欢迎登录材料期刊网

材料期刊网

高级检索

为了获得准确表征纤维束界面强度的方法,对影响纤维束界面强度的因素进行了研究.通过顶出方法对纤维束界面强度进行表征,利用SEM和Micro-CT研究了纤维束界面层微结构对纤维束界面强度的影响,并通过有限元分析方法对纤维束界面的断裂行为进行分析.结果表明:在纤维束界面层含有不同程度的脱粘和裂纹缺陷结构,影响了纤维束的界面强度,其测试结果具有较高的离散性,但其符合Weibull分布;纤维束界面层破坏过程具有由弱结合区域到强结合区域的渐进性.纤维束界面层微结构的差异性和界面层破坏的渐进性是产生纤维束界面强度测试结果离散的主要原因.

In order to obtain the characterization method of fiber-bundle/matrix interfacial strength,the influencing factors of interfacial strength were researched.Fiber-bundle/matrix interfacial strengths were characterized by push-out method.The effects of microstructures in interlayer on interfacial strength were studied through SEM and Micro-CT,and the failure behaviors of interlayer were analyzed by finite element method.The results showed that deflect structures of debonding and crack in interlayer affected interfacial strength and their failure behaviors in the push-out test.The data of fiber-bundle/matrix interfacial strength were discrete,but met Weibull′s distribution.The stress distribution in interlayer was uneven,and their interfacial failure grew from weak bonding region to strong bonding region.These were the reasons for the discrete data of interfacial strength.

参考文献

[1] 刘皓,李克智,李贺军,卢锦花,翟言强.纤维表面处理对C/C复合材料组织与性能的影响[J].材料科学与工艺,2007(01):19-21,26.
[2] 孟松鹤,陈妮,许承海,白光辉,韦利明.多向编织炭/炭的复合材料烧蚀性能[J].哈尔滨工业大学学报,2010(03):393-397.
[3] Takuya Aoki;Yuhsuke Yamane;Toshio Ogasawara .Measurements of fiber bundle interfacial properties of three-dimensionally reinforced carbon/carbon composites up to 2273 K[J].Carbon: An International Journal Sponsored by the American Carbon Society,2007(2):459-467.
[4] K. HONDA;Y. KAGAWA .DEBONDING CRITERION IN THE PUSHOUT PROCESS OF FIBER-REINFORCED CERAMICS[J].Acta materialia,1996(8):3267-3277.
[5] Kerans RJ.;Lamon J.;Rebillat F. .FIBER-MATRIX INTERFACE PROPERTIES OF SINGLE-FIBER MICROCOMPOSITES AS MEASURED BY FIBER PUSHIN TESTS[J].Journal of the American Ceramic Society,1997(2):506-508.
[6] Sakai M. .The pull-out and failure of a fiber bundle in a carbon fiber reinforced carbon matrix composite[J].Carbon: An International Journal Sponsored by the American Carbon Society,2000(15):2123-2131.
[7] Ludovic Valette;Dominique Rouby;Christophe Tallaron .Analysis of pull-out and failure of unidirectional bundles in a laminated carbon/carbon composite[J].Composites science and technology,2002(4):513-518.
[8] Wu DF;Zhou JC;Li YD .Methods for estimating Weibull parameters for brittle materials[J].Journal of Materials Science,2006(17):5630-5638.
[9] 孟松鹤,阚晋,许承海,韦利明.微结构对碳/碳复合材料界面性能的影响[J].复合材料学报,2010(01):129-132.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%