采用粉末冶金的方法在1000℃和30 MPa的热压条件下,烧结制备了以Ti3AlC2为增强相的Ti3AlC2/Cu复合材料,研究了增强相含量(10%～40%)对复合材料的显微结构、抗弯强度、硬度和电阻率的影响.结果表明:Ti3AlC2能够有效增强铜,当Ti3AlC2含量为30%时,增强效果最佳,复合材料的抗弯强度达1033 MPa,最大形变为2.5%,增强相含量继续增加时,复合材料的强度反而降低;随着增强相含量的增加,复合材料渐趋脆性断裂,同时复合材料的电阻率基本呈线性升高.
参考文献
| [1] | Ibrahim L A;Mohamed F A;Lawernia E J .[J].Journal of Materials Science,1991,26:1137. |
| [2] | Groza J R;Gilbeling J G .[J].Sci Eng,1993,A171:115. |
| [3] | Barsoum M W .[J].Progress in Solid State Chemistry,2000,28:201. |
| [4] | Tzenov Nikolay V;Barsoum Michel W .[J].Journal of the American Ceramic Society,2000,83:825. |
| [5] | 张毅,周延春.Ti3SiC2弥散强化Cu：一种新的弥散强化铜合金[J].金属学报,2000(06):662-666. |
| [6] | Peng Chunqing;Wang Chang'an;Qi Liang et al.[J].Materials Science Forum,2005,475-479:1247. |
| [7] | Ai Mingxing;Zhai Hongxiang;Zhou Yang;Tang Zhaoyun;Huang Zhenying;Zhang Zhili;Li Shibo .Synthesis of Ti{sub}3AlC{sub}2 Powders Using Sn as an Additive[J].Journal of the American Ceramic Society,2006(3):1114-1117. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%