由于航空、航天用零部件对材料比强度有很高的要求，因此钛合金作为一种高比强合金在航空、航天领域的应用越来越多，而且这类零部件常采用薄壁复杂结构。若采用水冷坩埚方式熔炼钛合金，会导致钛合金熔体流动性差，因此，离心铸造方法已成为钛合金薄壁复杂铸件精密成形的主要方法。介绍了离心场下钛合金铸件精密铸造成形理论及技术的发展过程，在此基础上总结了离心场下钛合金熔体的充型、凝固行为及铸件缺陷形成规律，提出了立式离心铸造技术改进方案，并对未来离心场下成型理论与技术的发展提出了展望。
As the aviation, aerospace components has high specific strength of the material requirements, so as high specific strength titanium alloys in the aviation, aerospace applications, more and more of these components often used in thin-walled and complex structure. If the water-cooled crucible melting titanium alloy way, will lead to titanium melt flow is poor, therefore, centrifugal casting method of thin-walled titanium complex has become the main method of forming precision castings. The development process of theory and technology concerning precision forming of titanium alloy castings in centrifugal field was introduced, followed by a summary of the formation law of casting defects, solidification behavior and mold filling of titanium alloy in this paper, and thus the improvement scheme of vertical centrifugal casting was proposed. Finally, the development of forming theory and technology in centrifugal field was pointed out to aid future work.
参考文献
| [1] | 梁作俭,许庆彦,李俊涛,李世琼,张继,柳百成,仲增墉.Ti-Al合金精密铸件微观缩松预测[J].金属学报,2003(03):278-282. |
| [2] | Wu M;Augthun M .Numerical Simulation of the Casting Process of Titanium Removable Partial Denture Frameworks[J].Journal of Materials Science: Materials in Medicine,2002,13:301-306. |
| [3] | 李锡年.立式离心铸造技术及其应用[J].铸造技术,1999(01):10. |
| [4] | 盛文斌 .TiAl基合金排气阀金属型离心铸造过程研究[D].哈尔滨工业大学,2000. |
| [5] | Sheng W B;Guo J J;Su Y Q .Forming Mechanism of Gaseous Defect in Ti-48Al-2Cr-2Nb Exhaust Valves Formed with Permanent Mold Centrifugal Casting Method[J].Journal of Materials Science and Technology,2001,17(05):569-571. |
| [6] | Xu D M;Ma H L;Guo J J.Numerical Simulation for Mold-Filling and Coupled Heat Transfer Processes of Titanium Shaped Castings under Centrifugal Forces[A].,2007:151-158. |
| [7] | 贾丽敏 .钛合金离心精密铸造凝固组织与力学性能分析[D].哈尔滨工业大学,2006. |
| [8] | 徐达鸣,李鑫,安阁英,郭景杰,贾均.钛合金离心精密铸造充型过程计算机模拟[J].铸造,2002(01):39-43. |
| [9] | Li Changyun;Wu Shiping;Guo Jingjie .Model experiment of mold filling process in vertical centrifugal casting[J].Journal of Materials Processing Technology,2006(1/3):268-272. |
| [10] | 吴士平 .TiAl基合金排气阀金属型离心铸造过程数值模拟[D].哈尔滨:哈尔滨工业大学,2003. |
| [11] | 王志刚 .钛合金立式离心精密铸造凝固组织数值模拟[D].哈尔滨工业大学,2007. |
| [12] | 王志刚 .钛合金立式离心精密铸造缩孔缩松预测[D].哈尔滨:哈尔滨工业大学,2006. |
| [13] | 历长云 .钛合金立式离心铸造充填及凝固过程研究[D].哈尔滨:哈尔滨工业大学,2007. |
| [14] | 隋艳伟 .钛合金立式离心铸造缺陷形成与演化规律[D].哈尔滨工业大学,2009. |
| [15] | 叶喜葱 .离心压力下凝固组织形成热力学与动力学分析[D].哈尔滨工业大学,2006. |
| [16] | 张新平,于思荣,孟长生,何镇明.离心加速条件下金属凝固过程及缩孔缺陷数值分析[J].铸造,2000(10):785-788. |
| [17] | 李俊峰,杨留栓.立式离心铸造中缩松缩孔预测的数值模拟[J].矿山机械,2002(12):43-45. |
| [18] | 曾兴旺,陈立亮,刘瑞祥.离心铸造数值模拟技术的研究与开发[J].铸造,2004(04):310-313. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%