欢迎登录材料期刊网

材料期刊网

高级检索

热障涂层的残余应力是影响其服役寿研究不多.在45钢基体上,用超音速火焰喷涂NiCocrAlY打底层,再用大气等离子喷涂ZrO2-8%(质量分数)Y2O3(8YSZ)工作层,制备了纳米结构与传统结构2种类型的热障涂层(TBC).采用SEM、XRD对这2种涂层的粉末及涂层进行了组织结构分析,用纳米压痕仪测得了2种涂层的弹性模量.用X射线衍射应力测试仪测得了2种涂层的表层残余应力.结果表明:喷涂工艺参数相同条件下,对于打底层及工作层的厚度均相同的2种涂层,纳米结构热障涂层的表层残余应力比传统结构热障涂层约低24.7%;相同打底层的纳米结构热障涂层表层残余应力随着陶瓷层厚度增加而增加,陶瓷层厚度在240 um以下时,表层为残余压应力;厚度超过300 um时,表层为残余拉应力.最后提出了相应的物理力学模型.

参考文献

[1] Reza Soltani;Thomas W. Coyle;Javad Mostaghimi .Creep Behavior of Plasma-Sprayed Zirconia Thermal Barrier Coatings[J].Journal of the American Ceramic Society,2007(9):2873-2878.
[2] Guo HB.;Gong SK.;Xu HB. .Evaluation of hot-fatigue behaviors of EB-PVD gradient thermal barrier coatings[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):261-269.
[3] Schlichting KW.;Padture NP.;Jordan EH.;Gell M. .Failure modes in plasma-sprayed thermal barrier coatings[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):120-130.
[4] Wangang Xie;Eric Jordan;Maurice Gell .Stress and cracking behavior of plasma sprayed thermal barrier coatings using an advanced constitutive model[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1/2):50-58.
[5] Lee G;Atkinson A;Selcuk A .Development of residual stress and damage in thermal barrier coatings[J].Surface & Coatings Technology,2006(7):3931-3936.
[6] V. Teixeira;M. Andritschky;W. Fischer;H. P. Buchkremer;D. Stover .Effects of deposition temperature and thermal cycling on residual stress state in zirconia-based thermal barrier coatings[J].Surface & Coatings Technology,1999(0):103-111.
[7] Karadge M;Zhao X;Preuss M;Xiao P .Microtexture of the thermally grown alumina in commercial thermal barrier coatings[J].Scripta materialia,2006(4):639-644.
[8] Portinha A;Teixeira V;Carneiro J;Beghi MG;Bottani CE;Franco N;Vassen R;Stoever D;Sequeira AD .Residual stresses and elastic modulus of thermal barrier coatings graded in porosity[J].Surface & Coatings Technology,2004(0):120-128.
[9] Sarikaya O;Islamoglu Y;Celik E .Finite element modeling of the effect of the ceramic coatings on heat transfer characteristics in thermal barrier applications[J].Materials & Design,2005,26:357-362.
[10] J. Thornton;S. Slater;J. Almer .The Measurement of Residual Strains Within Thermal Barrier Coatings Using High-Energy X-Ray Diffraction[J].Journal of the American Ceramic Society,2005(10):2817-2825.
[11] Padture NP;Gell M;Jordan EH .Materials science - Thermal barrier coatings for gas-turbine engine apptications [Review][J].Science,2002(5566):280-284.
[12] V. Teixeira;M. Andritschky;W. Fischer;H. P. Buchkremer;D. Stover .Analysis of residual stresses in thermal barrier coatings[J].Journal of Materials Processing Technology,1999(0):209-216.
[13] Mao W G;Zhou Y C;YangL et al.Medeling of residual stresses variation with thermal cycling in thermal barrier coatings[J].Mechanics of Materials,2006,38:1 118-1 127.
[14] Zhang X C;Xu B S;Wang H D et al.Modeling of the residual stresses in plasma-spraying functionally graded ZrO2/NiCoCrAlY coatings using finite element method[J].Materials & Design,2006,27:308-315.
[15] Sujanto Widjaja;Andi M. Limarga;Tick Hon Yip .Modeling of residual stresses in a plasma-sprayed zirconia/alumina functionally graded-thermal barrier coating[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2003(1/2):216-227.
[16] Wang Y;Tian W;Yang Y .Thermal shock behavior of nanostructured and conventional Al2O3/13wt%TiO2 coatings fabricated by plasma spraying[J].Surface and Coatings Technology,2007,201:7 746-7 754.
[17] 林锋,于月光,蒋显亮,曾克里,任先京,李振铎.等离子体喷涂纳米结构热障涂层微观组织及性能[J].中国有色金属学报,2006(03):482-487.
[18] J.F. Li;H. Liao;X.Y. Wang;C. Coddet;H. Chen;C.X. Ding .Plasma spraying of nanostructured partially yttria stabilized zirconia powders[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2004(1/2):101-115.
[19] ZhouC;WangN;XuHB .Comparison of tbermal cycling behavior of plasma-sprayed nanostructured and traditional thermal barrier coatings[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2007,452-453:569-574.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%