采用机械化学法制备了纳米铜/蛇纹石复合润滑材料,利用微动摩擦磨损试验机考察了其作为润滑油添加剂的摩擦学性能,借助纳米压痕仪（nano-in-denter）、扫描电子显微镜（SEM）、能量色散谱仪（EDS）及光电子能谱仪（XPS）对磨损表面进行了表征,探讨了减摩抗磨机理。结果表明复合润滑材料具有优异的摩擦学性能,其摩擦因数及磨损率分别较基础油降低约16.4%和69.2%。复合润滑剂颗粒参与了摩擦界面复杂的理化作用,形成了致密光滑的保护膜,主要由Fe、Si等元素组成,具有较高的微观力学性能,提高了摩擦表面的磨损抗力,显著地降低了摩擦磨损。
A copper nanoparticles/serpentine composite as lubricating material was prepared using mechano-chemical method.The tribological properties of the as-prepared material as oil additive were evaluated by employing an oscillating friction and wear tester.The worn surface was characterized by means of nano-indenter,scanning electron microscopy（SEM） equipped with energy dispersive spectroscopy（EDS） and X-ray photoelectron spectrometer（XPS）.The mechanism for the friction and wear reducing properties was discussed.Results indicate the composite lubricating material exhibits excellent tribological properties.The friction coefficient and wear rate decrease by 16.4% and 69.2% compared to those of the base oil,respectively.The composite lubricating additive particles have participated in the complex physicochemical interactions at the friction interface and induced the formation of a smooth and compact tribofilm enriched in Fe,Si elements on the worn surface,which possesses high nano-mechanical properties,as improves the wear resistance and results in the significantly reduced friction and wear.
参考文献
| [1] | 高玉周,张会臣,许晓磊,王亮,陈文刚.硅酸盐粉体作为润滑油添加剂在金属磨损表面成膜机制[J].润滑与密封,2006(10):39-42. |
| [2] | 张博,徐滨士,许一,王晓丽.微纳米层状硅酸盐矿物润滑材料的摩擦学性能研究[J].中国表面工程,2009(01):29-32,36. |
| [3] | Yu, HL;Xu, Y;Shi, PJ;Xu, BS;Wang, XL;Liu, Q;Wang, HM .Characterization and nano-mechanical properties of tribofilms using Cu nanoparticles as additives[J].Surface & Coatings Technology,2008(1/2):28-34. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%