欢迎登录材料期刊网

材料期刊网

高级检索

利用双锥试样热压缩实验研究了GH738合金的动态再结晶行为,通过有限元软件计算得到样品纵剖面应变和温度的定量分布规律,进而构建合金动态再结晶的动力学曲线,并分析了热压缩温度对再结晶动力学的影响规律.结果表明:将双锥试样压缩至高12 mm时,其纵剖面中心线位置的真应变量呈对称分布且连续变化,边缘最低应变量为0.47,心部应变量峰值为2.61,该区域温度基本保持稳定;动态再结晶比例随真应变呈“S”形曲线变化,随着预热温度的降低,再结晶形核所需应变量增大,晶粒尺寸减小,但完成再结晶所需应变量无明显变化.

参考文献

[1] 姚志浩;董建新;张麦仓;洪成淼.固溶及稳定化工艺对GH738合金碳化物和γ'相析出规律的影响[J].材料热处理学报,2013(10):43-49.
[2] D.S. Weaver;S.L. Semiatin.Recrystallization and grain-growth behavior of a nickel-base superalloy during multi-hit deformation[J].Scripta materialia,200711(11):1044-1047.
[3] Amiri, A.;Bruschi, S.;Sadeghi, M.H.;Bariani, P..Investigation on hot deformation behavior of Waspaloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:77-82.
[4] Li WANG;Gang YANG;Ting LEI;Shu-biao YIN;Lu WANG.Hot Deformation Behavior of GH738 for A-USC Turbine Blades[J].钢铁研究学报(英文版),2015(11):1043-1048.
[5] 东赟鹏;王超渊;宋晓俊;陈由红;张敏聪;王淑云.GH5188合金流变行为研究[J].锻压技术,2013(6):116-121.
[6] Wang, J.;Dong, J.;Zhang, M.;Xie, X..Hot working characteristics of nickel-base superalloy 740H during compression[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:61-70.
[7] Bi, Z.;Zhang, M.;Dong, J.;Luo, K.;Wang, J..A new prediction model of steady state stress based on the influence of the chemical composition for nickel-base superalloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,201016/17(16/17):4373-4382.
[8] 王珏;梅莹.690合金铸锭和锻件的镦粗过程数值模拟[J].锻压技术,2015(10):5-11.
[9] HOSSEIN BELADI;PAVEL CIZEK;PETER D. HODGSON.Dynamic Recrystallization of Austenite in Ni-30 Pct Fe Model Alloy: Microstructure and Texture Evolution[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,20095(5):1175-1189.
[10] Jiang, He;Dong, Jianxin;Zhang, Maicang;Zheng, Lei;Yao, Zhihao.Hot deformation characteristics of Alloy 617B nickel-based superalloy: A study using processing map[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2015:338-350.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%