研究了酸洗工艺对电镀镍镀层与烧结钕铁硼基体间结合强度的影响.结果表明:经过酸洗之后,钕铁硼基体表面层变成了疏松结构,表面的显微硬度降低,镍镀层与钕铁硼基体结合强度随酸洗时间的增加而逐渐降低.通过分析剥离层的横截面发现,镀层与基体的剥离面位于钕铁硼基体内部,而不是镀层与基体的结合界面.采用垂直拉伸的剥离方法测量结合强度,表面和断面形貌通过SEM进行观察,利用维氏硬度计测量钕铁硼经过酸洗后的表面维氏硬度.
参考文献
| [1] | Herbst J F;Croat J J .[J].Journal of Magnetism and Magnetic Materials,2004,279:353. |
| [2] | Saliba-Silva A;Faria RN;Baker MA;Costa I .Improving the corrosion resistance of NdFeB magnets: an electrochemical and surface analytical study[J].Surface & Coatings Technology,2004(2/3):321-328. |
| [3] | Tamborim Takeuchi S M;Azambuja D S;Saliba-Silva A M et al.[J].Surface and Coatings Technology,2006,200:6826. |
| [4] | Bala H;Szymura S;Wyslocki J J .[J].IEEE Transactions on Magnetics,1990,26(05):571. |
| [5] | Minwa T;Yoshihawa M;Honshima M .[J].IEEE Transactions on Magnetics,1989,25(05):3776. |
| [6] | KimA S;Camp F E .[J].Journal of Materials Engineering,1991,131:175. |
| [7] | Man H H;Man H C;Leung L K .[J].Journal of Magnetism and Magnetic Materials,1996,152:40. |
| [8] | Man H H;Man H C;Leung L K .[J].Journal of Magnetism and Magnetic Materials,1996,152:47. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%