通过数值模拟,分析了倾角不同板片组合的板式换热器单流道模型换热和阻力的情况,并结合场协同理论进行分析.模拟结果表明:传热因子j、阻力因子f及面积质量因子J/f均随Re的增大而降低,其值均偏向于倾角较小的板片组合.协同角θ随着Re的增大先增大后基本不变,场协同数Fc随着Re的增大而下降,倾角较大组合的协同性要优于倾角较小的组合.j、f均随着上壁面倾角风的增大而增大,在下壁面倾角βb≤60时变化趋势较大,βb＞ 60时,变化趋势降低.倾角不同的板片组合换热器的性能介于构成“热混合”的常规板片性能之间.
参考文献
| [1] | LUAN Zhi-jian,ZHANG Guan-min,TIAN Mao-cheng,FAN Ming-xiu.FLOW RESISTANCE AND HEAT TRANSFER CHARACTERISTICS OF A NEW-TYPE PLATE HEAT EXCHANGER[J].水动力学研究与进展B辑,2008(04):524-529. |
| [2] | 张井志,田茂诚,张冠敏,冷学礼.板式换热器触点分布对换热阻力性能的影响[J].山东大学学报：工学版,2012(06):121-126. |
| [3] | B. PRABHAKARA RAO;SARIT K. DAS .Effect of Flow Distribution to the Channels on the Thermal Performance of the Multipass Plate Heat Exchangers[J].Heat Transfer Engineering,2004(8):48-59. |
| [4] | Wei Li;Hong-xia Li;Guan-qiu Li;Shi-chune Yao.Numerical and experimental analysis of composite fouling in corrugated plate heat exchangers[J].International Journal of Heat and Mass Transfer,2013:351-360. |
| [5] | T. S. Khan;M. S. Khan;Ming-C. Chyu;Z. H. Ayub .Experimental investigation of single phase convective heat transfer coefficient in a corrugated plate heat exchanger for multiple plate configurations[J].Applied thermal engineering: Design, processes, equipment, economics,2010(8/9):1058-1065. |
| [6] | GUO Zengyuan.Mechanism and control of convective heat transfer-- Coordination of velocity and heat flow fields[J].科学通报(英文版),2001(07):596-599. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%