographic studies on adhesively bonded scarf repairs to thick composite aircraft structure[J].Composites, Part A. Applied science and manufacturing,2009(9):1419-1432. |
[5] | KUMAR S B;SRIDHAR I;SIVASHANKER S I et al.Tensile failure of adhesively bonded CFRP composites scarf joints[J].materials science and engineering b-solid state materials for advanced technology,2006,132:113-120. |
[6] | R.D.S.G. Campilho;M.F.S.F. de Moura;D.A. Ramantani .Tensile behaviour of three-dimensional carbon-epoxy adhesively bonded single- and double-strap repairs[J].International Journal of Adhesion & Adhesives,2009(6):678-686. |
[7] | John L. Avery III;Bhavani V. Sankar .Compressive failure of sandwich beams with debonded face-sheets[J].Journal of Composite Materials,2000(14):1176-1199. |
[8] | HANSEN I .Compression behavior of FRP sandwich specimen with interface debonded[J].Journal of Composite Materials,1998,32(04):335-360. |
[9] | TOMBLIN J S;SALAH L;WELCH J M et al.Bonded repair of aircraft composite sandwich structures[R].Washington DC:U.S.Department of Transportation & Federal Aviation Administration,2004. |
[10] | TOMBLIN J S;LACY T;SMITH B et al.Review of damage tolerance for composite sandwich airframe structures[R].Washington DC:U.S.Department of Transportation & Federal Aviation Administration,1999. |
[11] | 汪海,陈秀华,郭杏林,任明法.复合材料蜂窝夹芯结构修理后强度研究[J].航空学报,2001(03):270-273. |
[12] | 赵美英,孙晓波,万小朋.蜂窝夹芯结构板芯脱胶修补研究[J].航空学报,2003(05):474-476. |
[13] | 周银华,赵美英,王瑜,万小朋.含穿透损伤复合材料蜂窝夹芯修补结构强度分析[J].西北工业大学学报,2011(04):536-541. |
[14] | ARMSTRONG K B;BEVAN L G;COLE II W F.Care and repair of advanced composites[M].PA USA:SAE international,2005:263-265. |
[15] | Boeing 737-800.Structural Repair Manual[S].USA:Boeing Ltd,2003. |
[16] | Airbus A320.Structural Repair Manual[S].France:Airbus Ltd,2007. |
[17] | Department of Defense.MIL-HDBK-17-1G Polymer Matrix Composites Guidelines for Characterization of Structural Materials[M].Washington PA USA:Materials Sciences Corporation,MIL-HDBK-17 Secretariat,2009:465-586. |
[18] | HB 7618-2099.聚合物基复合材料力学性能数据表达准则[S].北京:国防科学技术工业委员会,2009. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%