欢迎登录材料期刊网

材料期刊网

高级检索

基于微观相场模型,模拟研究中间处理+时效处理(1273 K+1073 K)工艺对Ni-15.5%Al-10.5%Cr(原子分数,下同)合金沉淀机制和有序相体积分数的影响.研究发现:经过中间处理,合金沉淀机制为非经典形核长大;而单级时效时,沉淀机制为等成分有序化+失稳分解混合机制.中间处理可得到尺寸较大的沉淀强化相γ'相,有序相体积分数和平均长程序参数有所提高,孕育期比单级时效延长.

参考文献

[1] 陈国良.高温合金学[M].北京:冶金工业出版社,1988:5.
[2] 黄乾尧;李汉康.高温合金[M].北京:冶金工业出版社,2000:4.
[3] Huang W;Chang Y A .[J].INTERMETALLICS,1999,7(08):863.
[4] Dupin N.;Sundman B.;Ansara I. .Thermodynamic re-assessment of the ternary system Al-Cr-Ni.[J].Calphad: Computer Coupling of Phase Diagrams and Thermochemistry,2001(2):279-298.
[5] Pareige C.;Martin G.;Blavette D.;Soisson F. .Ordering and phase separation in Ni-Cr-Al: Monte Carlo simulations vs three-dimensional atom probe[J].Acta materialia,1999(6):1889-1899.
[6] Pareige-Schmuck C.;Blavette D.;Soisson F. .Ordering and phase separation in low supersaturated Ni-Cr-Al alloys: 3D atom probe and Monte Carlo simulation[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1):99-103.
[7] Raable D.计算材料学[M].北京:化学工业出版社,2002:10.
[8] Khachatuyran A G.Theory of Structural Transformations in Solids[M].New York:Wiley,1983:23.
[9] Chen Longqing .[J].Scripta Metallurgica et Materialia,1993,29(05):683.
[10] Poduri R;Chen L Q .[J].Acta Materialia,1997,46(05):1719.
[11] Ochiai S;Oya Y;Suzuki T .[J].Acta Materialia,1984,32(02):289.
[12] Marty A;Bessiere M;Bley F .[J].Acta Metallurgica Et Materialia,1990,38(02):345.
[13] Wu Y P;Tso N C;Sanchez J M .[J].Acta Materialia,1989,37(10):2835.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%