欢迎登录材料期刊网

材料期刊网

高级检索

系统研究了丙烷裂解过程中纯镍表面的结焦形貌及其影响因 素.结果表明,纯镍表面的沉积焦炭有三种形貌,分别为纤维状、颗粒状和膜状.纤维状焦 炭在800℃左右形成,需要基底金属镍的参与,预氧化后的镍表面显著加剧这种焦炭的沉积 .提高结焦温度或延长结焦时间,结焦机制发生转变,焦炭形貌也逐渐转变为颗粒状.颗粒 状焦炭形成于气相反应,与基底金属镍无关.膜状焦炭形成于结焦初期,溶解/析出机制及 表面直接形核、生长机制均对其形成有贡献.抑制纤维状焦炭的形成有益于减轻镍表面总的 结焦程度.

Surface coking morphology of pure nickel and its correlative factors w ere investigated systematically.Results reveal that the coke deposited on surf ace of pure nickel includes the filamentary coke,the particlelike coke,and th e filmlike coke.Deposition of the filamentary coke happens at approximate 800 ℃ and is closely dependent on the nickel substrate.Preoxidation markedly aggr avates the deposition of the filamentary coke on surface of pure nickel.Either raising the coking temperature or prolonging the coking time results in change o f the coking mechanism,and the deposited coke tends to show a particlelike mor phology.Since the particlelike coke is derived from a series of gasphase rea ctions,it bears no relation to the nickel substrate naturally.The filmlike cok e is only deposited at the initial coking stage.Both the dissolution/precipitat ion mechanism and the direct nucleation/growth mechanism may make a contribution to development of the filmlike coke.Restraining the formation of the filament ary coke can be beneficial to alleviate the totally coking degree on the nickel surface.

参考文献

[1]
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%