欢迎登录材料期刊网

材料期刊网

高级检索

根据相似原理采用修正Froude准数相等,对承德150t提钒转炉进行物理模拟,选取相似比为1∶6。通过研究确定了纯顶吹状态下熔池冲击面积和穿透深度的变化规律,并得出冲击直径与穿透深度比值为3.1时混匀效果最佳。对底枪布置研究确立了底枪支数和布置方式对熔池混匀的影响,此试验中8支底枪非对称布置熔池混匀时间最短,平均混匀时间为38.6s。

According to the similitude principle,the Chengsteel 150t vanadium extraction converter was simulated and investigated by 1∶6 water model based on the same correction Fr.The results show the characteristics of the impinging area and penetrating depth in converter bath is obtained during only top gas blowing,and the bath has the best mixing effect when the ratio of impinging diameter and penetrating depth is 3.1.The effect of mixing time was figured out on different number and different configurations of bottom lances.The shortest mixing time can be obtained with the eccentric asymmetry configuration of 8 bottom lances,the lowest mixing time is 38.6 s.

参考文献

[1] 马恩祥,蔡志鹏,钱占民,魏伟胜,涂鸿,温昌才,陈大慈,汤克庆.氧枪射流特性对炼钢过程的影响[J].化工冶金,1991(04):370-376.
[2] 朱英雄;于华财 .20t顶底复吹转炉水模研究[J].东北大学学报,1996,17(01):51.
[3] 王明合,胡黎宁,田新中,李新杰,阎宗根,叶树峰,黄晔.顶吹气体平面射流对熔池穿透深度的冷态实验研究[J].河北冶金,2002(03):16-19,22.
[4] Ludwing Fiege .Influence of Bottom Purging on the Metallur- gical Results Achieved in the LD Steelmaking Plants of Krupp Stahl AG[J].Metallurgical Plant and Technology,1983,6(05):32.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%