粉末注射成形技术是一种高效的近净成形技术,适用于生产小型的、具有复杂形状的零部件.本文综述了粉末注射成形技术的发展历程;概述了粉末注射成形原理,包括粉末和粘结剂的选择、混炼,注射成形及后续的脱脂、烧结;并介绍了粉末微注射成形技术的技术特点、注射工艺和微注射成形的应用;分析了粉末注射成形技术的局限性;展望了粉末注射成形技术的发展趋势,认为其材料体系将朝多方向发展,且应开发新的粘结剂和新的脱脂工艺以减少脱脂后在材料中的残留,开发少粘结剂、无粘结剂注射成形工艺;微粉末注射成形将朝成形数微米甚至纳米级的零部件的方向发展,防止粉末的氧化和保形是关键.
参考文献
| [1] | German RM;Bose A;German RM;Bose A.Injection Molding of Metals and Ceramics[M].Metal Powder Industries Federation,1997 |
| [2] | Williams B .Parmatech Shapes Metals like Plastics[J].Metal Powder Report,1989,44(10):675-680. |
| [3] | R. Zauner;C. Binet;D. F. Heaney .Variability of feedstock viscosity and its correlation with dimensional variability of green powder injection moulded components[J].Powder Metallurgy,2004(2):151-156. |
| [4] | 王光耀,何浩,李益民,张健光.工艺参数对金属粉末共注射成形芯层熔体形貌的影响[J].中国有色金属学报,2011(08):1847-1854. |
| [5] | 李美玲,李益民,何浩,李流军.水雾化不锈钢粉末注射成形坯的溶剂脱脂技术[J].粉末冶金材料科学与工程,2011(01):61-66. |
| [6] | 刘煜;李益民;夏卿坤;何浩 王光耀 .基于颗粒模型的狭小型腔粉末微注射成形粉末冶金[J].材料科学与工程学报,2010,15(5):427-432. |
| [7] | 赵丽明,曲选辉,何新波,李世琼.Ti-47.5Al-2.5V-1.0Cr注射成形[J].北京科技大学学报,2008(10):1144-1148. |
| [8] | 段柏华,曲选辉,章林,秦明礼,张深根,李平.磁粉粒度对注射成形粘结NdFeB磁体性能的影响[J].中国有色金属学报,2007(10):1627-1631. |
| [9] | 田常娟,何新波,梅敏,曲选辉.粉末注射成形制备Si_3N_4颗粒增强316L不锈钢[J].北京科技大学学报,2011(11):1373-1377. |
| [10] | 李科,崔大伟,曲选辉.固溶处理对注射成形0Cr17Mn11Mo3N钢组织性能的影响[J].材料热处理学报,2007(01):58-61. |
| [11] | 褚克,贾成厂,梁雪冰,曲选辉.注射成形制备SiCp/Al复合材料电子封装盒体的预成形坯[J].北京科技大学学报,2007(05):470-474. |
| [12] | 乔斌,尚峰,丁梅,李化强,贺毅强,杨建明.316L不锈钢粗粉注射成形工艺的研究[J].航空材料学报,2010(01):30-35. |
| [13] | 乔斌,尚峰,李化强.Fe-Ni-Cu-C合金粗粉的注射成形工艺[J].航空材料学报,2007(05):45-48. |
| [14] | Ehrfeld W;Lehr H .Deep X-ray lithography for the production of three-dimensional microstructures from metals,polymers and ceramics[J].Radiation Physics and Chemistry,1995,45(3):349-365. |
| [15] | Liu ZY;Loh NH;TorS B;Khor KA Murakoshi Y Maeda R .Production of micro-components by micro-powder injection molding[J].Journal of Materials Science Letters,2001,20(4):307-309. |
| [16] | 李笃信,黄伯云.金属注射成形技术研究进展[J].粉末冶金材料科学与工程,2002(01):24-30. |
| [17] | T. Shimizu;A. Kitazima;M. Nose .Production of large size parts by MIM process[J].Journal of Materials Processing Technology,2001(1/3):199-202. |
| [18] | K. Scott Weil;Eric Nyberg;Kevin Simmons .A new binder for powder injection molding titanium and other reactive metals[J].Journal of Materials Processing Technology,2006(1/3):205-209. |
| [19] | H. Abolasani;N. Muhamad .A new starch-based binder for metal injection molding[J].Journal of Materials Processing Technology,2010(6/7):961-968. |
| [20] | 李笃信,李益民,曲选辉,黄伯云.金属粉末注射成形粘结剂[J].材料导报,2000(05):36-39. |
| [21] | 肖平安;胡业奇;刘吉梓 等.一种粉末注射成形用梯度负压热脱脂技术[P].中国,200610136879.8,2007-06-06. |
| [22] | 李益民,K.A.Khalil,黄伯云.金属注射成形17-4PH不锈钢脱脂保形性研究[J].稀有金属材料与工程,2005(01):22-27. |
| [23] | 邓忠勇;李益民;唐嵘;李笃信,李松林,黄伯云 .真空脱脂、烧结一体炉[P].中国,03202704.4,2003-12-31. |
| [24] | 戴煜;王利民 .分压控制式真空脱脂烧结一体炉[P].中国,200420035435.1,2005-08-17. |
| [25] | GERMAN R M.Powder injection molding[M].Princeton:Powder Industries Federation,1997:1-10. |
| [26] | Rudolf Zauner .Micro powder injection moulding[J].Microelectronic engineering,2006(4/9):1442-1444. |
| [27] | Rota A C.New Features in Material Issues for Metallic Micro Components by MIM Proceedings of PM-TEC[M].Orlando,Florida,USA,2002:10-49-10-57. |
| [28] | Rota A C;Petzoldt F;Imgrund P.Micro Moulding of Advanced Material Combinations[A].State College PA,USA |
| [29] | Astrid Rota.New featur es in material issues for metallic micro components by MIM[A].Or lando,Florida,USA,2002:10-55. |
| [30] | Merz L;Rath S;Piotter V .Feedstock development for micro powder injection molding[J].MICROSYSTEM TECHNOLOGIES,2002,8:130-132. |
| [31] | Merz L;Rath S;Piotter V .Powder injection molding of metallic and ceramic micro parts[J].MICROSYSTEM TECHNOLOGIES,2004,10:203-204. |
| [32] | FLEISCHER J;BUCHHOLZ C .Automation of the powder injection moulding process for micro-mechanical parts[J].Powder Technology,2008,17:19-22. |
| [33] | Tay B Y;Liu L;Loh N H .Injection molding o f 3D microstructures by PIM[J].MICROSYSTEM TECHNOLOGIES,2005,11:211-213. |
| [34] | YIN Hai-qing;QU Xuan-hui.Fabrication of micro gear wheelsby micro-powder injection molding[J].Journal of University of Science and Technology Beijing,2008(15):480-483. |
| [35] | 杜美娜,尹海清,曲选辉.微粉末注射成形[J].粉末冶金工业,2007(05):34-39. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%