欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 材料导报
  4. 超细晶钛合金的制备及性能研究现状

材料导报, 2013, 27(13): 94-112.

超细晶钛合金的制备及性能研究现状

王苗 1, , 杨延清 2, , 罗贤 3,

1.西北工业大学材料学院,凝固技术国家重点实验室,西安710072

2.西北工业大学材料学院,凝固技术国家重点实验室,西安710072

3.西北工业大学材料学院,凝固技术国家重点实验室,西安710072

基金项目:   国家自然科学基金(51071122,51271147)  

关键词： 超细晶 , 钛合金 , 制备方法 , 显微组织 , 力学性能

Research Status in Preparation and Properties of Ultra-fine Grained Ti Alloys

WANG Miao 1, , YANG Yanqing 2, , LUO Xian 3,

1.西北工业大学材料学院,凝固技术国家重点实验室,西安710072

2.西北工业大学材料学院,凝固技术国家重点实验室,西安710072

3.西北工业大学材料学院,凝固技术国家重点实验室,西安710072

Keywords： ultra-fine grain , Ti alloy , preparation method , microstructure , mechanical property

总结了目前国内外超细晶钛合金的制备方法,主要包括大变形法、氢处理法和热机械处理法等,并评述了其显微组织和力学性能.采用以上方法获得的超细晶钛合金均表现出优异的力学性能,但室温延展性还有待进一步提高.分析了各种制备方法的优缺点,提出了获得更好性能匹配的相关策略.

参考文献

[1] G.G. Yapici;I. Karaman;Z.P. Luo .Mechanical twinning and texture evolution in severely deformed Ti-6A1-4V at high temperatures[J].Acta materialia,2006(14):3755-3771.
[2] Saitova, LR;Hoeppela, HW;Goeken, M;Semenova, IP;Raab, GI;Valiev, RZ .Fatigue behavior of ultrafine-grained Ti-6Al-4V 'ELI' alloy for medical applications[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2009(1/2):145-147.
[3] Young Gun Ko;Dong Hyuk Shin;Kyung-Tae Park .An analysis of the strain hardening behavior of ultra-fine grain pure titanium[J].Scripta materialia,2006(10):1785-1789.
[4] 范志国 .超细晶纯Ti及TiNi合金制备及其组织与力学行为[D].上海交通大学,2009.
[5] Fan Z G .Microstructures and mechanical deformation behaviors of ultrafine-grained commercial pure (grade 3) Ti processed by two-step severe plastic deformation[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2009,527(1-2):45.
[6] Yang Con Kim .Effect of equal-channel angular pressing routes on high-strain-rate deformation behavior of ultra-finegrained aluminum alloy[J].Acta Materialia,2010,58(07):2545.
[7] Majid Hoseini .Thermal stability and annealing behaviour of ultrafine grained commercially pure titanium[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2012,532:58.
[8] Sergueeva AV.;Stolyarov VV.;Valiev RZ.;Mukherjee AK. .Superplastic behaviour of ultrafine-grained Ti-6A1-4V alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):318-325.
[9] Wang, Y.C.;Langdon, T.G..Influence of phase volume fractions on the processing of a Ti-6Al-4V alloy by high-pressure torsion[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:861-867.
[10] Megumi Kawasaki;Byungmin Ahn;Terence G. Langdon .Microstructural evolution in a two-phase alloy processed by high-pressure torsion[J].Acta materialia,2010(3):919-930.
[11] Cheng Xu;Sergey V.Dobatkin;Zenji Horita;Terence G. Langdon .Superplastic flow in a nanostructured aluminum alloy produced using high-pressure torsion[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2009(1/2):170-175.
[12] Aicha Loucif .Ultrafine grains and the Hall-Petch relationship in an Al-Mg-Si alloy processed by high-pressure torsion[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2012,532:139.
[13] Zherebtsov, S.;Kudryavtsev, E.;Kostjuchenko, S.;Malysheva, S.;Salishchev, G..Strength and ductility-related properties of ultrafine grained two-phase titanium alloy produced by warm multiaxial forging[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:190-196.
[14] Sergry Zherebtsov .Strengthening of a Ti-6Al-4V titanium alloy by means of hydrostatic extrusion and other methods[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2009,515(1-2):43.
[15] A.K. Padap .Warm multiaxial forging of AISI 1016 steel[J].Materials & design,2010(8):P.3816.
[16] Dengke Yang;Pavel Cizek;Peter Hodgson .Ultrafine equiaxed-grain Ti/Al composite produced by accumulative roll bonding[J].Scripta materialia,2010(5):321-324.
[17] Kent, D.;Xiao, W.L.;Wang, G.;Yu, Z.;Dargusch, M.S..Thermal stability of an ultrafine grain Β-Ti alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:582-587.
[18] Vasile-Danut Cojocaru;Doina Raducanu;Doina Margareta Gordin.Texture evolution during ARB (Accumulative Roll Bonding) processing of Ti-10Zr-5Nb-5Ta alloy[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2013:260-269.
[19] Hirofumi Yoshimura;Jun Nakahigashi .Ultra-fine-grain refinement and superplasticity of titanium alloys obtained through protium treatment[J].International journal of hydrogen energy,2002(7/8):769-774.
[20] M. A. Murzinova;G. A. Salishchev;D. D. Afonichev .Formation of nanocrystalline structure in two-phase titanium alloy by combination of thermohydrogen processing with hot working[J].International journal of hydrogen energy,2002(7/8):775-782.
[21] Jun Nakahigashi;Hirofumi Yoshimura .Ultra-fine grain refinement and tensile properties of titanium alloys obtained through protium treatment[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2002(0):384-388.
[22] 杨扬.氕处理法制备细晶粒、超细晶粒钛合金及其机械性能研究[J].稀有金属与硬质合金,2005(01):57-60.
[23] Nadakuduru, V.N.;Zhang, D.L.;Cao, P.;Chiu, Y.L.;Gabbitas, B. .The mechanical behaviour of an ultrafine grained Ti-47Al-2Cr (at%) alloy in tension and compression and at different temperatures[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(13/14):4592-4599.
[24] Yu H B .Synthesis of an ultrafine grained TiAl based alloy by subzero temperature milling and HIP,its microstructure and mechanical properties[J].Journal of Alloys and Compounds,2009,474(1-2):105.
[25] Zhao Z L .The microstructure and properties of ultra-fine grained Ti-17 powder compact improvéd through isothermal forging[J].Journal of Materials Processing Technology,2012,212(07):1495.
[26] Y.L. Hao;Z.B. Zhang;S.J. Li .Microstructure and mechanical behavior of a Ti-24Nb-4Zr-8Sn alloy processed by warm swaging and warm rolling[J].Acta materialia,2012(5):2169-2177.
[27] Qian Jiang Sun;G.C. Wang;M.Q. Li .The superplasticity and microstructure evolution of TC11 titanium alloy[J].Materials & design,2011(7):3893-3899.
[28] G. He;J. Eckert;W. Loser .Composition dependence of the microstructure and the mechanical properties of nano/ultrafine-structured Ti-Cu-Ni-Sn-Nb alloys[J].Acta materialia,2004(10):3035-3046.
[29] 宋杰 .热氢处理对(TiB+TiC)/Ti-6Al-4V复合材料 微观组织和力学性能的影响[D].上海交通大学,2011.
[30] 赵永庆,曹兴民,奚正平.热氢处理对两相钛合金及β钛合金加工态组织的影响[J].稀有金属材料与工程,2007(07):1145-1148.
[31] Effect of hydrogen on superplastic deformation of (TiB + TiC)/Ti-6Al-4V composite[J].International journal of hydrogen energy,2009(19):8308-8314.
[32] X.W. Liu;Y.Q. Su;L.S. Luo;K. Liv;F.Y. Dong;J.J. Guo;H.Z. Fu .Effect of hydrogen treatment on solidification structures and mechanical properties of TiAl alloys[J].International journal of hydrogen energy,2011(4):3260-3267.
[33] 张鹏省,曾卫东,赵永庆.钛及钛合金热氢处理技术[J].热加工工艺,2009(12):133-136.
[34] 曹超 .Ti-47Al-2Cr-2Nb-Y合金的热机械处理及组织性能研究[D].哈尔滨工业大学,2010.
[35] Sun BB;Sui ML;Wang YM;He G;Eckert J;Ma E .Ultrafine composite microstructure in a bulk Ti alloy for high strength, strain hardening and tensile ductility[J].Acta materialia,2006(5):1349-1357.
[36] Ma E .Instabilities and ductility of nanocrystalline and ultrafine-grained metals[J].Scripta Materialia,2003,49(07):663.
[37] Koch C C .Optimization of strength and ductility in nanocrystalline and ultrafine grained metals[J].Scripta Materialia,2003,49(07):657.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net