欢迎登录材料期刊网

材料期刊网

高级检索

以NiCr/Cr3C2-10% CaF2(质量分数,%)复合粉末为原料,采用激光熔覆技术在Ti-6Al-4V合金表面成功制备出了y-NiCrAlTi/TiC/CaF2高温自润滑耐磨复合涂层.为研究该复合涂层的高温稳定性,在600℃下分别对该复合涂层保温24、48、96 h,并分别研究了不同保温时间下复合涂层的物相、显微硬度、摩擦学性能的变化及其机理.结果表明:高温处理前后复合涂层物相组成基本不变,由于γ-NiCrAlTi固溶体的溶解,涂层显微硬度下降约110 HV0.3;高温处理前后涂层的摩擦系数及磨损率变化较小,在长时间高温保温情况下,涂层的组织和摩擦学性能都表现出良好的高温稳定性.

参考文献

[1] Moskalewicz T,Wendler B,Zimowski S,et al .Microstructure,micro-mechanical and tribological properties of the nc-WC/a-C nanocomposite coatings magnetron sputtered on non-hardened and oxygen hardened Ti-6Al-4V alloy[J].Surface and Coatings Technology,2010,205(7):2668-2677.,2010.
[2] 张晓伟,刘洪喜,蒋业华,王传琦,曾维华.Ti6Al4V合金表面激光熔覆功能复合涂层研究进展[J].稀有金属材料与工程,2012(01):178-183.
[3] Straffelini G,Molinari A .Dry sliding wear of Ti-6Al-4V alloy as influenced by the counterface and sliding conditions[J].Wear,1999,236
[4] 陈浩,潘春旭,潘邻,陶锡麒.激光熔覆耐磨涂层的研究进展[J].金属热处理,2002(09):5-10.
[5] 吕旭东,王华明 .激光熔敷MO2 Ni3 Si/NiSi金属硅化物耐磨复合材料涂层组织与抗磨性能[J].摩擦学学报,2003,23(3):183-187.L(U) Xu-dong,WANG Hua-ming.Microstructure and dry sliding wear resistance of laser clad MO2Ni3Si/NiSi metal silicide composite coatings[J].Tribology,2003,23 (3):183-187.,2003.
[6] XIANG Zhan-feng,LIU Xiu-bo,REN Jia,et al .Investigation of laser cladding high temperature anti-wear composite coatings on Ti6Al4V alloy with the addition of self-lubricant CaF2[J].Appl Surf Sci,2014,313
[7] 王维夫,王茂才,孙凤久.激光熔覆钛基复合涂层中原位自生TiC的形态特征与生长机制[J].金属热处理,2009(02):65-69.
[8] 陈华辉,徐采云,王振廷,赵会友.WC颗粒增强Ni基合金复合涂层的热处理组织变化[J].中国表面工程,2010(02):64-68,73.
[9] 卢雪飞,梅炳初,周卫兵,等 .放电等离子制备Ti3 AlC2/TiB2复合材料及性能[J].硅酸盐学报,2007,35
[10] 章小峰,王爱华,张祥林,乔晓勇,黄早文.激光熔覆Ni45-CaF2-WS2自润滑涂层组织与性能[J].中国有色金属学报,2008(02):215-220.
[11] 邱星武,李刚,邱玲.激光熔覆技术发展现状及展望[J].稀有金属与硬质合金,2008(03):54-57,66.
[12] 孟祥军,刘秀波,刘海青,等 .热处理对NiCr/Cr3 C2-WS2复合涂层组织与性能的影响[J].材料热处理学报,2013,34:188-193.MENG Xiang-jun,LIU Xiu-bo,LIU Hai-qing,et al.Effects of heat treatment on microstructure and performance of NiCr/Cr3C2-WS2 composite coatings[J].Transactions of Materials and Heat Treatment,2013,34(S2):188-193.,2013.
[13] LIU Xiu-Bo,LIU Hai-Qing,MENG Xiang-Jun,et al .Effects of aging treatment on microstructure and tribological properties of nickel-based high-temperature self-lubrication wear resistant composite coatings by laser cladding[J].Materials Chemistry and Physics,2014,143
[14] LIU Wen-gang,LIU Xiu-bo,ZHANG Zhen-guo,et al .Development and characterization of composite Ni-Cr-C-CaF2 laser cladding on γ-TiAl intermetallic alloy[J].Journal of Alloy and Compounds,2009,470
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%