欢迎登录材料期刊网

材料期刊网

高级检索

基于均匀化理论建立了计算具有微观周期性结构的钨纤维增强锆基块体非晶复合材料的黏弹性力学模型;结合有限单元法在拉氏域中计算了该复合材料的等效松弛模量,用最小二乘法拟合得到用Prony级数表示的松弛模量;并进一步得到拉氏域中的蠕变柔量;然后进行拉氏逆变换,得到时间域内的等效复合模量和蠕变柔量;分析了钨纤维体积分数对复合材料等效黏弹性能的影响。结果表明,将均匀化理论与有限元方法相结合能有效地预测具有微观周期性结构的钨纤维增强锆基块体非晶复合材料的黏弹性能,进而有效地优化该类复合材料性能。

Based on the homogenization theory, a mechanical model to calculate the viscoelastic properties of tungsten fiber reinforced Zr-based bulk metallic glass matrix composites (W/Zr-BMGMCs) with periodic microstructure was formulated. The equivalent relaxation modulus of this composite material was then calculated in the Laplace domain combined with the finite element method. The creep compliance in the Laplace domain can be further achieved through the relaxation modulus expressed by Prony series fitted with the method of least squares. Consequently, equivalent composite modulus and creep compliance in the time domain can be obtained by means of inverse Laplace transform . The effects of the volume fraction of tungsten fiber on the equivalent viscoelastic properties of (W/Zr-BMGMCs) were further studied. The results demonstrate that a combined approach of the homogenization theory and the finite element formulation can effectively anticipate the viscoelastic properties of (W/Zr-BMGMCs) with periodic microstructure, and thus provide basis for effective optimization of this kind of composites.

参考文献

[1] 张晓立,王金相,孙宇新,付艳恕,刘家骢.钨丝增强块体非晶复合材料的研究进展[J].稀有金属材料与工程,2008(08):1323-1328.
[2] 姜斐;陈光;王志华;高度 .钨丝/非晶复合材料的制备方法和力学行为研究进展[J].稀有金属材料与工程,2011,40(07):426-430.
[3] PEKER A;JOHNSON W L .A highly processable metallic glass Zr 41.2 Ti 13.8 Cu 12.5 Ni 10.0 Be 22.5[J].Applied Physics Letters,1993,63(17):2342-2344.
[4] 许福,龙志林,彭建,张平.块体非晶合金剪切带的原子力纳米压痕行为[J].中国有色金属学报,2011(06):1444-1449.
[5] 杨元政,董振江,仇在宏,陈小祝,谢致薇,白晓军.块体非晶合金Cu58Zr20Ti20Mo2的形成与力学性能[J].中国有色金属学报,2007(07):1090-1095.
[6] BRUCK H A;CHRISTMAN T;ROSAKIS A J;JOHNSON W L .Quasistatic constitutive behavior of Zr 41.25 Ti 13.75 Ni 10 Cu 12.5 Be 22.5 bulk amorphous alloys[J][J].Scripta Materialia,1994,30(04):429-434.
[7] 马卫锋,寇宏超,李金山,陈春生,杜三明,周廉,傅恒志.钨丝增强Zr基非晶复合材料动态力学行为及断裂特性[J].中国有色金属学报,2008(06):1045-1050.
[8] 刘文辉,张新明,张淳源.均匀化方法在粘弹性多层复合材料中的应用[J].计算力学学报,2005(06):722-727.
[9] HILL R .A self-consistent mechanics of composite materials[J].Journal of the Mechanics and Physics of Solids,1965,13(04):213-222.
[10] Barbero EJ.;Luciano R. .MICROMECHANICAL FORMULAS FOR THE RELAXATION TENSOR OF LINEAR VISCOELASTIC COMPOSITES WITH TRANSVERSELY ISOTROPIC FIBERS[J].International Journal of Solids and Structures,1995(13):1859-1872.
[11] Hassani B.;Hinton E. .A review of homogenization and topology optimization I - homogenization theory for media with periodic structure [Review][J].Computers & structures,1998(6):707-717.
[12] Hassani B.;Hinton E. .A review of homogenization and topology optimization II - analytical and numerical solution of homogenization equations [Review][J].Computers & structures,1998(6):719-738.
[13] 刘书田,马宁.复合材料粘弹性本构关系与热应力松弛规律研究Ⅰ:理论分析[J].复合材料学报,2005(01):152-157.
[14] 刘书田;马宁 .粘弹性复合材料热应力松弛与本构关系研究(П):数值分析[J].复合材料学报,2005,22(01):158-163.
[15] 王勖成.有限单元法[M].北京:清华大学出版社,2003:46-47.
[16] 魏培君,张双寅,吴永礼.粘弹性力学的对应原理及其数值反演方法[J].力学进展,1999(03):317.
[17] Danut Dragoi;Ersan Ustundag;Bjorn Clausen .Investigation of thermal residual stresses in tungsten-fiber/bulk metallic glass matrix composites[J].Scripta materialia,2001(2):245-252.
[18] L.S. Huo;J.F. Zeng;W.H. Wang .The dependence of shear modulus on dynamic relaxation and evolution of local structural heterogeneity in a metallic glass[J].Acta materialia,2013(12):4329-4338.
[19] ZAK A R .Structural analysis of realistic solid-propellant materials[J].Journal of Spacecraft and Rockets,1968,5(03):270-275.
[20] Shen TK.;Hing P. .ULTRASONIC THROUGH-TRANSMISSION METHOD OF EVALUATING THE MODULUS OF ELASTICITY OF AL2O3-ZRO2 COMPOSITE[J].Journal of Materials Science,1997(24):6633-6638.
[21] Weimin Zhang,Ping Zhang,Xuhui Deng,Chunyuan Zhang.PREDICTION OF THE VISCOELASTIC PROPERTIES OF THE EQUIVALENT PARTICLE FOR THE INTERCALATED MULTI-LAYER STACK OF NANOPLASTICS[J].固体力学学报(英文版),2007(04):317-323.
[22] 基于均匀化方法的钨丝增强锆基块体非晶复合材料等效弹性常数预测[J].中国有色金属学报,2014(06):1449-1458.
[23] 袁欣,孙慧玉.三维四向编织复合材料的黏弹性能[J].复合材料学报,2012(02):167-171.
[24] 武晓峰,张海峰,胡壮麒.W丝/Zr-Ti-Cu-Ni-Be-Co非晶基复合材料的制备与塑性变形[J].辽宁工学院学报(自然科学版),2005(02):102-106.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%